ZEVNI A04410 Contemporary Frosted Glass Globe LED Mini Pendant Light Instruction Manual
- June 9, 2024
- ZEVNI
Table of Contents
Contemporary Frosted Glass Globe LED Mini Pendant Light
Instruction Manual
Item Number: A04410
A04410 Contemporary Frosted Glass Globe LED Mini Pendant Light
WARNING (To reduce the risk of fire, electric shock, or personal injury):
-
We suggest installation by a licensed electrician.
-
Please read the instruction carefully and save it as you may need it at a later time.
-
Before you start, NEVER attempt any work without shutting off the electricity until the work is done.
» Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position.
» Place the wall switch in the “OFF” position. -
Mounting surface should be clean, dry, flat, strong enough and 1/4” larger than the canopy on all sides.
Any gaps between the mounting surface and canopy exceeding 3/16” should be corrected as required. -
Make sure that the ceiling or wall can stand the weight of the lamp before installation.
-
Make sure the voltage you are using is 120V. The maximum wattage is 5W.
-
Keep the lamp away from acidic and alkaline substances in case of damaging the surface of the lamp.
-
When replacing bulbs, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
-
The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution and care must be used with any electrical products.
IMAGE FOR FINISHED PRODUCT:
ORDERING PARTS
Keep this sheet for future reference in case you need to order replacement
parts. All parts for this fixture can be ordered from the place of purchase.
Be sure to use exact wording from illustration when ordering parts.
CLEANING
To clean, wipe the fixture with a soft cloth. Clean glass with a mild cleaner
(such as mild and nonabrasive soap). Do not use abrasive materials such as
scouring pads or powders, steel wool or abrasive paper.
TOOLS REQUIRED (NOT INCLUDED):
Before starting assembly and installation please prepare the needed tools as
below picture
| | | |
---|---|---|---|---
Ladder| Phillips head.flat blade screwdriver| Electrical tape| Pliers| Wire
cutter/Stripper
PARTS TYPE & QTY INCLUDING:
(A) Mounting plate (1)
(B) Green ground screw (1)
(E) Canopy (1)
(F) Lock nut (1)
(G) Knob nut (2)
(H) Cable (1)
(I) Tube (I)
(J) Socket (1)
(K) Glass shade (1)
ACCESSORIES & QTY ENCLOSED:
(C) Wire connector (3)
(D) Mounting screw (2)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
-
Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the above illustration.
-
Turn off power
Before you start the installation, NEVER attempt any work without shutting off the electricity until the work is done.
» Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position.
» Place the wall switch in the “OFF” position. -
Make installation
Step A1 » Unscrew knob nuts (G) from canopy (E) then remove mounting plate (A).
Step A2 » Attach mounting plate (A) to the outlet box with mounting screws (D).
Step A3 » Make wire connections
Connect wires as below wires connection shown. PLEASE NOTE THAT GROUND WIRE IS BARE COPPER WIRE, NEVER CONNECT OTHER WIRES TO GROUND WIRES.Twist wires together with plastic wire connectors until tightly joined, and
wrap each connector with approved electrical tape. Be sure that no wire
strands are exposed and then carefully tuck all wires into the outlet box.
Connect ground wires according to the below chart
Connect wires
according to the below chart***Connect Black or Red Supply Wire to:| Connect
White Supply Wire to:
---|---
Black| White
Parallel cord ( round & smooth )| *Parallel cord ( square & ridged )
Clear,Brown,Gold or Black without tracer| Clear,Brown,Gold or Black with tracer
Insulated wire ( other than green ) with copper conductor| Insulated wire ( other than green ) with silver conductor
*Note: When parallel wires ( SPT I & SPT II ) are used. The neutral wire
is square shaped or ridged and the other wire will be round in shape or smooth
( see illus. ) 
Twist wires together with plastic wire
connectors until tightly joined, and wrap each connector with approved
electrical tape. Be sure that no wire strands are exposed and then carefully
tuck all wires into the outlet box.
Step A4 » Raise canopy (E) to the ceiling and secure canopy (E) in place
by tightening knob nuts (G) onto the preassembled screws in mounting plate
(A).
NOTE: canopy (E) should be snug against the ceiling with knob nuts (G).
If not, decrease or increase the threaded length of preassembled screws, then
tighten the pre assembled hex nuts and back to Step A4.
Step A5 » Screw glass shade (K) onto socket (J).
To adjust the hanging height of the fixture:
• press down and hold lock nut (F) by hand;
• pull or push cable (H) in and out of canopy (E) to increase or decrease the
hanging height.
- Check everything is already installed properly, then you could turn on the light. Enjoy!
**+1 850 296 2377
Working hours : Mon Fri 9:00 a.m. 16:00 p.m. EST
homecustomercare@outlook.com
[ www.ihomeangel.com**](http://www.ihomeangel.com)
Documents / Resources
|
ZEVNI A04410 Contemporary Frosted Glass Globe LED Mini Pendant
Light
[pdf] Instruction Manual
A04410 Contemporary Frosted Glass Globe LED Mini Pendant Light, A04410,
Contemporary Frosted Glass Globe LED Mini Pendant Light, Globe LED Mini
Pendant Light, LED Mini Pendant Light, Mini Pendant Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>