akasa AK-HDA-03 SSD and HDD Adapter User Manual
- June 11, 2024
- akasa
Table of Contents
akasa AK-HDA-03 SSD and HDD Adapter
Product Information
The SSD & HDD adapter, product code AK-HDA-03, is a device that allows you to mount a 2.5-inch hard disk drive (HDD) or solid-state drive (SSD) into a 3.5-inch drive bay. It is designed to fit into most desktop computer cases and is compatible with various operating systems. The adapter comes with mounting screws for both the drive and the case, as well as a user manual in different languages including English, French, Spanish, Japanese, Chinese, and Russian. It also features electrostatic discharge (ESD) protection to prevent damage to your drives.
Product Usage Instructions
- Open your desktop computer case and locate an available 3.5-inch drive bay.
- Insert the SSD & HDD adapter into the drive bay, aligning the screw holes with those on the case.
- Secure the adapter to the case using the included case mounting screws.
- Attach the 2.5-inch HDD or SSD to the adapter using the included drive mounting screws.
- Connect the necessary power and data cables to the drive and your motherboard or power supply.
- Close your computer case and power on your system.
- If necessary, format and partition your new drive using your operating system’s disk management tools.
Note: Always ensure that your computer is powered off and unplugged before installing or removing any hardware components.
AKASA Company Notices
The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of AKASA, except as allowed under copyright laws. The only warranties for AKASA products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. AKASA shall not be liable for technical or editorial errors or omissions contained herein.
WARNING
Electrostatic discharge (ESD) can damage system components. Use an ESD-
controlled workstation. If such a workstation is not available, wear an
antistatic wrist strap or touch an earthed surface before handling any PC
components.
Contents
- drive adapter
- 2.5” drive mounting screws
- case mounting screws
- user manual
Installation
HDD interface direction
Documents / Resources
|
akasa AK-HDA-03 SSD and HDD
Adapter
[pdf] User Manual
AK-HDA-03 SSD and HDD Adapter, AK-HDA-03, SSD and HDD Adapter, HDD Adapter,
Adapter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>