ESI ESRTP6B WiFi Wireless Programmable Room Thermostat Instruction Manual

ESI ESRTP6B WiFi Wireless Programmable Room Thermostat

Product Overview

1. RF Connection Status
2. SET Temperature
3. ROOM Temperature
4. MODE Display
5. UP /DOWN Arrows
   • Temperature change
   • Navigate through menus
   • Change settings
6. HOME Button
   • Select options in menus
   • Change settings
7. MENU Button
   • Access menus & sub-menus
8. Return Button
   • Return to Home or previous screen
9. Flame Icon
   • Indicates heating is on
10. Tap Icon
    • Indicates hot water is on
11. Wi-Fi Connection Status

Setting The Time & Date

If your thermostat is not connected to your home Wi-Fi, you will need to follow these steps during initial setup & after a power outage.

|
---|---
Press HOME to wake the display. Press MENU & use to show SET TIME. Press HOME & use to choose either 12 or 24 hour clock. Press HOME| Press HOME to wake the display. Press MENU & use to show SET TIME. Press HOME & use to choose either 12 or 24 hour clock. Press HOME
|
---|---
Press HOME to enter the date settings. Use to change the date & HOME to move to the next digits.| Press SELECT to save your settings.

Heating Mode

To change the heating mode, tap the HOME button until the desired heating mode is selected:

• HOME – Programs will run.
• MANUAL- Manual mode will maintain the SET temperature constantly.
• AWAY -Away mode sets the user defined Away temperature. This is a permanent setting until the mode is changed.
• SLEEP – Sleep mode sets the user defined Sleep temperature. This mode will continue until the first program of the following day.

Setting Sleep & Away Temperatures

|
---|---
Press HOME to wake the display. Press MENU & use until you see SYSTEM MODE SETTINGS Press HOME. Use to choose either SLEEP or AWAY then press HOME.| Use to set your preferred SLEEP or AWAY temperature. Press HOME to save & use the RETURN BUTTON to exit the menu.

Temporary Override – Heating

When your ESi STRATUS is in HOME mode, you can temporarily override the current SET temperature by using the buttons. The temporary override will end when the next program starts which is indicated by the ‘TO’ time.

Temporary Override – Hot Water

Wake the display by pressing the HOME button. Touch & Hold the HOME button until HOT WATER BOOST is displayed. Use the buttons to select the desired setting. Press HOME to save your setting & use the RETURN BUTTON to get back to your HOME SCREEN.

Choose A Heating/Hot Water Schedule

|
---|---
Press HOME to wake the display. Press MENU & use to navigate to SET SCHEDULE. Use  to choose either HEATING or HOT WATER| Press HOME & use  to choose a schedule. Press HOME to save. There are 3 schedules to choose from: 7 Day 24 Hour or 5-2 Day.

7 Day- Different programs for each day. Every day will need to be set independently.
24 Hour – Every day will run the same programs.
5-2 Day- One program for weekdays with a different program for weekends.

Setting Heating Programs

Your ESi STATUS has a pre-set heating profile as shown below, which you can change to your own heating programs.

2o°C
2| 08:00 – 17:00| 15°C| 2| 09:30 – 16:30| 2o°C
3| 17:00 – 22:00| 21°C| 3| 16:30 – 22:30| 21°C
4| 22:00 – 06:00| 15°C| 4| 22:30 -07:30| 15°C
|
---|---
Press HOME to wake the the display. Press MENU and use to navigate to HEATING AND HOT WATER SCHEDULE.| Press HOME to enter HEATING SCHEDULE. Use to select the days you wish to change. Press HOME.

Press HOME.

|
---|---
Use to change the times and temperatures & HOME to confirm and move to the next time/temperature. Use HOME to save your Programs.| Repeat these steps until all programs have been set. Press HOME to save

Setting Hot Water Programs

|
---|---
Press HOME to wake the display Press MENU & use to navigate to HEATING AND HOT WATER SCHEDULE. Press HOME.| Use to select HOT WATER SCHEDULE. Press HOME & Use . to select the days you wish to change. Press HOME.
|
---|---
Use to set your 1st HOT WATER start time. Press HOME & use to set your 1st HOT WATER end time. Press HOME.| Repeat these steps until you have set all programs. Press HOME to save your settings & use the RETURN BUTTON to exit the menu.

Number of Programs

Your ESI STRATUS can run either 4 or 6 daily programs.

|
---|---
Press HOME to wake the display. HOLD the HOME until the display shows RF SETUP. Press HOME| Use to choose either 4 or 6 programs. Press HOME to save.

Display Settings – Brightness

|
---|---
Press HOME to wake the display, then press MENU. Use to navigate to DISPLAY. Press HOME.| Press HOME to enter  brightness settings.

Use to change the brightness level. Press HOME to save. Use the RETURN BUTTON to get back to your HOME SCREEN.

Display Settings – Display Modes

The ESI STRATUS has 3 different display modes.

|
---|---
Press MENU to wake the display. Use to navigate to AOD SETTINGS. Press HOME.| Use to navigate to AOD SETTINGS MODE Press HOME, you will see AOD MODE 1.Use  to see MODE 2 or MODE 3. Press HOME to select:

MODE 1 – display will always be on.
MODE 2 – display will stay on until your overnight program starts, then it will go to sleep.
MODE 3 – display will go to sleep after a short delay and will stay off until a button is pressed.

When you have chosen your Display Mode, use the RETURN BUTTON to get back to your HOME SCREEN.

Holiday Mode

Holiday mode will let you set a minimum temperature for the duration of your holiday. When Holiday Mode is set no programs will run.

|
---|---
Press HOME to wake the display. Press MENU and use to navigate to HOLIDAY SETUP. Press HOME.| Use to enter the number of days you expect to be away. Press HOME.
|
---|---
Use to set your minimum temperature while you are away. Press HOME.| Holiday Mode will start immediately. The display will show the number of days remaining until Holiday Mode ends. When Holiday Mode ends, HOME Mode will resume.

To cancel Holiday Mode at any time, tap the HOME button to wake the display, then tap  the HOME button twice.

Customer Support

Pairing With The ESi Centro App

You can use your smartphone or tablet to regulate your heating by downloading the ESi Centro app. Simply follow the instructions on the app to pair your thermostat to your home network.

Warning: Interference with sealed parts renders the warranty void.

In the interests of continuous product improvement, we reserve the right to alter designs, specifications and materials without prior notice and cannot accept liability for errors.

We are continuously developing our products to bring you the very latest in energy saving technology and simplicity. However, should you have any questions regarding setting up your controls please email us at [email protected]

Energy Saving Innovative Controls Limited
www.esicontrols.co.uk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>