SAMSUNG LST7T 55 Inch Class Outdoor QLED Smart TV User Manual
- June 10, 2024
- Samsung
Table of Contents
- Before Reading This User Manual
- Warning! Important Safety Instructions
- Package Content
- TV Installation
- The Samsung Smart Remote
- Running the Initial Setup
- Connecting to a Network
- Connecting the HDBase-T
- Using the Outdoor Mode
- Using the Adaptive Picture
- Troubleshooting and Maintenance
- Specifications and Other Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
USER MANUAL
The Terrace
LST7T
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com
Model ………………………..
Serial No. ………………………
(Mexico only) If you have any questions, please call us at 8300-SAMSUNG
(726-7864) for assistance.
Before Reading This User Manual
This TV comes with this user manual and an embedded e-Manual.
Before reading this user manual, review the following:
| User Manual| Read this provided user manual to see information about product
safety, installation, accessories, initial configuration, and product
specifications.
---|---|---
| e-Manual| For more information about this TV, read the e-Manual embedded in
the product.
• To open the e-Manual,
Settings > Support > Open e-Manual
On the website (www.samsung.com), you can download
the manuals and see its contents on your PC or mobile device.
Learning the e-Manual’s assistance functions
- Some menu screens cannot be accessed from the e-Manual.
| Search| Select an item from the search results to load the corresponding
page.
---|---|---
| Index| Select a keyword to navigate to the relevant page.
| Sitemap| It displays the lists for each item in e-Manual.
| Recently Viewed Topics| Select a topic from the list of recently viewed
topics.
Learning the functions of the buttons that appear on e-Manual topic pages
| Try Now| Allows you to access the corresponding menu item and try out the
feature . right away.
---|---|---
| Link| Access an underlined topic referred to on an e-Manual page
immediately.
Warning! Important Safety Instructions
Please read the Safety Instructions before using your TV.
Refer to the table below for an explanation of symbols which may be on your
Samsung product.
CAUTION|
| Class II product: This symbol indicates that a safety connection to
electrical earth (ground) is not required. If this symbol is not present on a
product with a power cord, the product MUST have a reliable connection to
protective earth (ground).
AC voltage: Rated voltage marked with this symbol is AC voltage.
---|---|---
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED
PERSONNEL.
| This symbol indicates that high voltage is present inside. It is dangerous
to make any kind of contact with any internal part of this product| ****| DC
voltage: Rated voltage marked with this
symbol is DC voltage.
| This symbol indicates that this product has included important literature
concerning operation and maintenance.| | Caution. Consult instructions for
use: This symbol instructs the user to consult the user manual for further
safety related information.
-
Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
-
This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.
-
Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
-
Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
-
To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
-
Before plugging in the AC power cord of the TV, make sure that the operational voltage of the TV matches the voltage of your local electrical power supply. Refer to the power specifications section of the manual and/or the power supply label on the product for voltage and amperage information.
-
Never insert anything metallic into the open parts of this apparatus. This may cause electric shock.
-
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
-
Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord’s plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
-
If this apparatus does not operate normally – in particular, if there are any unusual sounds orsmells coming from it – unplug it immediately and contact an authorized dealer or Samsung service center.
-
Besure to pull the power plug out of the outlet if the TV is to remain unused orif you are going to leave the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).
— Accumulated dust can cause an electric shock, an electric leakage, ora fire by causing the power cord to generate sparks and heat or by causing the insulation to deteriorate. -
This TVis designed and intended for general consumer usage and should not be used for commercial applications including timetables, static display, digital signage, shop displays, and video wall displays.
-
Use only a properly grounded plug and wall outlet.
— Animproper ground may cause electric shock or equipment damage. (Class | Equipment only.) -
To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure that the wall outlet and power plug are readily accessible.
-
Store the accessories (batteries, etc.) in a location safely out of the reach of children.
-
Donot drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsunge service center.
-
To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, airfresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the printing on the product.
-
Do not dispose of batteries in a fire.
-
Donot short-circuit, disassemble, or overheat the batteries.
-
CAUTION: There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.
-
WARNING – TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.
Package Content
Make sure the following items are included with your TV. If any items are missing, contact your dealer.
-
Samsung Smart Remote & Batteries (AAA x 2) (Not available in some locations)
-
User Manual
-
Warranty Card / Regulatory Guide (Not available in some locations)
-
Power Cord
-
The items’ colors and shapes may vary depending on the models.
-
Cables not included can be purchased separately.
-
Check for any accessories hidden behind orin the packing materials when opening the box.
Using the Holder-Cable
The screen can be damaged from direct pressure when handled incorrectly. As shown in the figure, make sure to grip the edges of the screen when you lift the TV.
TV Installation
-
TVscreen must not be exposed to direct sunlight.
— Ifthe TVscreen is exposed to direct sunlight, it can develop dark areas. This is acommon symptom of LCD Panel and dark areas will disappear when the screen is taken out of direct sunlight.
— Continuous exposure to direct sunlight may cause damage to the TV screen. -
The brightness sensor, which is located at the bottom right side of the product, should not be covered by any object and totally exposed to outside.
— The TV will activate “Screen Protection Mode” if it senses too much brightness in the surrounding area. This will lower the screen’s brightness to protect the TV. -
For the stable use of the product, it should be installed in a place where there is no risk of freezing due to snow accumulation or exposure to rain for a long time.
-
It cannot be installed in a recessed space.
Planning the location
Media Bay
-
The Terrace provides space (Media Bay) to install Media Players where Weather-Resistant is guaranteed on the rear of the product.
-
The media player listed below can be installed on the rear space (Media Bay) of the product.
— Media player: Amazon Fire Stick, Google Chromecast, Roku Ultra Streaming M Player -
Make sure to close the cover and fasten the screws to ensure it is water tight. (Use the provided screws. Otherwise, it may cause problems such as improper Weather-Resistant.)
Media Bay
Dimensions (W x H x D)| 210.0 x 270.0 x 25.0 mm
---|---
Media player
Installation space (W x H x D)| 140.0 x 200.0 x 25.0 mm
Before connecting cables
-
Unfasten the screws, then open the cover.
-
Remove the appropriate silico to connectne bar for the thickness of the cable
Different hole sizes and corresponding cable thickness for each:Position| 1| 2| 3| 4| 5| 6| 7| 8| 9
---|---|---|---|---|---|---|---|---|---
Cable diameter
(Ø) mm)| Ø 7.0| Ø 4.0| Ø 3.0| Ø3.0| Ø 5.5| Ø1.6| Ø5.5| Ø7.0| Ø8.0 -
Insert the appropriate cable into the hole from which the silicone bar was removed.
-
Thecable should be connected as shown.
-
Close the cover, then fasten the screws.
— Afterall the cables are connected, make sure to close the cover and fasten the screws to ensure it is water tight. (Use the provided screws. Otherwise, it may cause problems such as improper Weather-Resistant.) Recommended torque : 10 – 12 kgf.cm
Mounting the TV on a wall
Because access to Media Bay of the TV may be limited due to the design
of the wall-mount that you use, connecting all cables and devices that you
need prior to hanging the TV on the wall is recommended. When connecting
additional cables and devices to the TV after hanging on the wall, you may
need to separate the
TV from wall-mount.
If you mount this TV on a wall, follow the instructions exactly as set
out by the manufacturer. If it is not correctly mounted, the TV may slide or
fall and cause serious injury to a child or adult and serious damage to the
TV.
- Refer to the installation manual included with the Samsung wall mount kit.
- You can mount the TV on the wall using a wall mount kit (sold separately).
- Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own.
- You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, contact your nearest dealer for additional information. If you install the TV ona ceiling or slanted wall, it may fall and result in severe personal injury.
- When installing a wall mount kit, we recommend you fasten all four VESA screws.
- If you want to install a wall mount kit that attaches to the wall using two top screws only, be sure to use a Samsung wall mount kit that supports this type of installation. (You may not be able to purchase this type of wall mount kit, depending on the geographical region.)
- Standard dimensions for wall mount kits are shown in the table on the next page.
- If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to the wall mount is shown in column C in the table on the next page.
Model Name| VESA screw n ole Specs
(A * B) in millimeters| C(mm) || StandardScrew| Quantity|
---|---|---|---|---|---
QN55LST/7T| 200 x 200| 11.8| M8|
QN65LST/T| 400 x 400
QN75LST/T
-
Recommended torque :10 – 12 kgf.cm
**** Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electricl \ shock. -
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.
-
Forwall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications. -
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
-
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used orwhen the consumer fails to follow the product installation instructions.
-
Always have two people mount the TV onto a wall.
-
WARNING: This apparatus must be securely attached to the wall.
“Tipping, shaking, or rocking the machine may cause injury/death.” (CSA60065)
Providing proper ventilation for your TV
When you install your TV, maintain a distance of at least 38 mm between the TV
and other objects (walls, cabinet sides, etc.) to ensure proper ventilation.
Failing to maintain proper ventilation may result in a fire or a problem with
the product caused by an increase in its internal temperature.
- When you install your TV with a wall mount, we strongly recommend you use parts provided by Samsung Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the product falling.
Durability
- The TV provides the robust durability by IP55 so that it can be used in outdoor environment (when installed and used as per the instructions in this User Manual).
- The remote control of this product provides durability by IP56.
Protection against solids | IP | Protection against water |
---|---|---|
5 | 5 | |
No protection | 0 | 0 |
Solids > 50 mm | 1 | 1 |
Solids >12 mm | 2 | 2 |
Solids > 2.5 mm | 3 | 3 |
Solids >1.0 mnn | 4 | 4 |
Dust Protected | 5 | 5 |
Dust tight | 6 | 6 |
– | 7 | |
– | 8 |
Despite the IP55 and IP56 ratings, your TV and remote control are not impervious to water damage in any situation. To help prevent damage to your products, avoid the products being subjected to:
- Water projected by a source greater than 6.3 mm against enclosure from any direction or submersion in water.
- Water projected at greater than 30 KPa (4.4 PSI) with a water volume greater than 12.5 liters/minute for more than 3 minutes and extreme weather conditions.
If you have purchased or been provided a Dust Cover in the box with the TV, be
sure to apply the Dust Cover to the TV whenever the TV is not in use for an
extended period of time.
The Dust Cover will help prevent dust, dirt, and more from accumulating on the
TV. Please refer to the guide provided with the Dust Cover for
installation/usage guidelines.
The Samsung Smart Remote
About the Buttons on the Samsung Smart Remote
- The images, buttons, and functions of the Samsung Smart Remote may differ depending on the model.
- The Universal Remote function operates normally only when you use the Samsung Smart Remote that comes with the TV.
Pairing the TV to the Samsung Smart Remote
When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV automatically. If the Samsung Smart Remote does not pair to the TV automatically, point it at the remote control sensor of the TV, and then press and hold the buttons labeled and as shown in the figure on the left simultaneously for 3 seconds or more.
Installing batteries into the Samsung Smart Remote
- Press the button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the body cover.
- Turn the remote over, push the body of the remote upwards until the battery compartment is revealed, and then remove the battery cover.
- If there are batteries in the remote, to remove the existing batteries.
- Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the batteries’ polarities (+, -) are oriented correctly.
- Once the batteries have been inserted, attach the battery cover and then slide down the body of the remote.
- Turn the remote over, press and hold the button on the top rear, and then slide the body of the remote down into place.
• Alkaline batteries are recommended for longer battery life.
Running the Initial Setup
When you turn onyour TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you to configure the basic settings forthe TV to operate, such as broadcast reception, channel search, and network connection, at one time.
- Before starting the Initial Setup, be sure to connect external devices first.
- To use the TV’s smart features, the TV must be connected to the Internet.
- To perform the Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
- If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device, manually add the TV using Add Device on the dashboard of the SmartThings app, and then continue with the set up process.
- The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
- Noise may occur temporarily when the TV communicates with mobile devices.
You can also start the Initial Setup using the TV’s menu Settings > General > Reset). Follow the instructions displayed on the Initial Setup screen and configure the TV’s basic settings to suit your viewing environment.
Using the TV Controller
You can turn on the TV with the TV Controller button at the bottom of the TV,
and then use the Control menu. The Control menu appears when the TV Controller
button is pressed while the TV is On. For more information about its usage,
refer to the figure below.
Connecting to a Network
Connecting the TV to a network gives you access to online services, such as
Smart Hub, as well as software updates.
Network Connection – Wireless
Connect the TV to the Internet using a wireless access point or modem.
Network Connection – Wired
Connect your TV to the network using a LAN cable.
- The TV will not be able to connect to the Internet if your network speed is below10 Mbps.
- To connect a LAN cable, use a CAT 7 (*STP type) cable for the connection. (100/10 Mbps)
- Shielded Twisted Pair
Connecting the HDBase-T
HDBase-T connection of The Terrace is built-in for transmission of audio and video data. It does not support transmission of power, Ethernet and control signals including IR and RS232.
General
- The appearance may differ depending on the product.
- Connecting parts may differ in different products.
- Data transmission is not available if HDBase-T (Rx) is connected to HDBase-T (Tx) through a hub.
- While installing the product, be sure to use the cables and TX devices certified by the HDBase-T Alliance.
- When connecting an external device via HDBase-T, forthe maximum resolution, use a certified TX device that supports 4K 30 Hz.
- This port (HDBT port on the TV) does not support ARC (eARC).
Guidelines for connection
- HDBase-T (Tx) transmits data from an external device to HDBase-T (Rx). Only1:1 connection is available between devices. Make sure to connect them via a LAN (CAT6 or higher quality) cable.
- HDBase-T works with unshielded twisted pair (UTP) or shielded twisted pair (STP) cables; but, to ensure CE compliance, STP cables and STP Connectors are required. STP cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance. It is recommended to use an STP cable to maximize performance. Using a UTP cable or patch may decrease performance.
- Before replacing the external device, first remove the HDBT LAN (CAT6 or higher quality) cable.
Constraints
- When connecting an external device via HDBase-T, there may be restrictions during communication between devices.
- When connection a gaming device via HDBase-T, the related functions and screen resolution may not be supported smoothly.
Using the Outdoor Mode
Settings > General > System Manager > Outdoor Mode Outdoor TV provides an optimal viewing experience under 0°C (32°F) to 50°C (122°F).
-
In low temperature below10°C (50°F), motion blur may occur due to liquid crystal characteristics.
-
To view the TV under low temperature below 10°C (50°F), you can use the Outdoor Mode for stable startup.
-
Outdoor Mode keeps the startup stable by operating the TV backlight when the weather is very cold.
-
When Outdoor Mode is active, be sure to keep the power supply connected.
-
Even in standby mode for Outdoor Mode, power may be consumed as follows:
— 55”°:MAX 250 W// 65″: MAX 300 W/ 75″: MAX 400 W -
Outdoor Mode operates in standby and the screen may appear gray.
Temperature protection
- Atthe temperature above 45°C (113°F), the luminance may be lowered to protect the product. This option works regardless of Outdoor Mode activation.
Using the Adaptive Picture
Settings > General > Intelligent Mode Settings > Adaptive Picture
Optimizes brightness and provides the best picture quality in real time, based
on the lighting condition and the content you’re viewing.
- The Adaptive Picture in The Terrace automatically optimizes Brightness and Contrast in real time, making the content you are currently watching the best quality even in bright or dark conditions.
Troubleshooting and Maintenance
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems
and solutions. Alternatively, review the Troubleshooting or FAQ Section in the
e-Manual. If none of the troubleshooting tips apply, please visit
“www.samsung.com” and click Support or contact the
Samsung service center listed on the back cover of this manual.
- This TFTLED panel is made up of sub pixels which require sophisticated technology to produce. There may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
- To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto Update functions on the TV’s menu Settings > Support > Software Update > Update Now or Auto Update).
The TV won’t turn on.
- Make sure that the AC power cord is securely plugged in to the TV and the wall outlet.
- Make sure that the wall outlet is working and the power indicator at the bottom of the TV is lit and glowing a solid red.
- Try pressing the TV Controller button at the bottom of the TV to make sure that the problem is not with the remote control. If the TV turns on, refer to “The remote control does not work.”
There is no picture/video/sound, or a distorted picture/video/sound from an external device, or “Weak or No Signal” is displayed on the TV, oryou cannot find a channel.
- Performa TV self diagnosis to determine if the problem is caused by the TV or the device Settings > Support > Device Care > Self Diagnosis > Picture Test or Sound Test).
- If the test results are normal, make sure the connection to the device is correct and that all cables are fully inserted.
- Remove and reconnect all cables connected to the TV and the external devices. Try new cables if possible and confirm that the correct input source has been selected Source).
- Reboot the connected devices by unplugging each device’s power cord and then plugging it in again. If the issue persists, refer to the connection guide in the user manual of the connected device.
- If you are not using a cable box or satellite box, and your TV is receiving TV signals from an antenna or a cable wall connector, run Auto Program or Auto Tuning to search for channels Settings > Broadcasting > Auto Program or Auto Tuning).
— If you are using a cable box or satellite box, please refer to the cable box or satellite box manual.
The remote control does not work.
- Check if the power indicator at the bottom of the TV blinks when you press the remote’s Power button. If it does not, replace the remote control’s batteries.
- Make sure that the batteries are installed with their poles (+/—) in the correct direction.
- Try pointing the remote directly at the TV from 1.5-1.8 m (150-180 cm) away.
- If your TV came with a Samsung Smart Remote (Bluetooth Remote), make sure to pair the remote to the TV.
The cable box or satellite box remote control doesn’t turn the TV on or off or adjust the volume.
- Program the cable box or satellite box remote control to operate the TV. Refer to the cable box or satellite box user manual for the SAMSUNG TV code.
The TV settings are lost after 5 minutes.
- The TV is in the Retail Mode. Change the Usage Mode in the System Manager Menu to Home Mode Settings > General > System Manager > Usage Mode > Home Mode).
Intermittent Wi-Fi
- Make sure the TV has a network connection Settings > General > Network > Network Status).
- Make sure the Wi-Fi password is entered correctly.
- Check the distance between the TV and the modem or access point. The distance should not exceed 15.2 m.
- Reduce interference by not using or turning off wireless devices. Also, verify that there are no obstacles between the TV and the modem or access point. (The Wi-Fi strength can be decreased by appliances, cordless phones, stone walls/fireplaces, etc.)
- Contact your Internet Service Provider (ISP) and ask them to reset your network circuit to re-register the MAC
addresses of your new modem or access point and the TV.
Video Apps problems (Youtube etc)
- Change the DNS to 8.8.8.8. Select Settings > General >» Network > Network Status > IP Settings > DNS Setting > Enter manually > DNS Server > enter 8.8.8.8 > OK.
- Reset by selecting Settings > Support > Device Care > Self Diagnosis > Reset Smart Hub.
What is Remote Support?
Samsung Remote Support service offers you one-on-one support with a Samsung
Technician who can remotely:
- Diagnose your TV
- Adjust the TV settings for you
- Performa factory reset on your TV
- Install recommended firmware updates
How does Remote Support work?
You can easily get Samsung Remote Support service for your TV.
- Call the Samsung service center and ask for remote support.
- Open the menu on your TV, and then go to the Support menu. Settings > Support)
- Select Remote Management, then read and agree to the service agreements. When the PIN screen appears, provide the PIN number to the technician.
- The technician will then access your TV.
Eco Sensor and screen brightness
Eco Sensor adjusts the brightness of the TV automatically. This feature measures the light and optimizes the brightness of the TV automatically to reduce power consumption. If you want to turn this off, go to Settings > General > Eco Solution > Ambient Light Detection.
- If the screen is too dark while you are watching TV in a dark environment, it may be due to the Ambient Light Detection function.
- The eco sensor is located at the bottom of the TV. Do not block the sensor with any object. This can decrease picture brightness.
Caring for the TV
- If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the debris off before watching TV.
- The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches.
- To clean the screen, turn off the TV, then gently wipe away smudges and fingerprints on the panel with a micro- fiber cloth. Clean the body or panel of the TV with a micro-fiber cloth dampened with a small amount of water. After that, remove the moisture with a dry cloth. While cleaning, do not apply strong force to the surface of the panel because it can damage the panel. Never use flammable liquids (benzene, thinner, etc.) ora cleaning agent. For stubborn smudges, spray a small amount of screen cleaner on a micro-fiber cloth, and then use the cloth to wipe away the smudges.
- Chemical detergents may cause problems on the surface of the product.
Specifications and Other Information
Specifications
Model Name | QN55LST7T | QN65LST7T |
---|---|---|
Display Resolution | 3840 x 2160 | 3840 x 2160 |
Screen Size
Diagonal
Measured Diagonally| 55″ Class
54.6 measured diagonally| 65″ Class
64.5 measured diagonally
Screen Size
- Only Colombia (cm)
Measured Diagonally| 138 cm| 163 cm
Sound (Output)| 20 W| 20 W
Dimensions (W x H x D) Body
Package| 1247.4 x7209 x 59.8 mm
1404.0 x 846.0 x 208.0 mm| 1466.3 x 851.1 x 59.8 mm
1710.0 x 1035.0 x 215.0 mm
Dimensions (W x H x D) * Only Colombia (cm) Body
Package| 124.74 x 72.09 x 5.98 cm
140.40 x 84.60 x 20.80 cm| 146.63 x 85.11 x 5.98 cm
171.00 x103.50 x 21.50 cm
Weight
Without Stand Package| 29.3 kg
37.2 kg| 38.9 kg
49.6 kg
Power Requirements (Mexico Only)| 110-127V – 50/60Hz| 110-127V – 50/60Hz
Power Consumption (Mexico Only)| 345 W| 410 W
Model Name| QN75LST7T
---|---
Display Resolution| 3840 x 2160
Screen Size
Diagonal
Measured Diagonally| 75″ Class
74.5 measured diagonally
Screen Size - Only Colombia (cm)
Measured Diagonally| 189 cm
Sound (Output)| 20 W
Dimensions (W x H x D) Body
Package| 1692.0 x 981.6 x 59.8 mm
1859.0 x1141.0 x 215.0 mm
Dimensions (W x H x D) * Only Colombia (cm) Body
Package| 169.20 x 98.16 x 5.98 cm
18590 x 114.10 x 21.50 cm
Weight
Without Stand Package| 50.3 kg
63.4 kg
Power Requirements (Mexico Only)| 110-127V- 50/60Hz
Power Consumption (Mexico Only)| 550 W
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity| -22°F to122°F (-30°C to 50°C)
10% to 80%, non-condensing
-4°F to 122°F (-20°C to 50°C)
5% to 95%, non-condensing
---|---
Notes
- Design and specifications are subject to change without prior notice.
- For information about the power supply, and more information about power consumption, refer to the label-rating attached to the product.
- You can see the label-rating attached to the back of the TV. (For some models, you can see the label-rating inside the cover terminal.)
Decreasing power consumption
When you shut the TV off, it enters Standby mode. In Standby mode, it
continues to draw a small amount of power. To decrease power consumption,
unplug the power cord when you don’t intend to use the TV for a long time.
Licenses
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the Samsung service center.
Contacte con SAMSUNG WORLD WIDE
Country
MEXICO| Samsung Service Center V 800-SAMSUNG| Web Site
www.samsung.com/mx/support
---|---|---
ARGENTINA| 0800-555-SAMS(7267)|
www.samsung.com/ar
URUGUAY| 0800-SAMS(7267)| www.samsung.com/uy
PARAGUAY| 0800-11-SAMS(7267)| www.samsung.com/py
BRAZIL| 0800 555 0000 (Demais cidades e regioes) 4004-0000 (Capitals e grandes
centros)| www.samsung.com/br/support
CHILE| 800726786|
www.samsung.com/cl/support
BOLIVIA| 800107260|
www.samsung.com/cl/support
COLOMBIA| Bogota en et 600 12 72 Sin costo en todo el pais 01 8000 112 112 Y
desde to celular #726|
www.samsung.com/co/support
COSTA RICA| 00-80 0-1-SAMSUNG (726-7864)|
www.samsung.comaatin/support (Spanish)
www.samsung.com/latin_en/support
(English)
DOMINICAN REPUBLIC| 1-800-751-2676|
www.samsung.com/latin/support
(Spanish)
www.samsung.com/latin_en/support
(English)
ECUADOR| 1-800-SAMSUN (72-6786)|
www.samsung.com/latin/support
(Spanish)
www.samsung.comaatin_en/support
(English)
EL SALVADOR| 8000-SAMSUNG (726-7864)|
www.samsung.comaatin/support (Spanish)
www.samsung.comfiatin_en/support
(English)
GUATEMALA| 1-800-299-0033|
www.samsung.comaatin/support (Spanish)
www.samsung.comnatin_en/support
(English)
HONDURAS| 800-2791-9111|
www.samsung.comnatin/support (Spanish)
www.samsung.com/latin_en/support
(English)
JAMAICA| 1-800-SAMSUNG (726-7864)|
www.samsung.com/latin_en/support
(English)
NICARAGUA| 001-800-5077267|
www.samsung.com/latin/support
(Spanish)
www.samsung.com/latin_en/support
(English)
PANAMA| 800-0101|
www.samsung.com/latin/support
(Spanish)
www.samsung.com/latin_en/support
(English)
PERU| 080077708 Desde telefonos fijos, piiblicos o celulares|
www.samsung.com/pe/support
PUERTO RICO| 1-800-682-3180|
www.samsung.com/latin/support
(Spanish)
www.samsung.com/latin_en/support
(English)
TRINIDAD & TOBAGO| 1-800-SAMSUNG (726-7864)|
www.samsung.com/latin/support
(Spanish)
www.samsung.com/latin_en/support
(English)
VENEZUELA| 0-800-100-5303|
www.samsung.com/Latin/support
(Spanish)
www.samsung.com/latin_en/support
(English)
(solo México)
IMPORTADO POR : SAMSUNG ELECTRONICS MEXICO S.A. DE CV.
General Mariano Escobedo 476, Piso 8 Col. Anzures,
Alcaldia Miguel Hidalgo, Ciudad de México CP. 11590
TEL: (55) 5747-5100 / 800 726 7864
© 2020 Samsung Electronics Co., Ltd. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>