BenQ QS02 HDMI Media Streaming Dongle User Guide

: June 10, 2024
: BenQ

Table of Contents

Package contents
Overview
Regulatory Statements
CE DOC
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide
HDMI Media Streaming | QS02

Package contents

BenQ QS02 HDMI Media Streaming Dongle - Package
contents

Overview

BenQ QS02 HDMI Media Streaming Dongle - Overview

BenQ QS02 HDMI Media Streaming Dongle - Overview 2 |
---|---

BenQ QS02 HDMI Media Streaming Dongle - Overview 4 Support.BenQ.com

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BenQ Corporation is under license. Google, YouTube and Android TV are trademarks of Google LLC.

Regulatory Statements

Safety notice for Remote Control and Battery

Do not put the remote control in the direct heat, humidity & Avoid fire.
Do not drop the remote control.
Do not expose the remote control to water or moisture, this could result in malfunction.
Confirm there is no object between the remote control and the remote sensor of the product.
When the remote control will not be used for an extended period, remove the batteries.

The use of the wrong type of batteries may cause chemical leaks or explosion. Please note the following:

Always ensure that the batteries are inserted with the positive and negative terminals in the correct direction as shown in the battery compartment.
Different types of batteries have different characteristics. Do not mix different types.
Do not mix old and new batteries. Mixing old and new batteries will shorten battery life or cause chemical leaks from the old batteries.
When batteries fail to function, replace them immediately.
Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps out of the batteries, wipe it up immediately using a dry cloth, and replace the batteries as soon as possible.
Due to varying storage conditions, the battery life for the batteries included with your product may be shortened. Replace them within 3 months or as soon as you can after initial use.
There may be local restrictions on the disposal or recycling of batteries. Consult your local regulations or waste disposal provider.

CE DOC

DECLARATION OF CONFORMITY
The device complies with the requirements set out in the Council Directives relevant Union harmonisation legislation:
RED Directive (2014/53/EU)
RoHS Directive 2011/65/EU & (EU) 2015/863
Turkish EEE Directive
UKCA Declaration of Conformity
The object of the declaration described above is in conformity with the relevant UK harmonisation legislation:

Radio Equipment Regulations 2017
The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

For EU
Hereby, BenQ Corporation, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the following internet address: https://www.benq.eu/en-eu/index.html
Hardware Version: V2, Software Version: 11.1.7
For QS02

Frequency band: 2402MHz – 2480MHz
2412MHz – 2472MHz
5150MHz – 5250MHz, 5250MHz – 5350MHz, 5470MHz – 5725MHz, 5725MHz – 5850MHz
RF Effective Isotropic Radiated Power, EIRP
2.4G: EIRP<20dbm
Bluetooth: EIRP<20dbm
5G:
Band 1: EIRP<23dbm
Band2: EIRP<20dbm
Band3: EIRP<20dbm
Band4: EIRP<14dbm

For Remote Control

Frequency band: 2402MHz – 2480MHz
RF Effective Isotropic Radiated Power, EIRP <20dbm

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

| AT| BE| BG| CH| CY| CZ| DK| DE| EE| EL| ES| Fl
---|---|---|---|---|---|---|---|---|---|---|---|---
FR| HR| HU| IE| IS| IT| LI| LT| LU| LV| MT| NL
NO| PL| PT| RO| SE| SI| SK| TR| UK(NI)|
| UK
---|---

EU REACH SVHC Disclosure on Candidate List
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC 1907/2006) is the European Union’s (EU) chemical substances regulatory framework. REACH requires BenQ Corporation to provide customers with sufficient information on Substances of Very High Concern (SVHC) contained in products in concentration above 0.1% weight by weight (w/w) to allow safe use of the product.
RoHS Statement
This product is compliant to implemented RoHS (Restriction of Hazardous Substances) type regulations worldwide, including but not limited to China, India, Japan, Korea and European Union.
EU RoHS

Coarse Classification	Chemical Substance Table
Pb	Hg
PCBA	O
Plastic parts	O
Metal parts	O
Packaging Materials	O

*: PCBA consisted of bare printed circuit board, soldering and its surface-mounted elements, such as resistors, capacitors, arrays, connectors, chips, etc.
NOTE 1: The “O” indicates that the percentage content of the substance to be calculated is not exceeding the reference percentage content of EU RoHS directive (2011/65/EU & EU 2015/863).
NOTE 2: The “exempted” item means that the specified chemical substance corresponds to the items exempted by the EU RoHS directive (2011/65/EU & EU 2015/863).

India RoHS
Restriction on Hazardous Substances statement (India)
This product complies with the “India” E-waste Rule 2016″ and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or PolyBrominated Diphenyl Ethers in concentrations exceeding 0.1 weight% and 0.01 weight for cadmium except for exemptions set in Schedule 2 of the Rule.

SAR information for radio equipment in France
2020-03-18 Guide Réglementation DAS Vf Decree 2019-1186 of 15 November 2019 relating to the display of the specific absorption rate of radioelectric equipment.
The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 20cm.

WEEE
WEEE directive
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union.
This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more information about recycling of this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment.
Recycling information: See https://www.benq.com/en-us/support/recycling /global-recycle.html for details.

FCC statement (for the United States only)
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Non-modification Statement: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
The distance between user and products should be no less than 20cm.
FCC SDoC: Visit www.benq.com/en-us > Support > Download & FAQ > the purchased model > the User Manual tab to access the SDoC (Supplier’s Declaration of Conformity) document. You may not find your product’s SDoC document online as it was not required at the time the product was manufactured. However, it does not change the fact that the product has been tested to comply with FCC standards, as indicated by the FCC logo on the product or on the label.

IC statement (for Canadian users)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with RSS 247 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations.
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.
CAN ICES-003(B)/NMB-003(B)

RF Exposure Information
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with 20cm between the radiator & your body.
This device complies with CAN ICES-003(B)/NMB-003(B). This Class B device meets all the requirements of the Canadian interference-causing equipment regulations.

E-Waste Declaration for India
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about E-waste please visit https://www.benq.com/en-us/support/recycling/global-recycle.html and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.
Helpline number:
M/s 3R Recycler
Plot No. 266 & 392
Sector- 8 , IMT Manesar
Gurgaon ( Haryana ) -122050
North India – 1800-102-8632
South India – 1800-843-3303
East India – 1800-843-3301
West India – 1800-843-3302
Email – info@3rrecycler.com

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc. in the United States and other countries.
For Remote Controller:
Manufacturer: Ohsung Electronics Co., Ltd.
Address 1: #181, Gongdan-DongGumi, Gyeongbuk 730-030 Republic of Korea
Address 2: 335-4, SANHODAERO, GUMI,39269 Korea (Republic Of)
Dolby, Dolby Audio, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright 2012-2022 Dolby Laboratories. All rights reserved.
Complies with IMDA Standards DB101054