ENDLESS POOLS D40076_0522 Hydraulic Treadmill User Guide
- June 10, 2024
- ENDLESS POOLS
Table of Contents
ENDLESS POOLS D40076_0522 Hydraulic Treadmill
Hydraulic Treadmill Operation
The optional hydraulic treadmill is operated using a remote control. Two
remote controls have been provided with your system and have been packaged
inside the power unit control box along with the antenna kit.
The treadmill is turned on through the use of the remote control, which also
adjusts the speed. PRESS the ON/OFF BUTTON (middle button) to TURN ON the
treadmill.
The treadmill will ALWAYS start at its lowest speed. PRESS & HOLD the FASTER
BUTTON (up button) to INCREASE the SPEED and the SLOWER BUTTON (down button)
to DECREASE the SPEED. When changing speed, you must press and hold the
buttons on the remote, then wait a few seconds for the treadmill to adjust.
Set the speed at a comfortable level for your needs.
PRESS the ON/OFF BUTTON to TURN OFF the treadmill. If left running, the power
unit will turn off automatically after thirty minutes and can be restarted by
pressing the on/off button again.
When learning to use the treadmill, it is best to start at the lowest speeds. If using the treadmill in conjunction with the swim current, the added resistance the swim current offers may allow for a slower treadmill then initially thought.
Digital Pace Display
The Digital Pace Display indicates the speed of the treadmill in miles per hour (or kilometers per hour). As the speed is increased, the value on the display will also increase. The Digital Pace Display can also be programmed to display percentage of the treadmill speed.
Hydraulic Treadmill Maintenance
After six years of operation, hydraulic system maintenance is required. We will send you a letter detailing our recommendation that the submerged hydraulic motor be replaced. Additionally, it is recommended to replace the hydraulic fluid and oil filter after 500 hours of use. A list of the recommended and optional replacement parts is supplied with the tune-up letter.