VIETA PRO VHP-NC400 Bluetooth Headset User Guide

June 10, 2024
Vieta Pro

PRO VHP-NC400 Bluetooth Headset
User GuideVIETA PRO VHP-NC400 Bluetooth Headset

What’s In The Box

VIETA PRO VHP-NC400 Bluetooth Headset - box

Charge

VIETA PRO VHP-NC400 Bluetooth Headset - charge

Buttons

| PLAY/ PAUSE
---|---
| VOICE ASSISTANT
| TURN ON/ OFF
| VOLUME UP
| NEXT SONG
| VOLUME DOWN
| PREVIOUS SONG
| ACTIVE NOISE CANCELING ON/ OFF
SHORT PRESS| DOUBLE PRESS| LONG PRESS| SWITCH
---|---|---|---

Bluetooth Mode

VIETA PRO VHP-NC400 Bluetooth Headset - bt 2

DUAL PAIRING MODE
Disconnect from device 1, and pair with device 2, then connect with device 1 again

Aux Mode

VIETA PRO VHP-NC400 Bluetooth Headset - aux

Tech Specs

Bluetooth version. 5.3.
Battery. Li-Ion 800 mAh.
Transmission distance. 15 m.
Battery – Music + ANC ON 30 h.
Battery – Music + ANC OFF 40 h.
Battery – Music OFF + ANC ON 60 h.
Input power. DC 5V 0.4A.
Charging port. USB type C.
Auxiliary connection. 3.5 mm minijack.
Dimensions. 180 x 190 x 76 mm.
Weight. 202g.

To prolong Battery Lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. Do not expose the Vieta Pro product to liquids without removing all cable connections and close the cap tightly. Do not expose Vieta Pro product to water while charging. It may result in permanent damage to the speaker or product, and power source.

The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc.
Compatible with Android and Apple Android’ is a trademark of Google Inc Apple is a trademark of Apple Inc.

FRAMASON AUDIO S A
C/ Tuyet 5-11 I 2º A 08006 Barcelona, Spain
www.vietapro.com

VIETA PRO VHP-NC400 Bluetooth Headset - icon 4

Europe: info@aqipa.com 
Americas: support@vietapro.com

Security

IMPORTANT SAFETY INSTRUCTIONS:
For all the products:

  1. Read and follow these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not block any ventilation openings. Install this product following the instructions.
  6. Do not install this product near any heat sources such as radiators, heat registers stoves or other devices (including amplifiers) that produce heat.
  7. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other, A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong I provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the  obsolete outlet.
  8. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the device.
  9. Use only attachments/accessories specified by the manufacturer.
  10. Unplug this device during lighting storms or when unused for long periods of time.
  11. To disconnect this device from the AC mains completely, disconnect the power-supply card plug from the AC receptacle.
  12. The mains plug of the power-supply cord shall remain readily operable.
  13. Do not expose batteries to excessive heat such as sunshine, fire or the like.
  14. This device is intended to be used only with the power supply and/or charging cable provided by the manufacturer.

PRECAUCION
RISK OF ELECTRIC SHOCK DO NOT OPEN

The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within product’s enclosure  that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY).
This device complies with part 15 of the FCC Rules. Operation is subject to following two conditions: 1) This device may not cause harmful interference.
this device must accept any interference received, including interference that may case undesired operation CAN ICES-3(B)/NMB-(3)B.
Federal Communication Commission Interference statement.
(FCC). This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful off and on, the user is encouraged to try to connect the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for

Caution: Changes or modifications not expressly approved by Vieta Pro could void the user’s authority to operate the equipment.

For Products that transmit RF Energy:
FCC AND IC INFORMATION FOR USERS:
This device complies with Part 15 of the FCC rules and Indrustry Canada license-exempt RSS stardard(s). Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received, including the interference that may cause undersired operation.

FCC/IC Radiation Exposure statement
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
For Wi-Fi 5G device. FCC Caution:
High power radars are allocated as primary user of the 5.25 to 5.35Ghz and 5.65 to 5.85GHz bands. These radars stations can

Caution: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time. The products have been tested to comply with the sound Pressure Level requirement laid down in the applicable NF EN 50332-1:2013 and/or EN 50332-2:2013 standards as required by French article L.5232-1.

Warranty

WHO IS PROTECTED BY THE WARRANTY.
This limited warranty (the limited Warranty”) protects only the original end-user (“you” or “your”), and is not transferable and is applicable only in the country (excluding EEA member states and the Russian Federation) in which you originally purchased your Vieta Pro product (the “Product”). Any attempt to transfer this warranty shall immediately make this warranty void.

LIMITED WARRANTY.
FRAMASON AUDIO S.A. is the manufacturer and through its local subsidiary, warrants to you that the Product (including components provided in/with the Product) will be free from defects in workmanship and materials for a period of ONE year from the date of retail purchase by you (the “Warranty Period”). During the Warranty Period, the Product (including components), will be repaired or replaced at Vieta Pro’s option, without charge for either parts or labor OR at Vieta Pro’s sole option, the price of the Product pro-rated over the remaining balance of the Warranty Period. Any warranty service or replacement of parts will not extend the Warranty Period.
This Limited Warranty does not cover defects which are a result of: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow the instructions contained in your owner’s manual; (5) damage resulting from the performance of repairs by someone other than an authorized Vieta Pro service center;  (6) deterioration of components parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads.

Furthermore, this Limited Warranty covers only actual defects withing the Product itself, and does not cover the costs of installation or removal from a fixed installation, setup or adjustments, claims based on misrepresentation by seller, performance variations resulting from installation-related circumstances such as source quality or AC power or Product modifications, any unit on which the serial number has been effaced, modified or removed, or units used for other than home use. This Limited Warranty is valid only for Vieta Pro  products purchased from an authorized dealer.
Except to the extent expressly prohibited in your jurisdiction by applicable law, all implied warranties, including fitness for a particular purpose and merchantability are hereby excluded and in no event shall Vieta Pro or any FRAMASON AUDIO S.A. subsidiary be liable for any indirect, direct, incidental, special or consequential loss or damages whatsoever (including, without limitation, other pecuniary loss) arising out of the use of or inability to use the Product, even if Vieta Pro and/or FRAMASON AUDIO S.A. subsidiary have been advised of the possibility of such damages. To any extent that FRAMASON AUDIO S.A. cannot lawfully disclaim implied warranties under this Limited Warranty, all such implied warranties are limited in duration to the duration of this warranty. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives your specific legal rights, and you may also have other rights that vary by jurisdiction.

HOW TO OBTAIN WARRANTY SERVICE.
Contact the dealer who sold you this Product, or contact Vieta Pro customer support using the contact information on the relevant country specific support website for your Product to request warranty service. To validate your right to this Limited Warranty, you must provide the original sales invoice or other proof of ownership and date of purchase. Do not return your Product without prior authorization from the corresponding dealer or Vieta Pro (FRAMASON AUDIO S.A.) Warranty repair of the Vieta Pro product must be carried out by and authorized dealer or service center. Unauthorized warranty repair will void the warranty and is performed at your sole risk.
You are also welcome to consult the relevant country specific Vieta Pro support website for your Product for helpful hints.

WHO PAYS FOR WHAT.
This Limited Warranty covers all expenses for labor and materials required for the repair OR replacement of the Product that is found to be defective, and a reasonable return shipping charge within the country of repair. Please be sure to save the original shipping carton(s), because a charge will be made for additional cartons/packaging.
You will be charged for the cost of examining a unit that is not in need of repair (including resulting shipping costs), or for necessary repairs not covered by this Limited Warranty.
We sincerely thank you for your expression of confidence in Vieta Pro.

Vieta Pro by FRAMASON AUDIO S.A. WARRANTY AGAINS DEFECTS FOR AUSTRALIA
This warranty against defects shall only apply to Products distributed by Vieta Pro (FRAMASON AUDIO S.A.) and sold to you within Australia after August 2021. Please refer to Vieta Pro’s Limited Warranty enclosed here for further information on Product warranty.

Warranty against defects:
Vieta Pro’s Products come with guarantees that cannot be excluded under the Australian Consumer Law. During the warranty period, you are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure goes not amount to a major failure. Subject to the terms and conditions herein and Vieta Pro’s Limited Warranty, Vieta Pro will repair or replace without charge any manufacturing defects that appear in Vieta Pro Products within the warranty period identified for the product in the first year, commencing on the date of the original purchase. You are entitled to have the defective Product repaired, replaced or a refund in accordance to your rights under law. The benefits given to you by this Warranty are in addition to other rights and remedies you may have under law and nothing in this Warranty purports to restrict, modify or exclude your legal rights as consumer under Australian Law. Check our web site www.vieta.es to know general information or firmware updates if the product needs it.

How to Claim:
To make a claim under this warranty, you should contact the seller who sold you the Product, or contact the Vieta Pro customer support team at service@vieta.es. You are responsible for the cost of returning the defective Product unless notified otherwise.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals