BRESSER STR-48B Bi-Color LED Ring light Instruction Manual

BRESSER STR-48B Bi-Color LED Ring light

Product Information

The STR-48B is a bi-color LED ring light designed for use in photography and videography. It has a color temperature range of 3200K to 5600K, allowing for adjustment to different lighting situations. The product comes with a power cable for use with a power outlet or can be powered by a recommended battery. The device has a two-year warranty period and conforms to applicable guidelines and standards.

Product Usage Instructions

Before using the STR-48B, ensure that it is stored in a safe place out of reach of children and animals. When using the device, make sure that no one can trip over the connection cables and that the device is placed in a way that it cannot tip over. Only use the recommended power cable or battery for power supply to avoid voltage damage. Do not disassemble the device in the event of a defect; contact your dealer for repair. When using the device, ensure that people and animals do not look directly into the light to avoid glare and potential accidents. The device should be disconnected from the power supply when not in use or during maintenance and cleaning work. For more detailed instructions about this product in a particular language, visit the website via the provided QR code or link.

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

www.bresser.de/PF004355

GENERAL WARNINGS

DANGER OF BODILY INJURY!

• Do not use in the presence of children or animals. Store out of reach of children and animals.

RISK OF MATERIAL DAMAGE!

• Make sure that no one can trip over connection cables of the device. The device could be knocked over.
• Only use the recommended power cable or the recommended battery for the power supply!
• The manufacturer accepts no liability for voltage damage caused by the use of an unsuitable power supply!

DANGER OF AN ELECTRIC SHOCK!

• This device contains electronic parts that are powered by a power source (power adapter). Only use the device as described in the manual. Otherwise, you run the DANGER of

ELECTRIC SHOCK

• Never bend, squeeze or pull power cables, connecting cables, extensions or connectors. Protect cables from sharp edges and heat.
• Check this device, cables and connections for damage before use.
• Never attempt to operate a damaged device, or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorized service agent.
• Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.

RISK OF GLARE!

• Make sure that people and animals do not look into the light. The high luminosity can cause glare to the eyes and afterimages. This impairment of vision can lead to accidents.

FIRE/EXPLOSION HAZARD!

• Always place the device in such a way that it cannot tip over and ensure that it is stored in a reasonably safe place.
• Keep children and animals away from the device! They could knock the device over.
• Make sure that no one can trip over connection cables. The device could be knocked over.
• Do not expose the device to high temperatures. Do not short-circuit the device or dispose of in fire! Excessive heat and improper handling can cause short circuits, fires and even explosions!
• Only use the recommended power supply*!

IMPORTANT NOTE

• Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
• Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of a longer interruption of operation and before any maintenance and cleaning work.
• Place your device so that it can be disconnected from the power supply at any time. The power outlet should always be near your appliance and should be easily accessible, as the plug of the power cord serves as a disconnect device from the mains supply.
• To disconnect the unit from the mains, always pull the mains plug and never pull the cable!
• Do not subject the device to excessive vibrations.

DECLARATIONS

EC DECLARATION OF CONFORMITY

BRESSER has issued a „Declaration of Conformity“ in accordance with applicable guidelines and corresponding standards. The full text of the CE-declaration of conformity is available at the following internet address: www.bresser.de/download/F004355/CE/F004355_CE.pdf

UKCA DECLARATION OF CONFORMITY

Bresser UK Ltd. has issued a „Declaration of Conformity“ in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address: www.bresser.de/download/F004355/UKCA/F004355_UKCA.pdf

Bresser UK Ltd.

• Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

WARRANTY & SERVICE

The regular guarantee period is 2 years and begins on the day of purchase. You can consult the full guarantee terms and details of our services at www.bresser.de/warranty_terms. Would you like detailed instructions for this product in a particular language? Then visit our website via the link below (QR code) for available versions.

• www.bresser.de/warranty_terms

DELIVERY CONTENT

• LED Light (A), AC power adapter (B), mains power cable (C)

PARTS OVERVIEW

LED LIGHT WITH SMARTPHONE ADAPTER (A)

1. LED Lightsource
2. Handle (2x)
3. Dimmer knob
   • When turned on, the brightness range is 10-100%
4. Color temperature adjuster
5. Tilt joint with locking screw
6. Fixing screw (tripod connection)
7. Tripod connection
8. Vents
9. Battery holders
10. Power switch
11. 3x Cold shoe
12. Smartphone holder
13. (for Smartphones with a width of approx. 55 – 85 mm)
14. Camara adapter
15. DC connection socket
16. USB port
    • MAINS ADAPTER WITH CABLES (B)
17. Mains power adapter with 2-pole connection socket (16a) and function light (16b)
18. Voltage cable (permanently connected to mains power adapter) with DC hollow plug (17a)
19. Power cable with 2-pole plug (18a) and Euro plug (18b)

ESTABLISHING THE POWER SUPPLY

1. Insert the DC hollow plug of the power cable (⓱) into the power connection socket (⓮) on the ring light.
2. Insert the Euro plug (⓲b) of the power cable into the power outlet.

INSTALLING A V-MOUNT BATTERY FOR POWER SUPPLY (OPTIONAL)

1. If you require more mobility or don´t have access to a mains supply, the light can also be operated by separately available rechargeable batteries (Sony type NP-F750/960)
2. Insert them into the battery holders (➒)

USING

TURNING ON THE LED LIGHT

1. Establish the power supply for the device (insert battery or connect power cable).
2. Move the power switch (➓) to the ‘I’ position to switch the device on by battery.
3. Move the power switch (➓) to the ‘II’ position to switch the device on by mains adapter.
4. Move the on / off switch (➎) to the ‘0’ position to switch off the device. The last settings made are retained until the device is switched on again.

Important: Disconnect the device from the power supply if it is not going to be used for a long period of time!

BRIGHTNESS ADJUSTMENT

1. Turn the dimmer knob (➌) clockwise to increase the brightness.
2. Turn the dimmer knob (➌) counterclockwise to decrease the brightness.

COLOR TEMPERATURE ADJUSTMENT

1. Briefly turn the color temperature adjuster (➍) to set the desired light temperature. The CCT range is 3200K and 5600K.

ADJUSTING THE TILT ANGLE

1. Hold the ring light and slowly loosen the locking screw for the tilt joint (➎).
2. Move the lamp head to the desired position and tighten the locking screw (➎) again hand-tight.

MOUNTING ON A TRIPOD (optional)

1. Loosen the fixing screw (➏) for the tripod connection so far that the opening of the tripod connection is exposed.
2. Place the lamp with the opening of the tripod connection (➐) on the spigot adapter of a tripod and tighten the fixing screw firmly.

Note

• The ring light can also be held with the handles (➋) that can be attached with the four screws included.
• In this way, the lighting position can be changed quickly and easily.

ATTACHING ACCESSORIES (optional)

• The ring light has three so-called cold shoes (⓫) which can be used to attach the camera adapter (⓭) with the Smartphone holder (⓬), for example.

USING THE USB PORT

• The USB port (⓯) on the backside can be used to charge the Smartphone or Camera while it is attached to the ring light.

DISPOSAL

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! As per the Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

TECHNICAL DATA

• “SONY” and the Sony Logo are registered trademarks of Sony Group Corporation.

Service

Please contact the service centre first for any questions regarding the product or claims, preferably by e-mail.

• e-mail: service@bresseruk.com
• Telephone: +44 1342 837 098

BRESSER UK Ltd

• Customer Support
• Suite G3, Eden House
• Enterprise Way Edenbridge, Kent TN8 6HF
• United Kingdom

Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.

Bresser GmbH

• Gutenbergstraße 2
• 46414 Rhede · Germany
• www.bresser.de

Bresser UK Ltd.

• Suite 3G, Eden House
• Enterprise Way Edenbridge, Kent TN8 6HF
• Great Britain

@BresserEurope

Errors and technical changes reserved.

References

• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | BRESSER STR-48B Bi-Color LED Ringleuchte 48W dimmbar mit Kamera- und Smartphonehalter | Expand Your Horizon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>