savio TWS-10 Bluetooth Earphones User Manual
- June 11, 2024
- Savio
Table of Contents
TWS-10 Bluetooth Earphones
User Manual
TWS-10 Bluetooth Earphones
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, social media or on the website of the store where you
made the purchase. If you want to show our device on SAVIO Facebook Page, we
will be very pleased.
If there is something that we could improve on our products, please write to
us at support@savio.net.pl.
Thanks to your feedback, we will be able to better adapt the product to your
expectations.
Before starting the use of purchased device it is recommended to read the
whole manual.
Product diagram:
- Multi-function touch button
- Microphone
- LED indicator on earphones
- Charging USB-C socket in power bank
- Docking station / power bank
- LED display
Charging device:
2.1 Charging the earphones and power bank from an external power source.
2.1.1 Connect the USB-C cable to the charging socket in the power bank.
2.1.2 Insert the earphones into the dock (the LED display will start blinking
in white informing about power bank charging). When earphones are discharged,
the diodes on earphones will light up in red colour and charging will start.
2.1.3 If the power bank is fully charged, the LED screen will show 100%. When
earphones are fully charged the diode will turn off. Earphones are ready to
use.
Charging the earphones using the built-in power bank.
2.2.1 Insert the earphones into the power bank dock.
2.2.2 The earphones diodes will light up red to indicate charging.
2.2.3 If the earphones are fully charged, the red backlight will turn to blue
andlast for around 15 sec then turn off. The earphones are ready to use.
Earphones pairing:
3.1 Take out the earphones from power bank, the earphones will automatically
power on, earphones diodes will start blinking in red and blue colour
informing that the earphones are power on. After properly pairing the
earphones with each other, one earbuds will still blinking , the second one
goes off. The earphones are ready to pair with smartphone.
3.2 Turn on the Bluetooth in the device (e.g. smartphone), choose SAVIO TWS-10
earphones from Bluetooth devices, then pair them. If the earphones had already
been paired with the device, they will be connected automatically. After
proper connection of the earphones the diodes will stop blinking.
3.3 Earphones are ready to use.
Touch control function:
| Left earphone (L)| Right earphone (R)
---|---|---
Answer a call| Single press
End a call| Double press
Rejecting an incoming call| Press and hold (per 2 s)
Play / Pause| Single press
Next song| | Triple press
Previous song| Triple press|
Volume increase| | Double press
Volume decrease| Double press|
Turn ON Google Assistant / Siri| Press and hold (per 2 s)
Restart earphones:
Take out the earphones from power bank and turn off Bluetooth function in your smartphone. On one of earphones press 6 times the touch button.
Package content:
- Wireless earphones
- USB-A – USB-C charging cable
- Docking station / power bank
- User manual
- Additional silicone pads: S, M, L sizes
Technical specification:
- Bluetooth version: 5.3
- Supported Bluetooth profile: HFP / HSP / A2DP / AVRCP / SPP
- Total working time: up to 25 h (with use of power bank)
- Earphones working time on single charging cycle: up to 5 h
- Frequency response: 20 Hz – 20 kHz
- Impedance: 32 Ω
- Microphone sensitivity: -42 ± 3 dB
- Weight of earphones: 2 × 3.4 g
- IPX waterproof rating: IPX4
- Charging port: USB-C
- Built-in microphone: yes
- Control by touch
Safety conditions:
- Use the product in accordance with its intended use, as improper use may damage the product.
- For charging the power bank it is highly recommended to use 1 A charger, or charge it from a USB port in the computer.
- Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
- The device should be cleaned only with a dry cloth.
- Independent repairs and modification result automatic loss of the warranty.
- Hitting or dropping may damage the product.
Information of the utilization of electrical and electronic equipment
**** This symbol indicates that electrical appliances should not be dis-
carded with other household waste. Used equipment should be handed over to a
local collection point for this type of waste or to a recycling center. Please
contact your local authorities for information about disposal methods
available in your area. Waste electrical equipment may contain hazardous
substances (e.g. mercury, lead, cadmium, chromium, phthalates) which can get
into air, soil and groundwater when leaking from used appliances.
Environmental pollution with these substances leads to their bioaccumulation,
causing lesion of disease in living organisms, which would pose a risk to
human and animal health or life. Households may contribute to environmental
protection by proper waste collection. In such way, hazardous substances from
the equipment are neutralized and valuable secondary raw materials are reused
for production of new equipment.
Information for customers and contractors and communication regarding
complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection
Regulation (EU) 2016/679 of the European Parliament and of the Council of 27
April 2016 (hereinafter referred to as GDPR), please be advised that Elmar Sp.
z oxo., with its registered seat at up. Morrow 81; 35-323 Rzeszów becomes the
Administrator of your personal data. The Specialist for General Data
Protection (SODO) can be contacted in writing to: SODO, Elmar Sp. z oxo., ulu.
Morrow 81; 35-323 Rzeszow, via e-mail address:
sodo@elmak.pl, and by phone at +48 (17) 854 98 14.
Your personal data will be processed in order to perform the contract, in
accordance with Article 6(1)(b) of the aforementioned regulation, to the
extent resulting from tax laws and financial regulations. Recipients of your
personal data include entities authorized by legal regulations to obtain
personal data as well as processing entities providing services to Elmar Sp. z
oxo. Your personal data will be stored on the basis of Administrator’s
legitimate interest. You have the right to access your data, and the right to
rectify, delete or limit processing of your data. You have the right to lodge
a complaint to the supervisory body if you believe that the processing
violates the GDPR. The provision of personal data is voluntary, however, a
failure to provide such data may result in a refusal to conclude or in
termination of a contract. Your personal data will not be subjected to
automated decision making, including profiling referred to in Article 22
section 1 and 4 of the GDPR of April 27, 2016.
Warranty:
The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.net.pl/en/service
PRODUCER:
Elmar Sp. z oxo.
ulu. Morrow 81
35-323 Rzeszów
www.savio.net.pl