LANCOM GS-3528XUP Multi-Gigabit PoE++ Access Switch User Guide

LANCOM GS-3528XUP Multi-Gigabit PoE++ Access Switch

Hardware Quick Reference

• LANCOM GS-3528XUP

1. Configuration interface (Console)
   Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring/monitoring the switch.

2. TP Ethernet interfaces 10M / 100M / 1G PoE+
   Use Ethernet cables to connect interfaces 1 to 12 to your PC or a LAN switch.

3. TP Ethernet interfaces100M / 1G / 2.5G PoE++
   Use Ethernet cables to connect interfaces 13 to 24 to your PC or a LAN switch.

4. SFP+ interfaces 1G / 10G
   Insert suitable LANCOM SFP modules into the SFP+ interfaces 25 to 28. Choose cables that are compatible with the SFP modules and connect them as described in the module’s documentation.

5. Power connector (device back side)
   Supply power to the device via the power connector. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord.

6. ATTENTION: High touch current possible! Connect to Earth before connecting the power supply.

• Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
• Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
• The power plug of the device must be freely accessible.
• Please note that support for third-party accessories (SFP and DAC) is not provided.

Please observe the following when setting up the device

• The power plug of the device must be freely accessible.
• For devices to be operated on the desktop, please attach the adhesive rubber footpads
• Do not rest any objects on top of the device
• Keep all ventilation slots on the side of the device clear of obstruction
• Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

System / Link/Act/Speed / PoE

• System: off Device switched off
• System: green Device operational
• System: red Hardware error
• Link/Act/Speed: green Port LEDs show link/activity status or port speed
• PoE: green Port LEDs show PoE status

Mode- / Reset button

• Short press Port LED mode switch
• ~5 sec. pressed Device restart
• Pressed until all port LEDs glow Configuration reset and device restart

TP Ethernet ports 10M / 100M / 1G PoE+

LEDs switched to Link/Act/Speed mode

• Off: Port inactive or disabled
• Green: Link 1000 Mbps
• Green, blinking: Data transfer, link 1000 Mbps
• Orange: Link < 1000 Mbps
• Orange, blinking: Data transfer, link < 1000 Mbps

LEDs switched to PoE mode

• Off: Port inactive or disabled
• Green: Port enabled, power supply to the connected device
• Orange: Hardware error

TP Ethernet ports 100M / 1G / 2.5G PoE++

LEDs switched to Link/Act/Speed mode

• Off:   Port inactive or disabled
• Green:   Link 2500 – 1000 Mbps
• Green, blinking:   Data transfer, link 2500 – 1000 Mbps
• Orange:   Link < 1000 Mbps
• Orange, blinking:   Data transfer, link < 1000 Mbps

LEDs switched to PoE mode

• Off:   Port inactive or disabled
• Green:   Port enabled, power supply to the connected device
• Orange:   Hardware error

SFP+ ports 1G / 10G

• Off:   Port inactive
• Blue:   Link 10 Gbps
• Green:   Link 1000 Mbps

Hardware

• Power supply Internal power supply unit (110–230 V, 50–60 Hz)
• Power consumption Max. 870 W
• Environment Temperature range 0–40°C; short-term temperature range 0–50°C; humidity 10–90%, noncondensing
• Housing Robust metal housing, 19“ 1U (442 x 44 x 375 mm > W x H x D) with removable mounting brackets, network connectors on the front
• Number of fans 1

Interfaces

• ETH: 12 TP Ethernet ports 10 / 100 / 1000 Mbps PoE+ 12 TP Ethernet ports 10 / 100 / 2500 Mbps PoE++
• SFP+: 4 SFP+ ports 1 / 10 Gbps 28 concurrent ports in total

Package Content

• Mounting brackets 2 19” brackets for rack mounting
• Cable 1 IEC power cord, 1 serial configuration cable 1.5 m

LANCOM, LANCOM Systems, LCOS, LANcommunity, and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of theirs. owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. 111675 / 0423.

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of
Conformity is available at the following Internet address: www.lancom- systems.com/doc

References

• Business network solutions "engineered in Germany": LANCOM Systems GmbH
• LANCOM SFP modules: LANCOM Systems GmbH

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>