ESI U86 XT 24-Bit USB Audio Interface User Manual
- June 10, 2024
- ESi
Table of Contents
ESI U86 XT 24-Bit USB Audio Interface User Manual
Introduction
This text describes how to install the U86 XT driver under Windows 10 (32- or 64 bit). The process is virtually the same for Windows 7, Windows 8 and Windows 8.1.
Preparation
If U86 XT is connected to your computer with the USB cable, disconnect it now and make sure it is turned off. You will need to connect it again later during the installation.
Make sure that you have downloaded and unzipped the driver file with the driver you are about to install.
Installation
To start the installation, launch the setup program, which is an .exe file that is inside the driver download, by double clicking on it. Typically the filename is something like U86_XT_vX.YY_setup.exe where X.YY is the version number of the driver. When launching the installer, Windows might display a security message. Make sure to allow the installation. After that, the following dialog on the left will appear. Click on Next and the dialog on the **right will be shown:
**
Now click Install. Files are now being copied. After some time an additional dialog **will appear:
**
Confirm this by clicking Next. Again some files are being copied and typically you **will be prompted with a Windows Security message like this:
**
Confirm it by clicking Install. After a while the installation then will be completed and the following dialog on the left will appear. Once you see this, click Finish.
We strongly suggest to select Yes, restart the computer now and then click Finish on the dialog above right.
Once rebootet, you can connect U86 XT to your computer anytime if not done yet
and turn it on. Windows will automatically setup the system so you can use the
device. Once the system starts again and you are logged in with the hardware
connected, you will see by looking at the ESI icon in the taskbar
notification, that the U86 XT control panel is now automatically being loaded:
If you can see it, the driver installation has been completed successfully.
Uninstallation
In case you need to uninstall the driver at a later time, you will find it under Settings > System > Apps & features (under Windows 10) or in the list of installed Programs in Windows Control Panel (with previous Windows versions). You can simply remove it there.
Copyright © 1998-2023 ESI Audio Technik GmbH – All rights reserved.
www.esi-audio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>