DINSTAR C60LP Business IP Phone User Guide
- June 11, 2024
- DINSTAR
Table of Contents
DINSTAR C60LP Business IP Phone User Guide
Thanks for Choosing Dinstar’s IP Phone!
Please read this guide carefully before using this product. If you need any technical support, please contact us.
Tel: +86 755 61919966
Email: support@dinstar.com
Website: www.dinstar.com
1. Packaging Contents
The following items are included in your package. If you find anything missing, please contact our supporting and customer center.
Note: The C60LP IP Phone is powered by PoE, the power adapter will not be provided.
2. Hardware Component Instructions
3. Assembling the IP Phone
Attach the stand to the IP Phone, as shown below:
Connect the handle, headset, PC and power supply as shown in the figure below:
Note: PC connection and extension connection are optional.
4. Startup
After the IP Phone is powered on and connected to network, it will start up automatically. And then the IP Phone is ready for use. You can configure the phone via the phone’s user interface or the web user interface.
5. Configure the IP Phone
There are two ways to customize the configurations of the IP Phone.
- Configure via the user interface on the IP Phone
- Configure via the web interface on your PC
Configure via the user interface on the IP Phone
The LCD screen and the keypad on the IP Phone allows you to execute all call operation tasks and basic configuration changes directly on the phone.
Network Setting
By default, the phone attempts to contact a DHCP server in your network to obtain its valid network settings, e.g., IP address, subnet mask and gateway address .
If your phone cannot contact a DHCP server, you need to configure network settings manually.
For more information about account parameters, please refer to the user manual of the IP Phone.
Configure via the Web interface on your PC
Accessing the web interface on PC
(3) Enter the username (default: admin) and password (default: admin) in to the login page and then click Login .
Network Setting
Click Network → Basic to configure the LAN port and the PC port.
If there is a need, click Network Advanced to configure the VLAN, VPN, SNMP,
TR069, LLDP, local RTP, QoS and 802.1x.
Account Setting
Click Account → Basic to configure the basic information of an account.
For the explanation of the account parameters, please refer to Configure via
the user interface on the Phone.
If there is a need, click Account → Advanced to configure the codec, DTMF, call-related information and etc. for the account.
6. Basic Call Features
Place a call
Using the handset
- Pick up the handset.
- Enter the number and then press the Send soft key.
Answer a call
Using the handset
Pick up the handset.
7. Customize the IP Phone
Read More About This Manual & Download PDF: