Akasa A-NUC63-A1B / A-NUC63-M1B Newton TN Fanless case for 11th Generation User Manual
- June 5, 2024
- akasa
Table of Contents
User manual
Product Code: A-NUC63-A1B / A-NUC63-M1B
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-
controlled workstation is not available, wear an antistatic wrist strap or
touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges
can cause injury if not handled with care. Keep away from children.
Contents
① Thermal compound
②③ Thermal gap filler
④ Screws for the motherboard (M3)
⑤ Washer
⑥ EMI gasket
⑦ Thermal gap filler (for M.2 SSD)
⑧ Thermal module (for M.2 SSD)
⑨ Serial cable
⑩ Serial cable screws| ⑪ 2.5” HDD/SSD screws (M3)
⑫ 2.5” HDD/SSD mounting bracket
⑬ HDD protective film
⑭ SATA adapter cable
⑮ HDD mounting bracket screws
⑯ VESA mounting screws
⑰ Case feet kit
⑱ Motherboard standoffs
---|---
Front panel layout
Rear panel layout
Internal layout
A Aluminium heatsink for heat transfer
B Front panel PCB
C M/B mounting standoffs
D 2.5” HDD / SSD mounting holes
Internal cable connectors
Connect the case internal cable connectors to the corresponding motherboard headers.
NOTE: If the connectors are not apparent on the board consult your motherboard manual. Connecting the panel to the wrong headers may result in motherboard damage.
Installation
| |
---|---|---
VESA mounting Instructions
Case feet installation
5140244104 V2
2021/05
Documents / Resources
|
Akasa A-NUC63-A1B / A-NUC63-M1B Newton TN Fanless case for 11th
Generation
[pdf] User Manual
Newton TN Fanless case for 11th Generation, A-NUC63-A1B, A-NUC63-M1B
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>