BLAUPUNKT SBWL10 2.1 Wireless Soundbar Instruction Manual

BLAUPUNKT SBWL10 2.1 Wireless Soundbar

Product Information

The 2.1 Wireless Soundbar is a home audio system that offers wireless connectivity and multiple input options. It features a USB input for MP3 playback, a 3.5mm LINE input, an HDMI (ARC) input and a subwoofer output. The soundbar can be powered by an AC 110V-240V
50/60Hz power source.

The soundbar comes with a remote control that allows you to adjust the volume, select the input source and turn on/off the 3D sound feature. The soundbar has three EQ modes – SONG, CINEMA and DIALOG.

The soundbar can be mounted on the wall using the included screws and dowels. It is compatible with solid walls such as solid brick, solid concrete, solid wood, and solid wooden battens as well as drywall, plaster wall, lath wall, etc. The product comes with a 1-year warranty.

Product Usage

1. Plug in the soundbar to an AC 110V-240V 50/60Hz power source.
2. Press the “Source” button on the remote control to select an input source – Line in, Bluetooth, HDMI(ARC)in or USB.
3. Adjust the volume using the “+” and “-” buttons on the remote control.
4. Press the “3D ON/OFF” button on the remote control to turn on/off the 3D sound feature.
5. Select an EQ mode – SONG, CINEMA or DIALOG using the remote control.
6. If you want to mount the soundbar on the wall, drill two parallel holes in the wall and insert the dowels (included) into each hole. Insert a screw (included) into each dowel, leaving a 5mm gap between the wall and the screw’s head. Lift the soundbar over the heads of the screws and slot it into place.

Safety information

Important
Please read these instructions fully before installing or operating.

Power source

• This symbol means tent this unit is double Insulated. An earth connection Is not required.
• The appliance must be connected to a 110-240 Votic 50/60Hz AC supply by means of a three pin socket.
• Unplug this apparatus during lightning stoITTlS or wl7en unused for long periods of time – to prevent damage to this product.
• Opening or removing coveis may epose you to dangerous voltages or other hazards
• To prevent risk of fire or electric shock. avoid overloading wall outlets, extension cords, or integral convenience receptacles.
• Use suitable power sources – Plug the product Into a suitable power 50\Jne, as described in the operating instructions or as marked on tine product
• The supply voltage should be the same as that indicated in the technical specifications and tine appuance rating plate.
•  If the socket outlets in your home a re not so I table for the plug supped with this unit check with a qualified electrician for replacement.
• In order to disconnect the apparats from the mains completely, switch off ten outlet and remove the mains plug completely.
• Do not bend, strict, or pull ten supply cable in order to avoid electric stiock.
• Whet1 installed, the power socket must be within easy reach.
• Do not Install the unit In a connects space. Allow adequate ventilation to prevent heat build-up.
• For indoor use only.

Heat build up

• During use the unit will heat up, this is not a malfunction. II the unit Is used continuously at high volume levels, the unit temperature will
  rise considerably. Do not touch title unit to avoid potential bums.

Colour irregularity on TV screen
Colour irregularities may be seen on certain types of TV.

• If such an Irregularity Is seen we off the TV. then tum on again after 15 to 30 minutes.
• If the colour irregularity is still seen place the soundbar unit further away from the TV.

Moisture and water

• Do not use this apparatus near water or moisture.
• Do not use this product near a bathtub, washbowl, kitchen sink, and boundary tub, in a wet basement, near a swimming poo~ or anywhere else that water or moisture Is present.

Heat sources and flames

• Batteries shall not be exposed to e><essive heat such as sun, fire or the Uke
• To prevent list of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles.

Servicing and repairs

• Refer all servicing to qualified service personnel
• 5e!vicing is required when the apparatus has l> seen damaged in any way. such as liquid has been spilled or objects have fallen into ten apparatus; the apparatus has beef! exposed to rain or moisture, does not operate normally, or has been dropped.

Getting to know your Blaupunkt Soundbar

You’ll be up and running in no time.

Accessories

1. A sound bar
2.  A external subwoofer
3. Remote control
4. RCA audio cable x 2
5. Instruction manual
6. Wall mounting kits

You’ll be up and running in no time

1. HDMI (ARC) input
2. USB Input (Mp3 playback)
3. 3.5mm LINE input
4.  Subwoofer Output
5. Power : 6. Source : Press to select a input: Line in
6. Bluetooth, HDMI(ARC)in, USB.
7. Volume + and – : Press to adjust the volume up or down.

You’ll be up and running in no time.

You’ll be up and running in no time.

Making the connections
Follow the below connection guide to connect the soundbar to a TV with or without HDMI-ARC output, Bluray / DVD player or an audio source such as MP3 player. Only one digital connection to 1V is required. HDMI-ARC is recommended. DO NOT power on the mains until all connections are made.

Using your Blaupunkt Soundbar

Let’s get started

Using the HDMI (ARC) input

1. Connect the socket HDMI (ARC) by means of an ARC-enabled HDMI cable to an HDMI ARC socket of your television set.
2. Switch on the sound bar with the button 6 .
3. By pressing the HDMI (ARC) button on your remote control or one touch the Source button on the unit repeatedly to enter HDMl(ARC) mode, select the HDMI input.
4. Switch on the television set. When the connection is established for the first time, it may take several seconds until sound is output from the sound bar.

NOTE :

1. if you use the HDMI (ARC) connection, the soundbar is usually switched on and off via the remote control of the connected device. The connected device must support the CEC (Consumer Electronic Control) protocol.
2. The audio transmission via the HDMI (ARC) socket can only work if all components are ARC-enabled. If the transmission is unsuccessful, you must take one or possibly several of the following items into account:
   • The old HDMI cable must be replaced with a new ARC-enabled cable.
   • Not every HDMI socket on the television set needs to support ARC. In this case, the HDMI cable on the television set must be connected to another
   • ARC-enabled HDMI socket. Usually, the respective
   • HDMI sockets are labelled with ARC. If not, refer to the user instructions of your television set.
   • For several television sets, the digital audio output must be activated. Select the audio output PCM 2.0 (PCM stereo). If the audio output PCM 2.0
   • (PCM stereo) is not set on the television set, the soundbar will automatically switch off.

Pairing a bluetooth device

1. The operation range of bluetooth is approximately 10 meters (30 Feet). Any obstacles in the path between devices may reduce this range.

   • Only one Bluetooth device can be paired at a time.
   • Not all Bluetooth devices are compatible

   1.  Press the O button on the remote control or to one press the Source button on the main unit repeatedly to select the bluetooth mode
      to switch over to a Bluetoo0 the connection. LED display shows “but” flashing rapidly

   2. Switch on the bluetooth audio device ( e.g. smartphone) and start the bluetooth” connection.

   3. The bluetooth device will now receive the device identification as “BLAUPUNKT-SBW”

   4. Both devices are now interconnected. LED display “bt” stop flashing and paring sound is heard.

   5. There is No password required In Bluetooeh mode,the below buttons functions are available:

   6. When a device is connect to the sound bar system via Bluetooth, press and hold the PAIR PAIR button on the remote control for more than 2 seconds to disconnect the audio device from the sound bar.
      When a device is connect to the sound bar

   7.  system via Bluetooth0 ,press once to play or pause the current selected song. When a device is connect to the sound bar  system via Bluetooth, press once to skip to the next song.

   8. When a device is connect to the sound bar system via Bluetooth, press once to replay the  current song. Press twice to play the previous
      song.

Using your Blaupunkt Soundbar

Let’s get started

Using the LINE in

1. Plug one end of a 3.5mm audio input cable (included) into the LINE IN on the speaker bar. Plug the other end of the cable into the audio
   output/headphone output on an MP3 player or other audio source.

2. Press the LINE IN button on your remote control directly to enter LINE in mode or one touch the SOURCE button on the unit repeatedly to enter Line in mode.

3. Audio played through the connected device will now be heard through the speakers.

Input

|

Use

| Remote control button|

Display

---|---|---|---

HDMI

IARCI

| Connection with HDMI (ARQ cable,

e.g. to the HDMI

ARC connection of the television set, DVD player

|

HDMI

CARCJ

|

Hd

Bluetoottf’

| Radio connection,

e.g. smartphone

| a| bt

USB

| Connection withusb

cable eg. MP3 player

,telephone

| use|

U5b

LINEIN

| Connection with

3.5 mm stereo jack cable, e.g. MP3 player, telephone

|

LINEIN

|

L tnE

Using the USB playback for MP3

You can also enjoy music from a USB flash drive.

1. Press the Power button to tum on the soundbar.
2.  Press the USB button on the remote control to USB Mode or one press the Source button repeatedly to switch to USB Mode.
3. Plug in a lJS8 flash drive with preloaded Mp3 files.
4. The sound bare will automatically play Mp3 flies from the USB flash drive. Use the included remote to control music playback.

Adjusting the tone quality

NOTES:

• Changes to the tone quality are not stored when you change into a different mode.
• Press one of the SONG, CINEMA, DIALOG buttons to select the presets for the tone quality for music (SONG), films (CINEMA), dialogue (DIALOG).
• Press 3D On/Off button to select 3D tone quality when the soundbar is in the Q: SONG/CINEMA/ DIALOG.
• Use the TREBLE -/+ buttons to adjust the treble sounds.
• Use the BASS-/+ buttons to adjust the bass sounds.

Other information

Helpful technical information.

Wall mounting the soundbar

Accessories included

Firmly fix a dowel (included) into each hole in the wall if necessary. Insert a screw (included) into each dowel. Make sure to leave a 5mm gap between the wall and the screw’s head.

• In order to avoid damage to the unit and personal injury you should get a qualified person to drill the fixing surface and fit the appropriate wall fixings.
•  Take care not to allow the main unit to fall while attempting to hook onto the wall mount brackets. Before mounting, check the wall strength, if it is not clear then consult relevant qualified personnel.
• When drilling into walls, always check that there are no hidden wires or pipes etc.
• Make sure the screws & wall plugs are suitable for supporting the unit.
• Make sure to leave a 5mm gap between the wall and the screw’s head. Lift the Bar over the heads of the screws and slot into place.

Installing the remote battery

1. Press and slide the rear cover to open the battery compartment.
2. Insert 2 pieces of AAA size batteries (Not Included). Make sure the(+) and (-)ends of the batteries match the(+) and(-) ends as indicated.
3. Close the battery compartment accordingly.

Other information

Helpful technical information.

Technical specification

Main unit|
---|---
Input sensitivity| USB,Bluetooth,HDMI1000mV,LINE IN:1V
Power supply| INPUT: AC 110V-240V 50/60Hz
Full range speaker drivers Subwoofer| Impedance: 4 Ohm, 57.15mm(2.25″) Frequency response: 75 Hz – 20KHz Impedance: 4 Ohm, 203.2mm(8″)

Frequency response:32Hz ~132Hz

Remote control|
Batte,y| 2 x”AAA’size battery (Not Included)
Bluetooth|
Range| upto10m
Bluetooth version| V5.0
Frequency range| 2402MHz – 2480MHz

Care & maintenance

After using the soundbar.

Set to Standby.
Switch the unit off at the mains and unplug it if you are leaving it unattended for a long period (holidays etc). Avoid leaving the battery fitted in the remote control if you leave the unit unattended for long periods. It may leak and damage the remote control.

Care & cleaning
All care and cleaning operations should be carried out with the unit unplugged from the mains power. Occasionally wipe the cabinet with a lint free duster. Never clean the unit with liquids or solvents.

Product support

Help is always at hand

Troubleshooting

No power.

• Ensure the mains plug is connected to a power supply, and is switched ON.
•  Make sure there is power to the mains socket.

No sound?

BLAUPUNKT

• Make sure if playing from the AUX input, the external source has the volume turned up and is outputting sound.
• Make sure the volume is turned up.
•  If using HDMI-ARC, ensure the source Digital Output is set to PCM, LPCM, PCM 2CH stereo or PCM downmix
• Bluetooth device not paired. Check ‘Pairing a bluetooth device’.

No response from the soundbar

• Unplug the power cable for 1 minute then plug back in again.
• Remote control does not work.
• Reduce the distance between the remote and main unit
• Check the batteries are installed correctly.
• Replace the batteries
• Aim the remote directly at the sound bar

WARRANTY INFORMATION 1 YEAR

If you have issue with our 2.1 Wireless Soundbar product please contact our service center.

• Authorized Service Center Blaupunkt Speakers
• Address: Envent World Wide Pvt. Ltd.,
• Khasra No- 15/15 (4-16), Village Samalkha, Tehsil Vasant Vihar,
• New Delhi-110037

Whatsapp Chat Support: 8860022600
Please prepare and submit the following information during the telephone or e-mail notification to facilitate the process:

• Serial number

• Date of purchase

• A copy of proof of purchase in case of warranty
  Note
  Important information:

• Please use the original packaging or other suitable packaging to protect the unit in transit.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>