PCI RACE RADIOS Polaris PRO R GPS Elite and HDS Live GPS Bracket Installation Guide
- June 10, 2024
- PCI RACE RADIOS
Table of Contents
PCI RACE RADIOS Polaris PRO R GPS Elite and HDS Live GPS Bracket
Installation Guide
PROVIDED HARDWARE
- 4 Push Pins
-
6-32 x 1″ SS Phillips Pan head screw
-
6-32 Zinc NY lock Nut
-
6 Zinc Washer
TOOLS NEEDED
- Drill
- Oscillating Multi tool with blade
- 1/4“ Drill bit
- Silver Sharpie
INSTRUCTIONS
-
Remove cover on dash to expose the factory Ride Command mounting hole.
-
Place bracket on dash where it will be mounted.
a. Mark the 4 mounting holes with a silver sharpie. There are two on top and two on the bottom.
i. Use a 1/4” bit and drill all 4 holes
b. Mark and cut dash so the back of your GPS can recess into the hole.
-
Mount GPS to bracket.
NOTE: the Elite model has 4 individual covers in each corner and the HDS Live has a bezel around the whole GPS that needs to be removed to expose the through holes. -
Run power to GPS and connect.
-
Secure bracket to dash with 4 push pins.
Symbols
5 62-427-8177
www.pciraceradios.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>