Beautiful 19285 Personal Blender 12 Piece Set Instruction Manual

Beautiful 19285 Personal Blender 12 Piece Set

Product Information Personal Blender 12-Piece Set

The Personal Blender 12-Piece Set is a collection of easy-to-use kitchenware that is designed to simplify your cooking and baking experience. This blender set is a part of the Beautiful collection by the manufacturer. The blender set comes with a motor base, cups, blades, and other accessories that are essential for blending, grinding, and chopping.

Safety Instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions carefully before using the product.
2. To protect against the risk of electrical shock, do not put cord, plugs, or the appliance in water or any other liquid.
3. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Unplug the appliance when not in use and before assembling or disassembling it.
6. Do not operate the blender with a damaged cord or plug or after the appliance has malfunctioned or been dropped or damaged in any way.
7. The use of attachments, including canning jars, cups, or covers not recommended or sold by the manufacturer may cause injury to persons.
8. The blender is not intended for use in the microwave. Do not place the Cups, Motor Base, or accessories in the microwave as this may result in damage to the appliance.
9. Do not use the blender outdoors.
10. Do not let the cord hang over the edge of a table or counter.
11. Do not let the cord contact hot surfaces, including the stove.
12. The blades are sharp. Handle them carefully. Use the blade’s guard when storing the blades.

Product Usage Instructions

1. Before using the blender, make sure that the voltage of the power outlet matches the voltage indicated on the motor base.
2. Place the motor base on a flat and stable surface.
3. Fill the cup with the ingredients you want to blend or grind. Do not fill the cup beyond the maximum fill line.
4. Screw the blade assembly onto the cup tightly.
5. Place the cup with the blade assembly onto the motor base and turn it clockwise until it clicks into place.
6. Plug in the blender and turn it on by pressing down on the cup.
7. Blend or grind until you reach your desired consistency.
8. Unplug the blender and remove the cup from the motor base.
9. Unscrew the blade assembly from the cup and clean all parts thoroughly with soap and water before storing them.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against risk of electrical shock do not put cord, plugs, or appliance in water or other liquid.

3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision
   is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.

4. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.

5. Avoid contacting moving parts. Do not attempt to defeat any safety interlock mechanisms.

6. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or is dropped or damaged in any manner. Bring it to a qualified technician for examination, repair or electrical or mechanical adjustment.

7. The use of attachments, including canning jars, cups or covers not recommended or sold by the manufacturer may cause a risk of injury to persons.

8. The blender is not intended for use in the microwave. Do not place the Cups, Motor Base or accessories in
   the microwave as this may result in damage to the appliance.

9. Do not use outdoors.

10. Do not let cord hang over edge of table or counter.

11. Do not let cord contact hot surfaces, including the stove.

12. Blades are sharp. Handle carefully. Use the blade’s collar to handle.

13. Risk of thermal burn injury due to excessive pressure in the container. Do not blend hot liquids.

14. Always completely assemble the blade and cup before placing on the Motor Base. AVOID CONTACT WITH MOVING PARTS.

15. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.

16. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.

FOR HOUSEHOLD  USE ONLY SAVE THESE INSTRUCTIONS ADDITIONAL IMPORTANT SAFEGUARDS

1. All users of this appliance must read and understand this instruction guide before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120 V AC electrical outlet only.
3. If this appliance begins to malfunction during use, immediately release pressure on either cup (small grinding or tall blending) and unplug the cord. Do not use or attempt to repair the malfunctioning appliance.
4. If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water!
5. Do not use this appliance after it has fallen into or becomes immersed in water.
6. To reduce the risk of injury to persons or property, never use this appliance in an unstable position.
7. Do not use this appliance for other than its intended use.
8. Do not use if cup is cracked or chipped.
9. IMPORTANT! This product is not an ice crusher. Always make sure to add at least one cup liquid to the processing cup before adding ice or foods that are frozen solid. Do not overfill. Failure to add enough liquid before processing may cause the processing cup to break or chip.

NOTES ON THE PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

NOTES ON THE CORD

• A. A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
• B. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
• C. If a long detachable power-supply cord or extension cord is used:

1. The marked electrical rating of the cord or extension cord should be at least as great as the electrical rating of the appliance;
2. If the appliance is of the grounded type, the extension cord should be a grounding-type3-wire cord; and
3. The longer cord should be arranged so that it does not drape over the countertop or table top where it can be pulled on by children or tripped over unintentionally.

PLASTICIZER WARNING

CAUTION: To prevent Plasticizers from migrating from the finish of the counter top or table top or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken; permanent blemishes may occur or stains can appear.

ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.

Getting to Know Your 12-Piece Personal Blender Set

Product may vary slightly from illustration

1. 1 x Blending blade
2. 1 x Grinding blade
3. 1 x tall (13.5 oz) cup
4. 1 x To-Go travel cup (16 oz) with handle
5. 1 x small (6oz) cup
6. 1 x To-Go lid with no-drip flexible straw
7. 2 x lip rings
8. 1 x Shaker lid
9. 2 x Storage lids

Before Using for the First Time

1. Carefully unpack the Personal Blending Set and remove all packaging materials. Check the contents to ensure that all parts and accessories are present, and have been received in good condition.

2. Handle the blending blade and the grinding blade attachments by their collars only.
   WARNING: Do not touch blades. Blade attachments are very sharp. Use extreme care when handling. Failure to do so can result in personal injury.

3. Wash all lids in warm, soapy water. Rinse and dry thoroughly.

4. Clean each cup before first use. Fill cup one-quarter full with clean, warm water. Following the steps outlined in the Operating Instructions. Rinse thoroughly.

5. The motor base may be wiped with a damp cloth.
   WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.

Operating Instructions

1. Place the motor base on a flat, clean, dry countertop or table.

2. Make sure the unit is unplugged.

3. The blender comes with 3 sizes of processing cups. Place the food to be processed into the desired cup: tall cup, To-Go travel cup or small cup

4. To assemble for blending, chopping, or mixing, using the blade’s collar to handle, place the blending (cross) blade into tall cup or To-Go travel cup (Figure 2 & 3).

5. To assemble for grinding or whipping, using the blade’s collar to handle, place the grinding (flat) blade into the small cup. (Figure 4) IMPORTANT: Check to make sure the cup ring is not attached to the blending cup before assembling the blade. If it is, simply lift off to remove. IMPORTANT: In the base of each blade’s collar, there is a plastic gasket seal that creates an airtight fit with the cups. After dishwashing and before each use, always check to make sure the gasket is properly in place, as the heat from some dishwashers may cause the gasket to become loose. WARNING: Never operate the blender when the cup is empty.
   WARNING: Never overfill the cup. Do not exceed the MAX line.

6. Hold the cup firmly in one hand. Use the other hand to tighten the cup/blade assembly by turning the blade collar clockwise until snug.

7. Plug the power cord into a 120V AC electrical outlet.

8. Invert the processing cup/blade assembly. Insert the blade collar into the motor base, fitting the tabs into the slots on the motor base.
   NOTE: The blender will not operate unless the 3 locking tabs on the processing cup are properly fitted into the 3 slots on the motor base.

9. To process, press down the processing cup and turn it clockwise into the motor base until it is locked.
   (Figure 5) To stop, press down and turn counterclockwise the cup until the tabs are fully aligned. Release the cup. The blender will operate until pressure is released.
   NOTE: When the blender is used for the first time, it is not uncommon for it to emit a slight odor. This is normal and should disappear with use.

10. When processing is completed, turn the cup counter-clockwise in the base and lift to remove the cup/blade assembly.

11. Invert the cup/blade assembly. Hold the cup firmly in one hand.
    Use the other hand to turn the blade collar counter-clockwise and remove the blade from the processing cup.

12. Add the cup ring to enjoy fresh juice, blended drinks or smoothies immediately. Press down to fasten the cup ring to any of the blending cups.

13. Add the To-Go lid with no-drip flexible straw to the To-Go travel cup to enjoy your drinks on-the-go.

14. Unplug the blender when not in use and before cleaning.

Food Processing Hints

WARNING: Do not operate the motor continuously for more than 1 minute at a time. Allow motor to restfor 3 minutes before continuing.

• For best results, solid foods should not be larger than 1-inch pieces. Cut or tear food into pieces approximately equal in size before processing.
• Fasten either shaker lid to either cup (small or tall) to use for cooking or serving.

Grinding Coffee
Preparing, using, and storing freshly-ground coffee is simple with the blending set.

1. Add coffee beans to the small cup. If desired, add any other flavoring ingredients, such as cinnamon or vanilla bean.
2. Add the grinding blade.

User Maintenance Instructions
This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician.

Care & Cleaning Instructions

CAUTION: Never immerse the motor base, plug or cord in water or any other liquid.

1. Always unplug the Rocket Blender before cleaning.

2. Whenever possible, rinse parts immediately after processing to make cleanup easier.

3. Always handle blades using the blade collar.
   CAUTION: Use extreme care when handling blades. Do not touch the
   blades with your fingers. The blades are very sharp and can cause injury if touched.

4. If necessary, use any small nylon bristle brush to remove processed food from the blade and the blade area.

5. For quick clean-ups, fill processing cup (blending or grinding) onequarter full with clean, warm water. Following the steps outlined in the Operating Instructions. Rinse thoroughly.

6. Remove cup rings after use to clean. Wash all lids and cup rings in warm soapy water. Rinse and dry thoroughly.
   CAUTION: Never use rough scouring pads or abrasive cleansers on any plastic or metal parts as the surface may be damaged.

7. Processing blades, processing cups and lids are all top-rack dishwasher safe.
   IMPORTANT : After dishwashing, always check to make sure the gasket seal in the base of the blade collar is properly in place, as the heat from some dishwashers may cause them to become loose.

8. The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
   WARNING : DO NOT IMMERSE THE MOTOR BASE IN WATER.

Gasket Ring Replacement

• If the gasket ring breaks or visibly deteriorates, remove the old gasket ring from the base of either the blending or grinding blade of your Rocket blender.
• Remove the replacement gasket ring from the bag and wash it with warm soapy water, then pat it dry. Make sure the seal ring is completely dry before replacing it.
• Make sure that the flat surface of the replacement gasket ring is facing downward; while the rounded side of the replacement seal is facing upwards.
• WARNING: Be careful to not touch the blades. Press the seal ring firmly into place, until it is properly installed into the base of either the blending or grinding blade

Storing Instructions

1. Unplug and clean unit.
2. Store in original box or in a clean, dry place.
3. Never store Rocket Blender while it is hot or plugged in.
4. Never wrap cord tightly around the appliance. Never place any stress on cord, especially where the cord enters the unit, as this could cause the cord to fray and break.

Limited Two-Year Warranty

Sensio Inc. dba Made by Gather™ hereby warrants that for a period of TWO YEARS from the date of purchase, this product will be free from mechanical defects in material and workmanship, and for 90 days in respect to non-mechanical parts. At its sole discretion, Sensio Inc. dba Made by Gather™ will either repair or replace the product found to be defective, or issue a refund on the product during the warranty period. The warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty

Exclusions:
The warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified Sensio Inc. dba Made by Gather™ personnel. Also, the warranty does not cover Acts of God such as fire, floods, hurricanes, or tornadoes. Sensio Inc. dba Made by Gather™ shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specific legal rights which may vary by state, province and/or jurisdiction.

How To Obtain Warranty Service
You must contact Customer Service at our toll-free number: 1-877-775-3564. A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to Sensio Inc. dba Made by Gather™ Attach a tag to the product that includes: your name, address, daytime contact telephone number, case number, and description of the problemAlso, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt, and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. Sensio Inc. dba Made by Gather™ shall bear no responsibility or liability for the returned product while in transit to Sensio Inc. DBA Made by Gather™ Customer Service Center

Sensio Inc. dba Made by Gather ™M New York, NY 10016/USA www.cookwithbeautiful.com

References

• Manera – Din nettside leverandør
• Beautiful – Beautiful™

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>