8BitDo Ultimate C 2.4G Wireless Controller User Manual
- June 11, 2024
- 8Bitdo
Table of Contents
8BitDo Ultimate C 2.4G Wireless Controller
Overview
- Press the home button to turn on the controller. (The controller will stay on the previous mode)
- Hold the home button for 3 seconds to turn off the controller.
- Hold the home button for 8 seconds to force the controller off.
Windows
- required system: Windows 10 (1903) or above.
a wireless connection
- connects the 2.4G receiver to the USB port of your Windows device.
- press & hold X+home to turn on the controller, wait till the controller is successfully recognized by your Windows device, Status LED stays solid.
wired connection
- press & hold X+home to turn on the controller.
- connect the controller to your Windows device via USB cable, wait till the controller is successfully recognized by your Windows device, Status LED stays solid.
Raspberry Pi & Android
OTG support is required on your Android device, please contact your manufacturer for more information.
a wireless connection
- connects the 2.4G receiver to the USB port of your device.
- press & hold B+hometoturn on the controller, wait till the controller is successfully recognized by your device, Status LED stays solid.
wired connection
- press & hold B+hometo turn on the controller.
- connect the controller to your device via USB cable, wait till the controller is successfully recognized by your device, Status LED stays solid.
Turbo function
- status LED blinks continuously when the button with turbo functionality is pressed.
- D-pad, and joysticks are not included.
- hold the button you would like to set turbo functionality to and then press the star button to activate/deactivate its turbo functionality.
Battery
25 hours of playtime with a 480mAh built-in battery pack, rechargeable with 2
hours of charging time.
Support
Please visit support.Bbitdo.com for further
information & additional support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>