AMBIENTECH DT-24V-90W-W-N 4V Tunable White Driver Instruction Manual
- June 10, 2024
- AMBIENTECH
Table of Contents
AMBIENTECH DT-24V-90W-W-N 4V Tunable White Driver
Product Information
- Quick Specs: Input Voltage, Output Voltage, Ambient Temp, Environment
- Product Model: DT-24V-90W-W-N
- Product Type: LED Driver
- Certification: E512089
Product Usage Instructions
- Before You Begin: To avoid fire, shock, or death, turn the power off at circuit breaker and test to ensure the power is off before wiring.
- Select Dimming Mode: Use the Mode Button to select the desired dimming mode. The LED indicator will show either Green (Tunable White) or Red (Dim-to-Warm).
- Open Wiring Compartment: Open the wiring compartment to access the wiring terminals.
- Punch Knockouts: Punch out the knockouts for wiring conduit access.
- Connect the Wires: With the power switched off, connect the wires according to the wiring diagram provided. If connecting more than one wire to each terminal, it is recommended to form a pigtail connection.
- Connect to Wall Switch: Use a 0-10V Wall Switch to control the intensity and CCT (Color Correlated Temperature) of the LED lights. Connect each wire to the appropriate terminal, as indicated on the wiring diagram.
- ZeroDrive: The ZeroDrive feature ensures that there is no flicker or delay when turning on the LED lights.
Customer Assistance
If you have any technical questions regarding the installation or operation
of this product, please contact our customer support team:
- Phone: 347-334-6368 ext 3
- Website: www.ambientechinc.com
Customer Assistance
For technical questions regarding the installation or operation of this
product, please contact our customer support team:
Quick Specs
- Input Voltage 120-277VAC
- Output Voltage 24VDC
- Ambient Temp -30 °C – + 40 °C / -86°F – + 104°F
- Environment Dry and Damp
Before You Begin
To avoid fire, shock, or death, turn the power off at circuit breaker and test to ensure the power is off before wiring.
Select Dimming Mode
LED Color Mode
Green| Tunable White
RED| Dim-to-Warm
-
Open wiring compartment
-
Punch knockouts for wiring conduit access
Wiring Diagram
With the power switched Off, connect the wires according to the wiring diagram
below.
Note: If you are connecting more than one wire to each terminal, it is
recommended to form a pigtail connection.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>