ESI BB2657 Tracker Fitness Smart Watch User Manual
- June 5, 2024
- ESi
Table of Contents
ESI BB2657 Tracker Fitness Smart Watch
Wearing method
Best to wear the bracelet after the styloid of ulna;
Please fit the adjusting holes according to your wrist size, and then do up
the wristband buckle;
The sensor should cling to skin to avoid movement.
Charging the band
Please ensure the band has enough battery at your first time using it.
Please charge the band first if it cannot be powered on, and then the band
will automatically start working.
Power on/off
- In shutdown state, please long touch the function key over 4 seconds to start the device with vibration;
- In Power off page, long touch the function key for more than 3 seconds to enter the shutdown interface, and short touch to select YES, system will be powered off if no operation in 3 seconds.
Band operation
- In power on state, short touch the function key to light up the screen to default page with date and time information;
- In the default time/date page, short touch the function key can switch band to different pages. The screen will be turned off if no operation in 5 seconds.
- Switch to the heart rate / blood pressure page to start the measurement. The result will be displayed in 50s, and then the screen will be turned off automatically.
Install the band APP on the phone
To download and install “Yoho Band”, pls scan the QR code below, or search in APP Store.
System Requirements: Android 5.0 and above; iOS9.0 and above; Bluetooth 4.0 support.
Bundle the band to APP
For the first time using the band, please connect it to the APP to calibrate the time and date, otherwise the pedometer and sleeping monitor will not be accurate. The band will automatically be synchronized when successfully connected.
- After the band is bundled to APP successfully, the APP will save the band info, search and connect the band automatically if the APP is opened or running in the background.
- Pls ensure the band has all the required permissions of the system during installation or set the permission in your phone’s system settings, such as running in background and reading contact information.
APP functions and settings
Personal information
Please set personal information after entering the APP; Settings personal
settings, you can set the gender – age – height weight to ensure the accuracy
of distance and calorie calculation. You can also set your daily exercise and
sleep goals and monitor daily completion.
Message notification
Incoming call:
In the connected state, if the incoming call reminder function is enabled, the
band will vibrate when there is incoming call, and the name or number of the
incoming call will be displayed. (Need to set permission for APP to access
phone address book)
SMS notification:
In the connected state, if the SMS remind function is enabled, the band will
vibrate when there is a SMS.
Other remind:
In the connected state, if you turn on this feature, the band will vibrate
when there are WeChat, QQ, Facebook and other notifications on your phone, and
the message will be displayed on wristband. (Need to turn on the notification
in phone system, and set the permission of APP to access system
notifications).
Vibrating reminder
If turned on, the band will vibrate when there is a call, information or other reminder. If turned off, there will only be remind on screen without vibration, so as not to disturb you.
Sedentary reminder:
Set to enable/disable the sedentary reminder function. You can set the reminding interval in the profile, thus the band will remind if you sit for a long time over that interval.
Tips for Android phone users:
The reminder function needs to be set to allow “Yoho band” running in the
background; it is strongly recommended to add “Yoho band” in the entitlement
management to trusted list and allow all permission to enable full functions.
APP features and settings
Smart alarm clock
In the connected state, three alarm clocks can be set and synchronized to the
band; Offline alarm is supported. After successful synchronization, even if
the APP is not connected, the band will still alarm according to the set time.
Band display settings
In this option, you can set the display pages on your band. The enabled
function pages will switch one by one with your touch on function key, and
disabled function page will not appear.
Looking for band
In connected state, click the “Looking for band” option, the band wil
vibrate to cause your attention.
Shake to take selfie
In the connected state, enter the “shake to take selfie” in APP, shake the
band, and the APP will take photos automatically after 3 seconds countdown.
Please allow APP to access the camera and photo album to take and save the
selfie.
Function
Raise your hand to light up the screen: set the raise your hand to light up
the screen, and the screen will automatically light up every time you raise
your hand.
Sedentary switch: please set the time of sedentary reminder and save it.
Band display settings
Replace the dial background, select the time position and then sync to the
band. After the APP prompts for successful synchronization, the display can be
viewed on the band.
Band display instructions
Long touch for 2 seconds in each page to enter the sub-menu of that function.
Date and Clock
After synchronized with the phone, the date and clock on band will
automatically be calibrated.
Standby Settings: Long press in the theme interface to switch different
thenmes.
Pedometer
Wear a band to automatically record your daily activity. You can view the
real-time steps today.
Distance
Based on the number of your daily activity and your personal profile, the
distance you traveled will be displayed.
Calories
Based on your walking distance and your personal profile, the calories burned
will be displayed.
Heart rate, blood pressure
Switch to the heart rate or blood pressure interface, long touch to enter measurement page, and the result will be displayed in 40 seconds. This feature is only supported if the band has heart rate or blood pressure sensor.
Weather
After synchronizing with the mobile phone, you can enter the weather
interface to view the current weather, including: weather conditions, the
highest temperature, the lowest temperature and so on.
Music control
Enter the music control interface, can play or pause music and switch the
previous song or the next one.
Sleep mode
The bracelet will automatically monitor your sleeping status in night; it will
detect your sleep status with deep sleep / light sleep/awake times, calculate
your sleep quality; the result can be checked on APP.
Note:
The band will track sleeping status only when you wore it during your sleep in
night. Place the band somewhere will not trig the sleeping monitor. Sleeping
status from 9:00 pm to 9:00am will be recorded. Please synchronize your band
with APP after 9:00am the next day to upload the data before you check it.
Specifications
Notices:
- Take off your band before having shower or swimming.
- Please connect the band when synchronizing data.
- Use the 5V USB charging adapter.
- Do not expose the band in high moisture or extreme high temperatures.
Components
Host Wristband Charging cable Packing box and manual
APP Language:
English, SC,TC, Netherlands, Russian, French, German, Portuguese, Spanish,
Turkish, Japanese, Polish, Arabic, Malaysia, Thai, Czech, Slovak.
Wristband Language:
SC,TC, The European.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>