akasa A-NUC92-A1B Chassis Power Thermal Solution User Manual
- October 30, 2023
- akasa
Table of Contents
User Manual
Product Code:
A-NUC92-A1B / A-NUC92-M1B
A-NUC63-A1B / A-NUC63-M1B
A-NUC92-A1B Chassis Power Thermal Solution
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-
controlled workstation is not available, wear an antistatic wrist strap or
touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges
can cause injury if not handled with care. Keep away from children.
Contents
1. Thermal compound
2.3. Thermal gap filler
4. Screws for motherboard (M3)
5. Washer
6. EMI gasket
7. Thermal gap filler (for M.2 SSD)
8.Thermal module (for M.2 SSD)
9. Serial cable
10. Serial cable screws
11. 2.5″ HDD/SSD screws (M3)
12. 2.5″ HDD/SSD mounting bracket
13. HDD protective film
14. SATA adapter cable
15. HDD mounting bracket screws
16. VESA mounting screws
17. Case feet kit
18. Motherboard standoffs
Front Panel Layout
Real Panel Layout
Internal Layout
A. Aluminium heatsink for heat transfer
B. Front panel PCB
C. M/B mounting standoffs
D. 2.5″ HDD / SSD mounting holes
Internal Cable Connectors
Connect the case internal cable connectors to the corresponding motherboard
headers.
NOTE : If the connectors are not apparent on the board consult your
motherboard manual. Connecting the panel to the wrong headers may result in
motherboard damage.
Intallation
VESA Mounting Instructions
Case Feet Intallation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>