HKoenig SWRC130 Robot Vacuum Cleaner Instruction Manual

HKoenig SWRC130 Robot Vacuum Cleaner

Product Information: SWRC130 Robot Vacuum Cleaner

The SWRC130 is a robotic vacuum cleaner designed for indoor household use. It is equipped with side brushes and air suction passages to effectively clean floors. The product comes with a power adapter and a dust box for easy cleaning.

Product Usage Instructions

1. Read the safety regulations carefully before using the product.
2. Make sure the power adapter is connected to the socket before use to prevent damage to the battery.
3. Remove all vulnerable items and entangling items from the floor before using the product.
4. Turn on the product and let it clean the floor automatically. When the dust box is full, empty it before using the product again.
5. Do not use the product in wet environments or high temperature environments
6. Keep the product and its power cord out of reach of children under 8 years of age.
7. If cleaning and maintenance is required, make sure children under 8 years of age are supervised by an adult.

Following these instructions will ensure safe and effective use of the SWRC130 robot vacuum cleaner.

swrc130

robot vacuum cleaner
aspirateur robot staubsaugerroboter robotstofzuiger robot aspirador robot aspirapolvere odkurzacz automatyczny

Please read this manual carefully before using the product and keep it safe

SAFETY REGULATION

Before using this product, please read the following safety instructions and follow all the safety precautions. Please read the instructions carefully. Please keep these instructions. Any operation inconsistent with this instruction manual may cause damage to this product.
Note: 1. Only authorized technicians can disassemble this product. Users are not recommended to disassemble this product by themselves.
2. Please use the original power adapter only. Other adapters may cause damage to this product.
3. Do not touch wires, sockets or power adapters when your hands are wet.

4. Do not use cloth curtains or body parts to roll into the product drive wheels.
5. Do not place this product near cigarette butts, lighters and other smoldering fires.
6. Do not bend wires excessively or place heavy objects and sharp objects on the machine.
7. This product is an indoor household product. Do not use it outdoors.
8. Do not sit on the product.
9. Do not use this product in wet environment (e.g. bathroom).
10. Before using this product, please remove all vulnerable items (e.g. glasses, lamps, etc.) on the ground as well as items (e.g. wires, paper sheets, curtains) that may entangle the side brushes and air suction passages.
11. Do not put this product in a place where it is easy to fall (e.g. on desks and chairs).
12. Please carefully check whether the power adapter is connected to the

socket before use, otherwise the battery may be damaged.
13. To prevent tripping, please inform other members of the house when this product works.
14. Please empty the dust box before using this product when the dust box is full.
15. The temperature used for this product is 0 to 40 degrees Celsius.
16. Do not use this product in high temperature environment.
17. Please remove the battery from the machine before the product is scrapped.
18. Please make sure that this product is not powered on when removing the battery.
19. Please recycle the discarded batteries safely.
20. The supply cord cannot be replaced. If the cord is damaged the charger should be discarded and replaced. It must be replaced by the manufacturer, its service agent or a

qualified technician in order to avoid a hazard.
21. This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
22. Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
23. Keep the appliance and its power cord out of reach of children under 8 years of age.
24. When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
25. Make sure that the voltage rating on the type plate corresponds to your main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit

26. The device must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.
27. Please keep this document at hand and give it to the future owner in case of transfer of your device
28. The charger must be removed from the socket before removing the battery, cleaning or maintaining the appliance.
29. This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge, provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.
30. Your appliance has been designed for domestic use only. It is not intended for use in the following situations which are not covered by the warranty:
– in staff kitchen areas in shops, offices and other professional environments,

– in farm hostels, – by guests in hotels, motels and other residential environments, – in bed and breakfast type environments.
Warning:
1. Use only the original rechargeable battery and charging station specially equipped by the manufacturer. Nonrechargeable batteries are strictly prohibited, please refer to “product parameters” for battery specification information. 2. It is forbidden to use products in environments with open flames or fragile objects. 3. It is forbidden to use products in extremely hot (above 40 °C) or extremely cold (below 0 °C) weather. 4. It is forbidden for human hair, clothes, fingers and other parts to

approach the opening and operating parts of the product.
5. It is forbidden to use products on wet or stagnant ground.
6. It is forbidden for products to absorb any articles such as stones and waste paper that may clog products.
7. It is prohibited for the product to absorb any inflammable substances, such as petrol, toner and toner for printers or photocopiers. It is also prohibited to use the product in clean areas with flammable items.
8. It is forbidden for products to absorb any burning articles, such as cigarettes, matches, ashes and other articles that may cause fire.
9. It is forbidden to place articles at the suction port. Do not use the product when the suction port is blocked. Clean up dust, cotton wool, hair etc. at the suction port to ensure smooth air circulation at the suction port.
10. Use the power cord carefully to avoid damage. It is forbidden to use

the power cord to drag or pull the products and the product charging station. It is forbidden to use the power cord as a handle. It is forbidden to clamp the power cord in the crack of the door. It is forbidden to pull the power cord at sharp corners and corners. It is forbidden for the product to run on the power cord while the power cord should be far away from the heat source.
11. Do not use damaged charging station.
12. Even if the product has been severely damaged, burning of the product is prohibited, which may lead to explosion of the battery of the product.

PRODUCT COMPOSITION/ PACKAGE CONTENTS

Host

Charging station

Remote control

Water tank

Mop

Cleaning brush

Dust box

Cleaning brushes

PART NAME
Top
Start/pause key Surface Cover Omnidirectional Lens
Bottom
Ground Sensor Left Side Brush
Left Wheel
Dust box
Charging pole Piece Universal Wheel Battery cover
Rolling brush assembly
Dust box

Water tank, Dust box buton
Right Side Brush Right Wheel

HEPA Filter Primary Filter Strainer Dust Box Metal Sheet
Charging station

HEPA Filter Cover Conductive Shrapnel Dust Box Side Cover
Signal Indicator

DC Socket
Charging Pole Piece
Water tank and mop assembly
Water Injection Port Water Tank Mop

Remote control
Auto Cleaning Mode / Powerful Suction Mode /
Quiet Cleaning Mode Start / Pause
Schedule Setting

Display Screen
Mode Switching(Mopping Mode / Single Room Mode / Border Mode) Direction Control
Time Setting Recharging

PRODUCT USAGE

Remove Protection
Before using the host, remove the protective strip on the host and the protective film on the charging station.

Remove the protective strip

Remove protective film

QRcode to download APP
Thanks for buying our robot vacuum cleaner. Please read this manual carefully before use. Please follow up the manual during operation for your safe. There are wifi-version and non-wifi version of our SWRC130 model. If your robot is wifi-version, please read the Quick Guide for APP Using in the next page; If your robot is non-wifi version, please skip the page of Quick Guide for APP Using. ***Please make sure that your robot, your router, and your phone are close to each other before you start APP connection.

APP setting
1. Download the APP and register
1. Please scan the QR code or search”Smart Life”and download APP 2. After the App is installed, please following the App instruction to
registered the account and login

QUICK GUIDE FOR APP USING
Tap + on the top right corner to add device [Fig 6];

Tap Small Home Appliance [Fig 7]; Choose Robot Vacuum [Fig 8]; Click Confirm indicator rapidly blink [Fig 9]; Type your WIFI Password [Fig 10] and start device connection [Fig 11];

Fig 6

Fig 7

Fig 8

Fig 9

Fig 10

Adding device succeeded [Fig 12].

Fig 11

Rename your device, e,g. Robot SWRC130 [Fig 13]; Start using App to control your robot [Fig 14].

Fig 12
2. APP Operation

Fig 13

Fig 14

You may click “Auto cleaning”, “Recharge mode”, “Room cleaning”, “Edge cleaning”, “Spot cleaning” as you want to start certain cleaning mode [Fig 15] [Fig 16]; Choose Cleaning strength to enter suction power setting interface [Fig 17];

3. Scheduling
ChoosFeigS1c5hedule cleaning to eFnitger16scheduling interfaceFiagn1d7Choose

“Add Schedule” [Fig 18]; choose the proper working time [Fig 19] and day (multiple Mon-Sun) [Fig 20].

Fig 18

Fig 19

Fig 20

4. Start / Pause / Standby / Sleeping mode
Press ” ” / ” ” to start / pause the robot [Fig 21]; Note: When the robot pauses over 10 minutes, it will enter sleeping mode; If it is in sleeping mode, press ” ” , the robot will be waken up to standby mode; Press the cleaning mode as you want to start working.

Working Map and Cleaning Record
The App will show the map of working cleaning path of the robot [Fig 22]; But it may not update in real time; Tap “Cleaning record”, it will show the cleaning records of working time and cleaned area, also you can clear the data[Fig 23].

Fig 21

Fig 22

Fig 23

6. Find robot

You may not know where the robot is when it finishes cleaning and

stops. Then press “Positioning of

” [Fig 24]; then there is “Ding

Dong” sound prompt for you to find the robot.

7. Mute
Tap “More” to enter mute function setting interface [Fig 25]; If mute function is active, the robot will cancel voice prompt, so it will not bother you [Fig 26].

Fig 24

Fig 25

Fig 26

8. Supported Third-party Control

The robot works with Amazon Alexa, Google Assistant, and some other

third part control devices. Tap

in the top right corner [Fig 27], then

find “Supported Third party Control” and tap corresponding icon to learn

connection way [Fig 28].

9. Share Devices

Only one main ID for one single device is available. If you want to share

the device to others in your family, tap

on the right corner; Choose

“Share devices” [Fig 29]; type correct registered cellphone number/ email

ID to add additional users [Fig 30].

Note: other users have to register Tuya ID before added.

Fig 27

Fig 28

Fig 29

Fig 30

10. Reset WIFI

Changing the connection from existing WIFI network to new WIFI network, you need to reconnect your robot to the new WIFI network after initializing your robot as follows: turn on the robot, after the voice

prompts “Welcome to use sweeping robot”, press the start button twice continuously, then the voice prompts “Connecting network”, and

WIFI icon

begins to flash constantly, your robot is initialized; Then

you could connect it to new network.

Thanks for buying our robots and wish you enjoy using.

Notes: The APP software is upgrading, the actual APP user interface may be different from the statements in this manual. Some functions may be added while some functions mentioned above may be deleted. As different countries has different network policy, the real time map

displaying function may be delayed or may not be fulfilled. If other languages’ version of this APP instruction is confusing or inaccurate, please refer to English version. Our company reserves the right to change the parameters without prior notice.

PRODUCT USE / HOST CHARGING

1. Placing and charging: The charging station is against the wall and placed on a flat ground. Do not place articles within the range of 0.5m left and right and 1.5m ahead.
2. Connect the power supply. 3. Installing side brush: Install the side brush according to the left and
right (L/R).

Charging attention:

1. Charging: Place the host on the charging station for charging.

(During charging, the indicator light

flashes; If charging is

over, the light is always on. The charging time is about 5 hours.

AttentionWhen manual charging,
please keep the front bumper of the robot 2cm away from the charging station to ensure the metal contacts connected well for a successful charging

2. The charging station cannot be used in environments with strong reflection such as direct sunlight or nearby mirrors. If there is any object with strong reflection, please cover it 7cm from the bottom.
3. In order to ensure the normal working hours of the host, please fully charge it before use. The charging time is about 5 hours.
4. When charging, do not assemble the water tank assembly to the robot vacuum, so as to ensure the safety of charging and prevent wet mops from damaging the floor.
5. During the cleaning process, the host can sense that its power is insufficient and automatically start the recharging mode to find the charging station to recharge. You can also command the host to start the recharging mode through the recharging button on the remote controller.

PRODUCT USE / START CLEANING

According to different cleaning needs, the product has a variety of cleaning modes to choose from. You can start various cleaning modes through a host, remote control or app.
Automatic Cleaning

Setting method: In the shutdown state, press the button for a few

seconds. When the indicator light

of the host is on, it indicates that

the host is powered on. When the button

on the host is pressed for

a short time, or press the automatic cleaning button controller, the host starts automatic cleaning.

on the remote

If it is dustbin instead of water tank installed in the host, and in standby

mode or other working modes, press the button on the remote controller, the host starts automatic cleaning. Press the button again, the host will switch to powerful suction mode. Press the button

once more, the host will switch to quiet cleaning mode. Pressing

the button

additionally more times will make the host switch

between powerful suction mode and quiet cleaning mode circularly.

If the water tank is installed in the host, and in standby or other working

modes, pressing the button mopping mode.

will always make the host enter into

MOPPING MODE

Applicable scenario: Used to do wet & dry mopping.

Setting method: Install the water tank to the host and press the start

button on the host or the button or controller, the host starts mopping mode.

( ) on the remote

(Attention: If the water tank is not installed, press the button ( ) on the remote controller, the host will prompt that the water tank is not installed and the host will not work at this status.)

Press the button (

),the host will

switch to single room cleaning mode.

Press the button (

), the host will

switch to border cleaning mode.

SINGLE ROOMM CLEANING

Applicable scenario: Used to clean the single room.

Setting method: Click the remote-control mode switch button

(

) to select the single room cleaning mode to start the single room

cleaning.

Friendly Reminder: When it is only necessary to clean a single room, please close the door and the host will do centralized cleaning in the room.

If this room does not have a charging station, the host will return to the original point after finishing cleaning.

BORDER SWEEPING

Applicable scenario: For indoor border cleaning, the host cleans along the perimeter of fixed objects (such as walls), and returns to the charging station after the border cleaning finished.

Setting method: Click the remote control mode switch button (

)

to select the border cleaning mode to start the border cleaning.

MANUAL CONTROL

Applicable scenario: Suitable for manual control cleaning.

Setting method: Click on the buttons

on the remote

PRODUCT USE / PAUSE, WAKE UP AND SHUT DOWN

Pause: During the operation of the host, press the host button

or

the pause button on the remote controller or app to pause the host.

Wake up: If the host stops working for more than ten minutes, it will automatically enter into sleep mode (all the host lights are off). You can

wake up the host by pressing the host button or any button on the

remote controller, or the button on app.

Shut down: After the host stops working, press the host button for a few seconds and all the indicator lights of the host go out to indicate that

the host has been shut down.
PS: Before the schedule setting, you need to press the button to set the current time of the host first. Press the button, then press the buttons to set the hour and minute of the current time. After it, press the button, then the setting is completed.

PRODUCT USAGE / SCHEDULE SETTING

Schedule setting: Press the remote-control schedule setting button

to set the host scheduled cleaning time. First press the button

,

then press the buttons to set the hour and minute. After it, press the

button , then the setting is completed.

The host will automatically start to clean at the scheduled time every day.

PS: Before the schedule setting, you need to press the button to set

the current time of the host first. Press the button

, then press the

buttons to set the hour and minute of the current time. After it, press

the button

, then the setting is completed.

PRODUCT USE/ WATER TANK USE

Do not use the floor mopping function on carpets. After mopping the floor, please empty the water tank in time and remove the mop.

1. Add water

2. Install the Water Tank Assembly

3. Install Mop

4. Start Mopping the Floor

Component maintenance / dust box
A. Press the dust box B. Open the dust button to take out box side cover; the dust box;

C. Dumping the rubbish out the dust box;

D. Open the HEPA filter cover

E. Open the HEPA filter cover and take out the HEPA filter and the primary filter. It is not recommended to wash the HEPA filter by water. Tap gently to remove the dust;

F. Rinse the primary G. The dust box

filter

should be

scrubbed

H. Dry the dust box and filter assembly and keep it dry to ensure its service life;
I. Replace the primary filter and the HEPA filter into the dust box;
Note: 1. Before installing the filters, please ensure that the HEPA filter and the primary filter are in dry state. 2. Do not expose the HEPA filter and primary filter to the sun.

J. Close the dust box cover and install the dust box into the host. Note: Do not allow water to seep into the fan port when cleaning.

COMPONENT MAINTENANCE / WATER TANK AND MOP 2. Take out the water 1. Remove the mop tank assembly
4. Empty the Water Tank 3. Washing mop

6. Airing.

5. Dry or naturally dry thE water tank.

HOW TO CLEAN THE RUBBISH IN THE DUSTBIN OF THE WATER TANK 1. Put the water tank horizontally with
the dustbin port upside
2. Clean up the rubbish in the dustbin of the water tank with running water.

3. Dry up the conductive shrapnel

COMPONENT MAINTENANCE / ROLLER BRUSH AND SIDE BRUSH 1. Open the roller brush cover
assembly;
2. Take out the roller brush shaft;
3. Use the cleaning brush to cut off the hair tangled on the roller brush;
4. Clean the side brush.

COMPONENT MAINTENANCE / CHARGING PIECES, GROUND SENSORS, DRIVE WHEELS AND UNIVERSAL WHEEL

Friendly Reminder: The interior of the charging pole pieces, the ground sensors and the front bumper all contain sensitive electronic components. Please use dry mop to clean the above parts and do not use wet mop to prevent damage caused by water inflow.

1.Clean the charging 2.Clean the ground

pole pieces.

sensors.

3.Clean the drive wheels and the

universal wheel.

If you do not use the product for a long time, please fully charge it before storing. Turn off the host and keep charging power to it every 3 months to prevent the battery from over discharge.
If the battery is over discharged or is not used for a long time, the product may not be able to be charged. Please contact our company for after-sales maintenance. Do not disassemble it by yourself.

COMMON PROBLEMS

No. Prompt Tone

Cause of Failure

Solution

1

Wheels off the ground.

Host suspended.

Please put the host back to the ground and press the cleaning key again.

2

Dust box not installed.

Dust box removed and not installed.

Replace the dustbin to the host and press the cleaning button again.

3 Battery failure.

Abnormal battery charging.

Contact after-sales service to test the battery.

Please check if 4 the wheel is
stuck.

Wheel jammed.

Check whether the wheel is entangled with foreign objects and clean up the entangled objects.

5

Please check if the front bumper is stuck.

Front bumper bracket stuck.

Check whether the front bumper can be bounced normally.

Machine

6

Robot connection failed to

failed.

connect to

server.

Check whether the wireless network connected during distribution can connect to the internet.

The battery is low, Battery power The host automatically

7 please charge the less than

switches to recharging

machine.

20%.

mode.

Please check

8

whether the side Abnormal brush is tangled side brush.

or jammed.

Check whether the side brush is twined by wire or hair and clean up the wire or hair.

Please move the The machine Please move the host to an

9

machine to the open area.

failed to get empty place and press the out of trouble. cleaning key again.

PRODUCT PARAMETER

Classification Structural class Battery
Sweeping parameter
Host

Item Diameter Height Net weight Voltage Battery Bin capacity Charging type
Cleaning mode
Charging Time Cleaning Time Rated power (w) Operating voltage ( v )

Parameter
330 mm
74mm
2.7 kg
14.4 volts 2500 mah rechargeable lithium battery pack 600 ml Automatic charging / manual charging Auto/ Schedule/ Single room/ Fixed point/ Border/ Mop floor About 300 minutes
About 120 minutes
28
14.4

WARRANTY

The warranty period for our products is 2 years, unless otherwise stated, starting from the date of initial purchase or the date of delivery. If you have any problems or questions, you can easily access our help pages, troubleshooting tips, FAQ, and user manuals on our service site: https://sav.hkoenig.com. By typing the reference name of your device in the search bar, you can access all available online support, designed to best meet your needs. If you still cannot find an answer to your question or problem, then click on “Did the answer solve your problem?”. This will direct you to the Customer Support Request Form, which you can fill out to validate your request and get help.

WARRANTY CONDITIONS
The warranty covers all failures occurring under normal use, in accordance with the usage and specifications in the user’s manual. This warranty does not apply to packaging or transportation problems during shipment of the product by the owner. It also does not include normal wear and tear of the product, nor maintenance or replacement of consumable parts.

EXCLUSION OF WARRANTY
– Accessories and wearing parts (*). – Normal maintenance of the device. – All breakdowns resulting from improper use (shocks, failure to comply with power supply recommendations, poor conditions of use, etc.), insufficient maintenance or misuse of the device, as well as the use of unsuitable accessories. – Damage of external origin: fire, water damage, electrical surge, etc. – Any equipment that has been disassembled, even partially, by persons other than those authorized to do so (notably the user).

– The products whose serial numbers would be missing, deteriorated or illegible that would not allow its identification. – The products subjected to leasing, demonstration, or exhibition.
(*) Some parts of your device, called wear parts or consumables, deteriorate with time and frequency of use of your device. This wear and tear are normal but can be accentuated by poor conditions of use or maintenance of your device. These parts are therefore not covered by the warranty. The accessories supplied with the device are also excluded from the warranty. They cannot be exchanged or refunded. However, some accessories can be purchased directly through our website: https://sav.hkoenig.com/.

ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled.

References

• H.Koenig : Le spécialiste du petit électroménager
• HKOENIG SAV: Pièces détachées ,accessoires, FAQ
• HKOENIG SAV: Pièces détachées ,accessoires, FAQ

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>