akasa A-NUC76-M1B Chassis Power Fanless Cases User Manual
- June 8, 2024
- akasa
Table of Contents
akasa A-NUC76-M1B Chassis Power Fanless Cases
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-
controlled workstation is not available, wear an antistatic wrist strap or
touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges
can cause injury if not handled with care. Keep away from children.
Contents
Thermal compound
- Washer
- Screws for motherboard (M3)
- M.2 SSD heatsink
- Thermal gap filler (for M.2 SSD)
- Clips/Screws
- EMI gasket
- 2.5” HDD/SSD screws (M3)
- 2.5” HDD/SSD mounting bracket
- HDD protective film
- Screws ⑫ End cover ⑬ Standoffs
- a Case feet
- b Screws (6-32)
- c Screws (M3)
Layouts
Front Panel Layout
Rear Panel Layout
Internal Layout
- Aluminium heatsink for heat transfer B
- M/B mounting standoffs C
- 2.5” HDD / SSD mounting holes
Installation
Case feet installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>