AMBIENTECH DT-24V-90W-N ZeroDrive Instruction Manual

June 10, 2024
AMBIENTECH

AMBIENTECH DT-24V-90W-N ZeroDrive

AMBIENTECH-DT-24V-90W-N-ZeroDrive-PRODUCT-IMG

ZeroDrive Product Information

ZeroDrive is an LED driver with quick specs as follows:

  • Input Voltage: Not specified
  • Output Voltage: Not specified
  • Ambient Temp: Not specified
  • Environment: Not specified

The product comes with dimming modes and can be installed using the instructions provided below.

Product Usage Instructions

Before beginning installation, please follow the safety precautions mentioned below:

  • To avoid fire, shock, or death, turn the power off at circuit breaker.
  • Test to ensure the power is off before wiring.

To use the dimming modes:

  • Press the button to choose mode.
  • Rotate dimming curve to your desired setting.

Installation Instructions

P/N: DT-24V-90W-N

Follow the steps below for installation:

  1. 1. Open wiring compartment.
    1. Punch knockouts for wiring conduit access.
    1. With the power switched off, connect the wires according to the wiring diagram provided below.
  2. Note: If you are connecting more than one wire to each terminal, it is recommended to form a pigtail connection.

Customer Assistance

If you have any technical questions regarding the installation or operation of this product, please contact our customer support team:

For more info, please refer to the user manual provided with the product.

Quick Specs

  • Input Voltage: 120-277VAC
  • Output Voltage: 24VDC
  • Ambient Temp: -30 °C – + 40 °C / -86°F – + 104°F
  • Environment: Dry and Damp

Before You Begin

To avoid fire, shock, or death, turn the power off at circuit breaker and test to ensure the power is off before wiring.

AMBIENTECH-DT-24V-90W-N-ZeroDrive-FIG-1

Dimming Modes

AMBIENTECH-DT-24V-90W-N-ZeroDrive-FIG-2

  • Press Button to Choose Mode / Rotate Dimming Curve

AMBIENTECH-DT-24V-90W-N-ZeroDrive-FIG-3

  1. Open wiring compartment.AMBIENTECH-DT-24V-90W-N-ZeroDrive-FIG-5
  2. Punch knockouts for wiring conduit access.

Wiring Diagram

With the power switched Off, connect the wires according to the wiring diagram below.
Note: If you are connecting more than one wire to each terminal, it is recommended to form a pigtail connection.

AMBIENTECH-DT-24V-90W-N-ZeroDrive-FIG-7

Customer Assistance

For technical questions regarding the installation or operation of this product, please contact our customer support team:

347-334-6368 ext 3 www.ambientechinc.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals