AMBIENTECH DT-24V-90W-N Tunable White Driver for LED Strip Lights Instruction Manual
- June 11, 2024
- AMBIENTECH
Table of Contents
AMBIENTECH DT-24V-90W-N Tunable White Driver for LED Strip Lights
Product Information
The product is an LED driver with the model number DT-24V-90W-N and is certified by E512089. It operates with an input voltage and output voltage that are not specified in the manual. The product has different dimming modes that can be selected by pressing a button or rotating the dimming curve. The ambient temperature environment that the product can operate in is not specified in the manual.
Product Usage Instructions
- Before beginning any installation, turn off the power at the circuit breaker and test to ensure that the power is off before wiring. This is important to avoid fire, shock, or death.
- Open the wiring compartment of the product.
- Punch knockouts for wiring conduit access.
- With the power switched off, connect the wires according to the wiring diagram provided in the manual. It is recommended to form a pigtail connection if you are connecting more than one wire to each terminal.
- The product has different dimming modes that can be selected by pressing a button or rotating the dimming curve. Choose the desired mode by pressing the button or rotating the dimming curve.
- The product can be controlled using a 0-10V wall switch for dimming or CCT (color temperature) adjustment.
- If you have any technical questions regarding the installation or operation of the product, please contact our customer support team at 347-334-6368 ext 3 or visit our website at www.ambientechinc.com for more information.
SPECIFICATION
Quick Specs
Input Voltage| 120-277VAC
Output Voltage| 24VDC
Ambient Temp| -30 °C – + 40°C / -86°F – + 104°F
Environment| Dry and Damp
Before You Begin
To avoid fire, shock, or death, turn the power off at the circuit breaker and test to ensure the power is off before wiring.
Dimming Modes
Press the Button to Choose Mode/Rotate Dimming Curve
Open wiring compartment
Punch knockouts for wiring conduit access
Wiring Diagram
With the power switched Off, connect the wires according to the wiring diagram below.
Note:
If you are connecting more than one wire to each terminal, it is recommended
to form a pigtail connection.
Customer Assistance
For technical questions regarding the installation or operation of this product, please contact our customer support team: