StarTech com C2-DD46-UA2-CBL-KVM 2-Port Dual Monitor Cable KVM Switch User Guide

StarTech com C2-DD46-UA2-CBL-KVM 2-Port Dual Monitor Cable KVM Switch

OVERVIEW

Top

Sides

Front

1

|

LED Indicators

| •           Solid Green = Selected PC is Connected

•           Blinking Green = Selected PC is not detected

•           Amber LED = Selected Audio Source

2| PC 1 Audio Connectors| •           Green: Connect to 3.5mm Headphone Port

•           Pink: Connect to a 3.5mm Microphone Port

3| PC 1 USB-A Host

Connector

| •          Connect to a USB-A port on PC 1
4| PC 1 DisplayPort Connectors| •          Connect to a DisplayPort Enabled Computer

5

|

Remote Port Selector

| •          A wired button used to switch between PC 1

and PC 2

•          Press and Release the Remote Switch to switch between PC 1 and PC 2

6| PC 2 DisplayPort Connectors| •          Connect to a DisplayPort Enabled Computer
7| PC 2 USB-A Host

Connector

| •          Connect to a USB-A port on PC 2
8| PC 2 Audio Connectors| •           Green: Connect to 3.5mm Headphone Port

•           Pink: Connect to a 3.5mm Microphone Port

9| Console Microphone Port| •           Pink: Connect a Microphone
10| Console Audio Output| •           Green: Connect an Audio Device (ie. Speakers or Headphones)
11| Console DisplayPort Output Ports| •          Connect to two DisplayPort Displays
12| Console USB HID Ports| •          Connect a USB Mouse and Keyboard

Product Information

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/C2-DD46-UA2-CBL- KVM

Package Contents

• KVM Switch x 1
• Quick-Start Guide x 1

Requirements

• DisplayPort Enabled Computers x 2
• DisplayPort Cables x 2
• DisplayPort Display x 2
• USB HID Devices (Keyboard / Mouse) x 2
• (Optional) Microphone x 1
• (Optional) Powered/Active Stereo Speakers or Headphones x1
• (Optional) Headset x 1
  Note : A Headset may require the use of a Headset Adapter. Please check with the manufacturer of the Headset for more details.

Installation

Connect the Computers

Note : Power off all Computers, Displays, and Peripherals before completing the following installation steps.

1. Connect the built-in PC 1 DisplayPort Connectors to the DisplayPort Output Ports on PC 1.
2. Connect the built-in PC 1 USB Host Connector to a USB-A Port on PC 1.
3. (Optional) Connect the built-in PC 1 Audio Connectors to the corresponding 3.5 mm Audio Ports on PC 1.
4. Repeat Steps 1-3 to install PC 2.

Connect the Console

1. Connect a USB Mouse and Keyboard to the Console USB HID Ports, located on the front of the KVM Switch.
2. Connect a DisplayPort Cable from each DisplayPort Display to each of the Console DisplayPort Output Ports, located on the front of the KVM Switch
3. (Optional) Connect a 3.5 mm Audio Cable from the Stereo Speakers or Headphones to the Speaker Audio Port (green), located on the side of the KVM Switch.
4. (Optional) Connect a 3.5 mm Audio Cable from the Microphone to the Microphone Audio Port (pink), located on the side of the KVM Switch.

Operation

Switching with the Remote Port Selector

To switch between which Host Computer is active, press and release the button on the Remote Port Selector.

Software Operation

Install the KVM Switching Software on each computer connected to the KVM Switch to use features such as autoscan, fixed audio, and more.
Note: To download the latest KVM Switching Software, please visit: www.StarTech.com/C2-DD46-UA2-CBL-KVM

Hotkey Reference Guide

Note : Each hotkey sequence keystroke should be pressed within two seconds.
Keyboard with Scroll Lock: To switch Computers the hotkey combination is Scroll Lock + Scroll Lock + 1 – 2
Keyboard with no Scroll Lock: Use the available software to define the new hotkey sequence

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.

CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Information

This product is backed by a two-year warranty.
or further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power

StarTech.com
Ltd. 45 Artisans Cres London, Ontario N5V 5E9 Canada
StarTech.com LLP
4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.
StarTech.com
Ltd. Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW
StarTech.com
Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

References

• 2-Port Dual-Monitor Cable KVM Switch - KVM Switches | StarTech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>