BLAUPUNKT BT15 CLOCK Portable Bluetooth Speaker Owner’s Manual

: June 10, 2024
: Blaupunkt

Table of Contents

BLAUPUNKT BT15 CLOCK Portable Bluetooth Speaker
Product Information
Product Usage Instructions
IMPORTANT NOTES
SAFETY INSTRUCTIONS
Environmental information
Location of controls
Specification
Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLAUPUNKT BT15 CLOCK Portable Bluetooth Speaker

Product Information

The product is a handheld vacuum cleaner designed for quick and easy cleaning of small areas. It has a rechargeable battery and comes with a crevice tool and a brush attachment. The vacuum has a bagless design and a washable filter.

Product Usage Instructions

Before using the vacuum, ensure that it is fully charged.
Select the appropriate attachment for the cleaning task – crevice tool for tight spaces and brush attachment for upholstery or carpets.
Press the power button to turn on the vacuum.
Hold the vacuum over the area to be cleaned and move it back and forth in a slow, steady motion.
Once finished, turn off the vacuum and empty the dustbin. Wash the filter under running water and allow it to dry completely before replacing it.
Store the vacuum in a dry, cool place.

IMPORTANT NOTES

To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble-free performance and listening pleasure.

This safety and operating instruction should be retained for future reference.
The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
Do not install the product in the following areas:
Places exposed to direct sunlight or close to radiators.
On top of other stereo equipment that radiates too much heat.
Blocking ventilation or in a dusty area.
Areas where there is constant vibration.
Humid or moist places.
Do not place near candles or other naked flames.
Operate the product only as instructed in this manual.
Before turning on the power for the first time, make sure the power adaptor is properly connected.
Plug-in the USB stick directly or use an USB extension cable which is not longer than 25 cm.

For safety reasons, do not remove any covers or attempt to gain access to
the inside of the product. Refer any servicing to qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit; there
are no user serviceable parts inside. Refer all servicing to qualified service
personnel.

SAFETY INSTRUCTIONS

Read Instructions: All the safety and operating instructions must be read before the product is operated.
Retain Instructions: The safety and operating instructions should be kept with the product for future reference.
Heed warnings: All warnings on the product and in the operating instructions should be adhered to.
Follow instructions: All operating and users instructions should be followed.
Water and moisture: To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
Object and Liquid Entry: Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
Servicing: Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Replacement parts: When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or moisture.
Protect your furniture when placing your units on natural wood and lacquered finish by using a cloth or protective material between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such as Benzine, thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before cleaning.
Battery
The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
The batteries should be drawn to the environmental aspects of battery disposal.

WARNING
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus.
To prevent fire or shock hazards, do not expose this equipment to hot places, rain, moisture, or dust.
Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines, or swimming pools. Ensure that you place the unit on a dry, stable surface.
Do not place this unit close to a strong magnetic field.
Do not place the unit on an amplifier or receiver.
Do not place this unit in a damp area as the moisture will affect the life of the electric components.
If the clock is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry, or slightly damp cloth.

This product complies with the radio interference requirements of the European community. Your products is designed an manufactured with high-quality materials and components, which can be recycled and reused. When this crossed- out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please cat according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer), and polyethylene (bags, protective foam sheet). Your system consists of material that can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries, and old equipment. Recording and playback of material might require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Many thanks to buy our product. This model is a mini Bluetooth speaker with below main
features.

Bluetooth function for audio streaming playback.
PLL FM radio with station memory.
MicroSD card playback.
Clock time with alarm function.
Aux in
Built-in rechargeable battery.
Big LCD display.
Hi-Fi sound quality.

Location of controls

Front panel

Rear panel

TF or MicroSD card slot.
AUX in iack.
DC 5V Micro USB power jack.

Top panel

M: Power on/off and play source button
Press and hold 3 seconds to power on or off the unit. Short press it to switch the play source between Bluetooth/FM/MicroSD/AUX in.
-: Volume down and previous button
Press and hold it to decrease the volume. In Bluetooth and microSD card playback mode, short press to select last track. In FM radio mode, short press it to pick up the last preset radio station. In time/alarm setting mode, short press it to adjust time; press and hold to select the settina in high speed
M: Play/ pause button
In Bluetooth playback mode, short-press it to play or pause the music. When a phone call is incoming, short-press it to pick up the phone; press it again to end the call and resume the music playback. In FM radio, press and hold 3 seconds to auto scan and preset the available station. Short press it to mute the sound output. In microSD card playback mode, short-press it to play or pause the music.
+: Volume up and next button
Press and hold it to increase the volume. In Bluetooth and microSD card playback mode, short press to select the next track. In FM radio mode, short press it to pick up the next preset radio station. In time/alarm setting mode, short press it to adjust time; press and hold to select the setting in high speed.
%: Bluetooth button
Short-press it to enter Bluetooth playback. Press and hold for 3 seconds to turn on or off the alarm.
@: Time and alarm button
Short-press it to enter the clock time interface, and press it again to check the alarm time. In the clock or alarm time interface, press and hold 3 seconds to start the time and alarm setting.
LED indication icon.
****Power on/off and charging indicator.
The icon will light up in TF/MicroSD card playback mode.
The icon will light up in FM radio mode.
The icon will light up in AUX in playback mode.
The icon will light up in Bluetooth mode.
: The icon will up when the alarm is working and on.

Battery charging
This unit had a built-in rechargeable lithium battery inside. Before start the playing, please
follow up below step for charging.

Using the supplied USB to micro USB type charging cable connects the speaker with your USB charger (USB adaptor or USB output port like on PC, USB rating output: 5V/1A, other USB charger with current equal or above 1A). The micro USB connector should connect with the DC 5V power jack on the rear panel of speaker, and the another terminal connect with USB charger. Then plug your USB charger on household AC power.
The battery icon will light up and flare during charging, and the icon will become stable when the battery is fully charged. Important: We recommend connect the USB charger with rating output spec at DC 5V/1A, or equal or above 1A output current USB power. The general USB output on PC (personalcomputer) is 5V/1A (please reference your PC spec for checking). There may have some charging noise or abnormal function from speaker if the charging current is too low. If it happened, please remove the charging power and put the speaker in a while, then the speaker will reset the function in normal. Please kindly note this is not a malfunction.

Notes:
Your battery will last longer if you follow up below simple guidelines for charging and storing.

For charging first time, charge it at least 10 hours.
Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
Do notcharge (longer than 24 hours). Excessive charging or discharging may shorten the battery’s life.
Battery life naturally shortens slowly over time.
Please turn off the speaker if long time not to use.
The speaker can play music during charging.
Due to prolong charging and discharging, the unit battery life will be affected and playback time will also be shortened. We cannot guarantee the same playback consistently throughout and this is not included in our warranty and service.

Power on/off
Press and hold the ” M” button in 3 seconds to power on or power off the speaker. Short press the button can switch the play mode between Bluetooth/radio/microSD card/AUX IN
Clock time and alarm
The speaker includes 24 hours format clock time and one alarm, which is able to wake up you in the morning.

Notes:

The alarm sound will last 1 minutes and auto off in case of you do not press the button to cancel the sound.
Only the bell sound is available to select as the alarm source.
Please make sure the speaker connect with USB power, or have battery power inside. The alarm cannot work if the battery power is off or too low.
When you set up the alarm ready, and power off the speaker. The alarm still can wake up you when the time is being.

Bluetooth operation
The speaker includes Bluetooth function which allows you to wireless playback the audio with other Bluetooth device like smart phone etc. Please follow up below for the operation.

Power on the unit and short press the ” M” button till the ” BLUE” show on display; meanwhile, the LED will flare on the top panel which means the speaker is ready for pairing.
Enable the Bluetooth function on your Bluetooth device, and search the available Bluetooth device( please reference your device manual for the operation).
Check the available Bluetooth device on the menu list of your device, and select ” BP BT15″ in order to start pairing. Please key in “0000” (4 zero) in case of a POP password required during pairing. The LED will become stable when the pairing is successful.
Select and play the music on your Bluetooth device. Then the sound will output from the speaker.
During Bluetooth playback, you can short-press the button to play or pause the music; short press the + or – button to select next or last track; press and hold + or – button to increase or decrease the volume.
Phone call hands-free: when the cell phone was paired with the speaker in Bluetooth mode, and an incoming call is arriving; short press of the button can pick up the call; answer the phone by close to the front of speak within 30 cm(suggested) because the microphone was built in on the rear side of speaker grill; short press the button again can end the phone call and resume the music playback.

Notes:

All Bluetooth devices are not guaranteed to pair successfully due to different design and brand.
Please do not put your cell phone very close to the speaker during phone call hands free conversation, in order to avoid interference which will impact the conversation sound quality.
The Bluetooth best working distance is within 10 meters without any obstacle in between.

FM radio operation
Before listen to the radio, please try to move the unit next to the window as you can, and insert the supplied 3.5mm to 3.5mm stereo audio cable into the AUX IN jack as an external antenna in order to get better reception.

Power on the unit, and short press the ” M” button repeatedly till” dO” shows on display.
Press and hold the button to auto scan and save the available FM station ( max supported 50 preset station); short press the + or – to select the next or last preset station;press and hold the + or – button to increase or decrease the volume; short press the button can mute or resume the FM radio sound

TF/MicroSD card playback
Please copy the MP3 format music into the TF or MicroSD card device (max supported 128GB) before start the playing, and then insert the card into the slot on the rear panel of unit. Please kindly note the TF/MicroSD card playback mode is only available when there have carddevice installed on the speaker successfully. Power on the unit, and short press ” M” till” CARD” shows on display; the speaker will read out the card device automatically, and get the music output after few seconds.In TF/MicroSD card playback mode, short press the + or – button can select next or last track; press and hold the + or – button can increase or decrease the volume; short press the button to navor nause the music

Notes:

The supported audio format is MP3/WMA/WAV/FLAC(24bit/192kHz/SDHC/SDXCin TF/MicroSD playback mode.
Not all TF/MicroSD card devices are supported due to different design and brand, the max supported storage is 128GB.
Please kindly insert the TF or MicroSD card into the slot properly.

AUXIN/MP3 link mode
Using the supplied 3.5mm to 3.5mm stereo audio cable connect the AUX jack on the speaker rear panel with the line out or headphone jack on any other external audio player like mp3 player etc. Power on the speaker and short press the ” M” button till the ” AUX” shows on display. Select and play the music from your external audio player, then the sound will output from the speaker.

Notes:

In AUX IN mode, the main control is on your external audio player side. But you still can increase or decrease the volume, and mute the sound on the speaker part.
In Bluetooth mode, the speaker will switch to AUX in mode automatically when you plug in the audio cable.
Please kindly note the AUX in mode is only available when the audio cable was plugged In

Specification

Power source: DC5V, 1A; (or DC 5V, rating current above 1A) Bluetooth version: 2.1+ EDR, best working distance within 10 meters
FM Frequency: 87.5~108.00MHz TF/MicroSD card support 128GB max, support audio format MP3/WMA/WAV/FLAC(24bit/192kHz)/ SDHC/SDXC.Frequency
Response: 20Hz- 20kHz Rated power: 5Wx 2
Battery power: 3.7V 4000mAH rechargeable lithium battery charging time: approximately 4 hours base on DC5V, 1A input. Music
playback time: 5.5 hours. Power
consumption: 10 WattStandby
power consumption: < 1 Watt Accessory:1 pcs x USB charging cable, 1 pcs x 3.5mm to 3.5mm stereo audio cable (The above spec may revise without prior notice)

Troubleshooting

The unit cannot power on.
- Please charge the unit and try again.
- Please contact the service center in case of issue remains.
There is no or intermittent sound output in Bluetooth mode.
- Please turn off the Bluetooth, and repair with the speaker.
- Please put your Bluetooth device closer with the speaker.
No available FM station or background noise in FM.
- Please plug on the 3.5mm stereo audio cable and re-scan the available FM station.
- Please tune to another FM station for listening.
  C.Please try to move the unit next to the window in order to get better reception.
The speaker cannot read out the music in TF or microSD card.
- Please check if you insert the TF or microSD card into the slot properly.
- Please check if the audio format is in MP3/WMA/WAV/FLAC.