ENDLESS POOLS DMP-SAPPHIRE Fastlane Pro Deck Mount Current System Instruction Manual
- June 12, 2024
- ENDLESS POOLS
Table of Contents
DMP-SAPPHIRE Fastlane Pro Deck Mount Current System
Product Information
-
Product Name: Fastlane Pro
-
Manufacturer: Endless Pools
-
Model Number: EP-15.1.0
-
Material: NSF Listed 316L Stainless Steel
-
Power Requirements: 5hp 220V 30A GFCI [32A RCD
Protected] service required -
Compliance: APSP – 16 (VGB 2008)
compliant
Product Usage Instructions
-
Ensure that the remote power unit is located in a sheltered
location. -
Connect the Fastlane Pro to a 5hp 220V 30A GFCI [32A RCD
Protected] power source. -
Anchor the Fastlane Pro to the pool deck using the deck mount
brackets. -
Attach the hydraulic hoses from the Fastlane Pro to the remote
power unit. -
If the hydraulic hoses exceed 25 ft in length, a junction box
is required. -
Properly bond the Fastlane Pro by connecting the bonding wire
to the bonding lug. -
Ensure that the water chemistry is properly controlled,
especially when using salt chlorine generators. -
If using salt chlorine generators, it is recommended to use a
sacrificial anode to protect the Fastlane Pro and other pool
equipment.
Note: For specific details on installation, refer to the product
manual or contact Endless Pools customer support.
HAT CHANNEL
POOL WALL DECK/COPING EDGE HANGER BRACKET
DECKMOUNT BRACKET HOSE COVER
HOSE CLIP
REMOTE POWER UNIT IN SHELTERED LOCATION; 5hp 220V 30A GFCI [32A RCD PROTECTED] SERVICE REQUIRED
FASTLANE PRO
DECKMOUNT BRACKET HOSE COVER
DECKMOUNT BRACKET BOTTOM TRAY/PLATE
16 1/2″ [42 cm]
26 1/4″ [67 cm] 21 1/4″ [54 cm] 17″ [43 cm]
16″ [40.6 cm] DIAMETER
PROPELLER POOL WALL
SECTION A-A
POOL DECK/COPING
GRAB BAR PROPULSION BASE REMOVABLE FASTLANE PRO LID
TOP VIEW
26 1/4″ [67 cm] 21 1/4″ [54 cm] 17″ [43 cm]
18 1/2″ [47 cm] 16 1/4″ [41 cm]
BONDING WIRE BONDING LUG
SEE DETAILS A & B
DECKMOUNT BRACKET HOSE COVER
19″ [48 cm] HYDRAULIC HOSES TO REMOTE POWER UNIT
JUNCTION BOX (REQUIRED WHEN HOSES EXCEED 25 FT IN LENGTH)
1 1/4″ [3 cm]
38″ [97 cm]
WATER LINE
A
A
BOTTOM TRAY POOL DECK/COPING
POOL WALL DECKMOUNT HANGING BRACKET
PROPULSION HOUSING HAT CHANNEL
NSF LISTED 316L STAINLESS STEEL
PERFORATED SUCTION GRILL
1601 Dutton Mil Road, Aston PA 19014 www.endlesspools.com
swim@endlesspools.com 800-732-8660
29″ [74 cm] FRONT VIEW
LI STED
2001779
US
APSP – 16 (VGB 2008) COMPLIANT
19 1/4″ [49 cm] SIDE VIEW
NOTE:
POOLS UTILIZING SALT CHLORINE GENERATORS CAN POSE A SIGNIFICANT HAZARD TO POOL
EQUIPMENT, INCLUDING A FASTLANE PRO. PROPER BONDING AND WATER CHEMISTRY
CONTROL BECOME CRITICAL. USE OF SACRIFICIAL ANODE IS RECOMMENDED.
DECK MOUNT FASTLANE PRO
ANCHORED TO POOL DECK HYDRAULIC LINES ACROSS POOL DECK
FASTLANE DETAILS
2 1/4″ [6 cm]
HOSE CLIP HANGER BRACKET HAT CHANNEL
DETAIL B
HYDRAULIC HOSES TO REMOTE POWER UNIT
1 1/2″ [4 cm] MAX SUGGESTED COPING
OVERHANG
DETAIL A
POOL DECK/COPING
REMOVABLE FASTLANE PRO LID
WATERLINE
POOL WALL
DRAWING NO.
EP-15.1.0
REV:
2019/12/12
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>