LOST ARROW UBP21652M Helmets Instruction Manual
- June 5, 2024
- LOST ARROW
Table of Contents
HELMETS CASQUES
**HELME
**
| MODEL | SIZE | SIZE RANGE |
|---|---|---|
| A. HALF DOME | S/M | 50 – 58 cm (19.7-22.8 in) |
| M/L | 56 – 63 cm (22-24.8 in) | |
| B. WOMEN’S V_-9 HALF DOME | One Size | 50 – 58 cm (20 – 22.5 in) |
| C.VECTOR | S/M & Women’s | 53 – 59 cm (21 – 23 in) |
| M/L | 58 – 63 cm (23 — 25 in) | |
| D. VISION/ VISION MIPS | S/M & Women’s | 53 – 59 cm (21 — 23 in) |
| M/L | 58 – 63 cm (23 — 25 in) | |
| E. VAPOR | S/M | 53 – 59 cm (21 — 23 in) |
| M/L | 58 – 63 cm (23 – 25 in) | |
| F. KID’S TRACER | One Size | 49 – 57 cm (19 – 22.5 in) |
WARNING
For rock climbing, ice climbing and mountaineering use only. Climbing and
mountaineering are dangerous. Understand and accept the risks involved before
participating. You are responsible for your own actions and decisions. Do not
use this helmet for any motorized sport, bicycling, or any activity for which
it was not designed. Supervise all use of helmets by children to protect them
from strangulation. Some head injuries cannot be prevented by any helmet. Even
very low-force accidents can result in serious injury or death. No helmet can
protect against all foreseeable impacts; however, the wearing of a certified
helmet can reduce the risk of serious injury or death in some impact
situations. Before using this product, read and understand all instructions
and warnings that accompany it and familiarize yourself with its proper use,
capabilities, and limitations. Do not modify this product in any way. Failure
to read and follow these warnings can result in severe injury or death!
KEY:
: Risk of serious injury or death
: Risk of accident or injury
: Approved use
: Examination required
INSTRUCTIONS FOR USE
Your Black Diamond helmet is designed to protect your head from falling
objects and from impacts with stationary objects during a fall. Wear your
helmet whenever you are climbing and when rock falls or icefalls from above
are a possibility.
NOTE: The Vapor is a highly vented, lightweight helmet. It is not
recommended for situations that have significant rock fall potential. Extra
care is needed during transport.
CARE AND MAINTENANCE
(See accompanying illustrations)
INSPECTION, RETIREMENT, AND LIFESPAN
When to retire your equipment:
-
Climbing gear does not last forever. Inspect your gear before and after each use, and retire it when it fails inspection or when it reaches its maximum lifespan
– 10 years after the date of manufacture, even if unused and properly stored. Refer to the Markings section of these instructions in order to determine the date of manufacture of this equipment. -
Damage and extreme conditions may shorten your equipment’s useful life, and could conceivably require retiring the gear during its first use. Inspect your gear immediately whenever you suspect damage during use.
-
See the accompanying inspection illustrations. Retire immediately if any of the illustrated conditions are found.
-
If you have any doubts about the dependability of your gear, retire it.
-
Destroy retired gear to prevent future use.
-
Additional factors that may reduce the useful life of climbing gear:
Impact – both severe and mild, exposure to heat, sunlight, corrosives, solvents, fuels, battery acid or battery fumes. -
In the event that your helmet needs to be disinfected, we recommend that you retire it rather than expose it to harsh chemicals.
-
Long shelf life will reduce the possible useful life of the equipment.
STORAGE AND TRANSPORT
(See accompanying Illustrations)
ACCESSORIES AND SPARE PARTS
No accessories are available for Black Diamond helmets. The foam comfort pads
are replaceable parts on Black Diamond helmets and can be ordered through our
website, BlackDiamondEquipment.com, or by contacting Mail Order.
MARKINGS
The following marks are found on Black Diamond helmets: Black Diamond: Name
of the manufacturer.
: Black Diamond’s logo.
MFG. DATE: XX-XXXX: Month and year of manufacture.
EN 12492: This number indicates that this helmet conforms to EN
12492:2012, the European Standard for “Mountaineering equipment Helmets for
mountaineers Safety requirements and test methods.”
UIAA: The presence of the UIAA Label indicates that the helmet has been
tested according to UIAA 106 and awarded the UIAA Safety Label.
WARNING : Indicates the inherent dangers and responsibilities the user
assumes when using a Black Diamond helmet.
** : Pictogram advising users to read the instructions and warnings.
: The CE mark of conformity indicates fulfillment of the requirements of the
Personal Protective Equipment Regulation (EU 2016/425). The Declaration of
Conformity for this product may be viewed at
http://blackdiamondequipment.com/DOC
VECTOR, VISION, VISION MIPS, TRACER, HALF DOME, & WOMEN’S HALF DOME:
Notified body performing the EU Type Examination: TÜV SÜD Product Service
GmbH, Ridlerstraße 65, 80339 München, Germany, NB No 0123.
VAPOR: Notified body per forming the EU Type Examination: APAVE SUDEUROPE
SAS, CS 60193 – 13322 Marseille Cedex 16, France, NB No 0082. Black Diamond is
an ISO 9001-certified company.
LIMITED WARRANTY
** For one year following purchase unless otherwise indicated by law, we will
warrant to the original retail buyer only that our products are free from
defects in material and workmanship as originally sold. If you receive a
defective product, return it to us and we will replace it subject to the
following conditions: We do not warrant products that show normal wear and
tear or that have been used or maintained improperly, modified or altered, or
damaged in any manner.
North America: Black Diamond Equipment, Ltd.
2084 East 3900 South Salt Lake City, UT 84124
Europe: Black Diamond Equipment AG
Hans-Maier-Straße 9 6020, Innsbruck, Austria
BlackDiamondEquipment.com
© Black Diamond Equipment, Ltd. 2019
Documents / Resources
| LOST
ARROW UBP21652M
Helmets
[pdf] Instruction Manual
UBP21652M Helmets, UBP21652M, Helmets
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>