CHAUVET DJ ML6 ILS Command User Guide

: June 10, 2024
: Chauvet DJ

Table of Contents

CHAUVET DJ ML6 ILS Command
Product Information
Safety Notes
Product Usage Instructions
What is Included
Control Panel Overview
Control Panel Description
FCC STATMENT
RF Exposure Warning for North America and Australia
Contact Us
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CHAUVET DJ ML6 ILS Command

CHAUVET-DJ-ML6-ILS-Command-PRODUCT - Copy

Product Information

The ILS Command is a lighting control device that uses the 3-pin XLR connection and D-Fi for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending). The product comes with an external power supply, USB-C cable, carry bag, and a quick reference guide. The control panel features an encoder, button, faders, and various adjustment controls to manage the lighting effects.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance of the ILS Command.ely.

ALWAYS
Connect to a grounded circuit.
Connect to operating voltages as specified on the product’s spec sticker.
Disconnect from its power source during periods of inactivity.
Heed all restrictions and warnings on the spec sticker.
Mount in a location with at least 20 in (50 cm) of ventilation.

In the event of a serious operating problem, stop using immediately.

DO NOT:

Open this product or attempt any repairs. It contains no user-serviceable parts.
Use if the power cord is crimped or damaged.
Disconnect by pulling on the power cord.
Allow flammable materials close to the product when it is operating.
Connect to a dimmer or rheostat.
Carry the product by its power cord.
Operate in temperatures higher than 104°F (40°C).
Expose to environments that exceed the Ingress Protection (IP) rating.
Expose to rain or moisture.
Use outdoors.
Set this product on a flammable surface.

Product Usage Instructions

Follow the below instructions to use the ILS Command:

Connect the ILS Command to a grounded circuit and to operating voltages as specified on the product’s spec sticker.
Mount the device in a location with at least 20 in (50 cm) of ventilation.
During periods of inactivity, disconnect the device from its power source.
In case of a serious operating problem, stop using the device immediately.
To access the control panel, refer to the Quick Reference Guide and use the encoder, button, faders, and various adjustment controls to manage the lighting effects.
Use the ILS Command with the Integrated Lighting System (ILS) ecosystem (patent pending) by connecting it using the 3-pin XLR connection and D-Fi for wireless connection.

What is Included

ILS Command
External power supply
USB-C cable
Carry bag
Quick Reference Guide

ILS Connection
The ILS Command uses the 3-pin XLR connection and D-Fi for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending).

Control Panel Overview

CHAUVET-DJ-ML6-ILS-Command-FIG-1

Control Panel Description

CHAUVET-DJ-ML6-ILS-Command-FIG-2 CHAUVET-DJ-ML6
-ILS-Command-FIG-3

FCC STATMENT

This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Warning for North America and Australia

Warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.