AQUEON OptiBright Seascape Smart LED Light Owner’s Manual
- June 27, 2024
- Aqueon
Table of Contents
OptiBright® SMART LED Light
Seascape SMART LED Light
OWNER’S MANUAL
OptiBright Seascape Smart LED Light
Control from anywhere with Aqueon BluelQ”
|
---|---
https://qrcodes.pro/GNYiSy| https://qrcodes.pro/IXGrEL
Scan For Fre e App Download
IMPORTANT SAFETY INSTRUCTIONS
WARNING – To guard against injury, basic safety precautions should be observed including the following:
-
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
-
DANGER – To avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment. For each of the following situations, do not attempt to repair yourself; return the appliance to an authorized service facility for service or discard the appliance:
A. If the appliance falls into the water, DON’T reach for it! First unplug it and then retrieve it. If electrical components of the appliance get wet, unplug the appliance completely.
B. Carefully examine the appliance after installation. It should not be plugged in if there is water on the parts not intended to be wet.
C. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or if it is dropped or damaged in any manner.
D. To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium stand and tank to one side of the wall-mounted receptacle to prevent water from dripping onto the receptacle or plug. As shown in the figure, a “drip loop” should be arranged by the user for each cord connecting an aquarium appliance to the receptacle. The “drip loop” is the part of the cord below the level of the receptacle, or the connector of an extension cord is used, to prevent water travel along the cord and coming in contact with the receptacle. If the plug or the receptacle does get wet, DON’T unplug the cord. Disconnect the fuse to the circuit breaker that supplies power to the appliance. Then unplug and examine for the presence of water in the receptacle. -
Close supervision is necessary when any appliance is used by or near children.
-
To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs, etc.
-
Always unplug an appliance from the outlet when not in use, before putting on or taking off parts, and before cleaning.
Never yank the cord to pull plug from the outlet. Grasp the plug and pull to disconnect. -
Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition.
-
Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing.
-
Make sure an appliance mounted on a tank is securely installed before operating it.
-
Read and observe all the important notices on the appliance.
-
If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.
-
This appliance is recommended for use over a glass aquarium cover or panel. The appliance is intended FOR HOUSEHOLD USE ONLY.
ONLY FOR POLARIZED ATTACHMENT PLUG APPLIANCES -
If this appliance has a polarized plug (one blade is wider than the other) as a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature.
-
SAVE THESE INSTRUCTIONS
FIXTURE INSTALLATION INSTRUCTIONS
- This product is recommended for use over glass-covered aquariums.
- Aqueon* glass covers fit on the inside lip of the aquarium to prevent seepage out of the aquarium.
-
Position the fixture over your aquarium by adjusting the legs (Fig 1} to the proper length.
The legs should be extended to securely hold the fixture in place. Always center the fixture so that it provides maximum exposure of light to all aquarium inhabitants. -
Connect the transformer to the jack on the cable on the side of the fixture.
-
Plug the transformer into an acceptable outlet.
Be sure to incorporate a “drip loop” to prevent water droplets from running down the cord and into the outlet should any water get onto the cord. -
The light fixture will flash when first plugging in. The Wi-Fi indicator light on the side of the fixture will blink when trying to connect to a device. Once connected to either Wi-Fi or Bluetooth, the respective indicator light will remain on to verify it is connected.
TO PAIR WITH BluelQ” APP:
Pairing your fixture using Wi-Fi will give you all light and scheduling features. Account setup is required.
-
Download and open Aqueon BluelQ” app.
-
Tap on “Equipment” at the bottom of the app. Your fixture will automatically attempt to pair with your phone.
-
Tap Pair on the pop up.
If fixture does not appear in Equipment screen, make sure your Bluetooth is tumed on.
If your mobile device has Bluetooth tumed on and the fixture does not attempt to pair with your mobile device, complete a factory reset before continuing (See Factory Reset). -
Tap on your fixture listed under Products in your app.
-
Choose to connect with either Wi-Fi or Bluetooth from the pop-up.
Recommended to connect to Wi-Fi:
For full functionality, a Wi-Fi connection is required.
If intending to control the device with Bluetooth, some functionality will be limited.
To switch from a Bluetooth connection to Wi-Fi:
For iOS Users: Go to equipment screen, swipe left on the fixture name and select “Forget”. Wait for your fixture to appear under “Products”, then select it and choose Connect to Wi-Fi to proceed.
For Android Users: Tap on the 3 dots next to the fixture name and select “Connect to Wi-Fi”. -
If connecting with Wi-Fi, select your Wi-Fi network from the list and enter your credentials when prompted.
Note: If you experience connection issues when joining the Wi-Fi network, you may have a weak signal at your device. Please attempt to connect again. If that doesn’t work, move your router and fixture so they are closer to each other. -
After connecting to Wi-Fi, enter a descriptive name for your fixture.
-
Tap your fixture name to start customizing!
FACTORY RESET
If your fixture is not able to pair to your mobile device or you want to pair to a different mobile device, you may need to factory reset. Follow these steps to complete the factory reset:
-
Delete fixture from mobile device Bluetooth settings For iOS Users:
a. Open your settings app
b. Select Bluetooth
c. Tap the icon next to your previously paired device and select “Forget This Device”
For Android Users:
a. Open your settings app
b. Select “Connections > Bluetooth”
c. Tap the icon for your previously paired device and select “Unpair” -
Delete the fixture from the BluelQ” app » Tap on “Equipment” at the bottom
-
Swipe left (for iOS Users) OR tap the 3 dots (Android Users) on the name of the fixture you are resetting and tap “Forget”
-
Remove the rubber stopper from the reset port on the side of the fixture and insert the end of a paperclip or pen to hit the reset button. Click and hold the reset button for 20 seconds to reset the fixture. The Wi-Fi indicator light will turn off briefly and start blinking when the reset is completed.
-
After factory resetting your device. proceed with pairing your fixture to your mobile device using Wi-Fi or Bluetooth. (See To Pair with BluelQ™ App)
IMPORTANT CLEANING & SERVICING PRECAUTIONS
CLEANING:
It is important to keep this appliance clean. Unplug and remove the unit
from the aquarium.
Wipe exposed surfaces carefully with a damp cloth to remove any dust or
mineral deposits which may collect over time. Make sure all surfaces are dry
before reinstalling.
SERVICING:
In order to assure proper electrical connections and polarity, replacement
parts and servicing should be performed only by a qualified electrician.
WARNING:
Lightning Mode contains bright. flashing lights that may not be suitable
for people with photosensitive epilepsy. Viewer discretion is advised.
LIMITED WARRANTY
Central Aquatics warrants that this product shall be free from defective
electrical components due to defects in materials or workmanship for a period
of twelve months from the date of purchase. If a defect is shown, Central
Aquatics will, at the sole discretion of Central Aquatics, either repair or
replace the product without charge. No cash refunds will be made. This
warranty is provided solely to the original consumer purchaser of the product
and may not be transferred or assigned. You must retain original proof of
purchase to validate this warranty.
This warranty does not apply to damage resulting from accident, misuse, abuse,
lack of reasonable care, failure to follow safety and installation
instructions, use of the product with non-standard electrical service, or any
other defect not resulting from defects in the electrical components of the
product or defects in materials or workmanship. This warranty will not be
effective unless and until the Central Aquatics product is shown to have been
used in accordance with the safety and installation instructions accompanying
the product, including the requirement that the product be used over a covered
aquarium.
THIS CONSTITUTES THE ENTIRE CENTRAL AQUATICS WARRANTY AND CENTRAL AQUATICS
MAKES NO OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE
PRODUCT. CENTRAL AQUATICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IF CENTRAL AQUATICS CANNOT LAWFULLY DISCLAIM
IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED
IN DURATION TO THE DURATION OF THIS WARRANTY.
CENTRAL AQUATICS IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR
UNDER ANY OTHER LEGAL THEORY.
CENTRAL AQUATICS EXPRESSLY DISCLAIMS ALL ALLEGED DAMAGES FOR LOSS OF AQUATIC
LIFE, PERSONAL INJURY, AND/OR PROPERTY DAMAGE. Some states and provinces do
not allow the exclusion or limitation of incidental or consequential damages
or exclusions or limitations on the duration of implied warranties or
conditions, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights
that vary by state or province.
Central Aquatics shall not have any obligations under this warranty unless the
owner notifies Central Aquatics in writing of any alleged defect(s) within 30
days of discovery of the defect(s). Any notice to Central Aquatics must be
delivered by United States or electronic mail to one of the following
addresses:
U.S. Mail: Central Aquatics – Aqueon, 5401 West Oakwood Park Drive, Franklin,
Wisconsin 53132
Electronic Mail: info@Central-Aquatics.com
Central Aquatics shall be allowed a reasonable period of time to investigate
any warranty claim and to perform any testing Central Aquatics deems necessary
to determine the cause of the defect. This warranty shall be interpreted under
the laws of the state of Wisconsin.
For additional information regarding this limited warranty, please contact us
at the addresses above, or call us at
888-255-4527.
FCC CERTIFICATION
This device complies with Part 15 of the FCC Rujes. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>