INTELLINET 561853 52-Port L2+ Fully Managed Switch Instructions
- June 11, 2024
- INTELLINET
Table of Contents
52-Port L2+ Fully Managed Switch with
48 Gigabit Ports and 4 SFP+ Uplinks
Instructions
Model 561853 (IES-48GM04B)
Important: Read before use. For additional benefits:
Scan to register your product warranty
or go to: register.intellinet-network.com/r/561853
561853 52-Port L2+ Fully Managed Switch
This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit intellinet-network.com.
Register your product at register.intellinet-
network.com/r/561853 or scan
the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
- on a level surface that can support the weight of the switch (and any other items that need to be considered);
- with a minimum of 25 mm (approx. 1”) of clearance on the top and sides for adequate ventilation;
- away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
- where it cannot be affected by excessive moisture;
- within 100 m (approx. 328’) of network devices it’s to be connected to.
The switch includes brackets and screws for optional rack mounting.
- Disconnect any cables from the switch.
- Position a bracket over the mounting holes on one side of the switch and secure it in place with screws.
- Repeat Step 2 on the other side of the switch.
- Position the switch in the rack and screw the brackets to the rack.
- Reconnect any cables.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal
connector is used to provide proper grounding for your Intellinet Network
Solutions switch. If you use the chassis grounding screw, it should be wired
to an object that provides earth ground. In rackmount installations, grounding
is typically provided by the metal frame of the mounting rack.
Connections
- All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches, etc.
- Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
- Use the included power cable to connect the receptacle on the back of the switch to a power outlet.
LED| Color| Status| Operation
---|---|---|---
RUN| | Off| Check connection.
Red| Blinking| System is booting.
Green| Blinking| System has booted successfully.
1-48 Link| | Off| No link established.
Orange| On| Port is connected at 10/100 Mbps.
Blinking| Data is transmitted/received at 10/100 Mbps.
Green| On| Port is connected at 1000 Mbps.
Blinking| Data is transmitted/received at 1000 Mbps.
49S-52S (SFP+)| | Off| No link established.
Orange| On| Port is connected at 1000 Mbps.
Blinking| Data is transmitted/received at 1000 Mbps.
Green| On| Port is connected at 10,000 Mbps.
Blinking| Data is transmitted/received at 10,000 Mbps.
Basic Web-Based Browser Management
- Open your Web browser.
- Enter http:// and the IP address of the switch in the Address field. The default management IP address is 192.168.2.1.
- Press Enter to display the login screen. In the Username field, enter admin; in the Password field, enter the serial number on the bottom of the switch. Click OK.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate
Collection Systems)
This symbol on the product or its packaging means that this product must not
be treated as unsorted household waste. In accordance with EU Directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this
electrical product must be disposed of in accordance with the user’s local
regulations for electrical or electronic waste. Please dispose of this product
by returning it to your local point of sale or recycling pickup point in your
municipality.
WARRANTY AT:intellinet-network.com
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction
manual may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own
expense. Any changes or modifications made to this equipment without the
approval of the manuafacturer could result in the product not meeting the
Class A limits, in which case the FCC could void the user’s authority to
operate the equipment.
CE
This device complies with the requirements of CE 2014/30/EU (UKCA
Electromagnetic Compatibility Regulations 2016) and / or 2014/35/EU (UKCA
Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity
for is available at: support.intellinet-
network.com/barcode/561853
North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677 USA| Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan| Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver, Germany
---|---|---
All trademarks and trade names are the property of their respective owners.
intellinet-network.com
All trademarks and trade names are the property of their respective owners.
© IC Intracom. All rights reserved.
Intellinet Network Solutions is a trademark of IC Intracom, registered in the
U.S. and other countries.
**** Printed on recycled paper.
INT_561853_QIG_0423_REV_5.12
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product
- Intellinet Network Solutions Account and Product Registration
- Intellinet Network Solutions Account and Product Registration