NODON BPS-1-1-00 Surface Mounting Box User Guide

June 10, 2024
NODON

NODON BPS-1-1-00 Surface Mounting Box User Guide

INSTALACIÓN

Cut the power supply. 2Fix the Surface Mounting Box to the wall (use fixings – not
included – suitable for the bracket) – see figure 1. 3Connect the module according to its type with the cable
supplied – see figure 2. 4Clip the module into the Surface Mounting Box – see figure 3. 5Tighten the cable grommet – see figure 4. 6Refit the intermediate plate and screw it in place with the 4
screws provided – see figure 5. 7 Refit the waterproof cover – see figure 6. 8 Turn the power supply back ON.
find all the installation diagrams on the “Support” section on
nodon.fr/en/technical-support/

**cable supplied – information Strip the cable as follows:
Cable compatible with most uses.



USO Y EMPAREJAMIENTO

Consulte el manual del módulo utilizado.
Disponible en el sitio web nodon.fr/es/ soporte/

Read More About This Manual & Download PDF

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals