Pixio PX248PS Gaming Monitor User Guide
- June 11, 2024
- Pixio
Table of Contents
PX248 Prime S
Gaming Monitor
User Guide
PX248PS Gaming Monitor
The color and the appearance may differ depending on the product, and the
specifications are subject to change without prior notice to improve the
performance.
The contents of this manual are subject to change without notice to improve
quality.
Copyright ©2023 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA
Inc. I All Rights Reserved.
Use or reproduction of this manual in parts or entirety without the
authorization of Pixio USA Inc is prohibited.
Brand: Pixio
Product Name: 23.8in IPS FHD 165Hz Gaming Monitor
Product Code: PX248PS
FCC ID: 200619006EMC-1
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
JOIN THE RED TEAM !
- Get all the latest updates and exclusive promotions
- Chances to win monthly, free giveaways
RISK OF ELECTRIC SHOCK DO NOT OPEN THE MONITOR.
OPENING MONITOR BACK COVER WILL VOID YOUR WARRANTY.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this
product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Before Using the Product.
Installation Space
Ensure some space around the product for ventilation. An internal temperature
rise may cause fire and damage the product.
Make sure to allow some space. Do not install near heater or any other high
temperature product or humidifier.
- Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight for an extended period of time.
- Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging material will be the best method for successful delivery.
- Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents to clean the monitor. They may result in permanent damage to the panel and will void the warranty.
- Always check to make sure the power cord is unplugged before cleaning the monitor.
- Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components in the monitor.
- Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.
- Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries.
- When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider for best results.
- The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up.
- Avoid confined spaces like a bookcase for proper functionality.
- If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk of damage from lighting strikes or other abnormal voltage incidents.
- Do not overburden any socket to prevent risk of fire or shock.
- Do not stick any foreign objects into the monitor to prevent risk of fire or shock.
- Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the warranty as well. Contract Pixio directly for all RMA issues.
- Take note of elevation and temperature zone warnings on the adapters.
- The icon indicates that the adapter is suited for areas under 2000 meters.
- The icon indicates that the adapter is suited for non-tropical areas.
Cleaning the Product.
Take the following steps when cleaning.
-
Power off the product and computer.
-
Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. -
Wipe the monitor with a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
Do not spray water or detergent directly on the product. -
Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
-
Connect the power cord to the product when cleaning is finished.
-
Power on the product and computer.
Notice.
Characteristics of Crystal Display Monitors
When the following potential issues occur, please be aware that the monitor is
functioning in accordance of manufacturing tolerances and does not mean the
monitor has a defect.
- When first turning on the monitor, the screen may flicker. Please turn the monitor off and turn it back on.
- The brightness levels on different images may appear uneven.
- The effective pixel count should approximate 99.99%, but there may be a possible 0.01 % or less failure rate due to dead or stuck pixels.
- If the monitor displays a single static image for a long period of time, there may be an image burn that can be seen while viewing a different image. The burned image will gradually disappear and turning off the monitor for an extended period of time will speed up the process.
- If you notice extended, constant flickering or if the screen constantly goes to black, please contact Pixio directly and we will assess and have the unit repaired if necessary. Please do not attempt to repair the unit yourself as it will result in voiding the warranty
Preperation.
Product Includes:
Product Assembly:
Take out the base, insert the base into the stand, and lock one M4x6mm, H=1
2.5mm hand screw.
Dimension & Weight.
Net Weight: 2.9kg (6.39lb) l Gross Weight: 4.1kg (9.04lb)
Monitor Inputs.
- DC
- HDMI1 HDMI 2.0, 165Hz, FreeSync Premium
- HDMI2 HDMI 2.0, 165Hz, FreeSync Premium
- DP DisplayPort 1.4, 165Hz, FreeSync Premium
- DP DisplayPort 1.4, 165Hz, FreeSync Premium
- AUDIO OUT
*WARNING:
Always use the appropriate power cord.
Control Panel.
Menu
Short Cut
| Up | Input selection Short Key |
|---|---|
| Down | Brightness Adjustment Short Key Menu |
| Left | Preset selection Short Key Menu |
| Right | Game Assist selection Short Key Menu |
Main OSD Navigation
How
to Reconfigure
| Up | Move up the OSD Menu / Increase Value |
|---|---|
| Down | Move down the OSD Menu / Decrease Value |
| Left | Move left on the OSD Menu / Back |
| Right | Move right on the OSD Menu / Enter |
| Press | Turn ON / OFF the OSD Menu |
To turn ON/OFF the OSD Menu, Press Jog Button.
OSD Menu.
Display
- Brightness: Adjust the display brightness value from 0 to 100.
- Contrast: Adjust the display contrast value from 0 to 100.
- Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
- Preset: Select Preset from Standard, User, Movie, Photo, RTS, FPS1, and FPS2.
- Aspect Ratio: Select Aspect Ratio from Full, 16:9, and 4:3. [disabled when turn on the FreeSync]
- Sharpness: Adjust the Sharpness value from 0 to 100.
- Ultra Vivid: Turn Ultra Vivid On or Off.
Color
- Color Temperature: Select Color Temperature from Warm, Normal, Cool, sRGB, and User.
- Gamma: Select Gamma from Off, 1.8, 2.0, 2.2, and 2.4.
- Hue: Adjust the Hue value from 0 to 100.
- Saturation: Adjust the Saturation value from 0 to 100.
- Low Blue Light: Adjust the Low Blue Light value from 0 to 100.
Gaming Setup
-
FreeSync: Turn FreeSync On or Off.
-
Overdrive: Select Overdrive from Off, Low, Middle, and High.
-
Game Assist: Select Game Assist from Time, Crosshair(LoS), and FPS Counter.
Timer: Select Timer from Off, 15:00, 30:00, 45:00, 60:00 and 90:00
Crosshair(LoS): Select Crosshair type. FPS Counter: Turn FPS Counter On or Off. -
DCR: Turn DCR On or Off.
-
MPRT: Turn MPRT On or Off.
Input
- Switch the signal input to Auto Select, DP1(1.4), DP2(1.4), HDMI1(2.0), or HDMI2 (2.0).
System
Set
-
Language: Change the OSD menu display language
-
OSD Setup: Select OSD Setup from H Position, V Position, OSD Timeout, Transparency.
H Position: Adjust 0-100
V-Position: Adjust 0-100
OSD Timeout: Adjust 15-60
Transparency: Adjust 0-100 -
Audio: Select Audio from Volume or Mute.
Mute: turn On or Off
Volume: Adjust 0-100 -
Reset: Select Reset from Cancel or Confirm.
-
Firmware Update: Firmware Update from Cancel or Confirm.
User
Data
- User Data: Load/Save Brightness, Contrast Black Equalizer, Saturation, Preset, Color Temperature, Gamma, Overdrive, Volume, Mute, Low Blue Light settings on the monitor.
Adaptive-Sync. (AMD FreeSync or Nvidia G-Sync.)
FreeSync technology is solution that eliminates screen tearing without all the
usual lag and latency. This feature will eliminate screen tearing and lag
during game play. Improve your gaming experience. The displayed FreeSync menu
items on the monitor may vary, depending on the monitor model and
compatibility with the AMD graphics card.
Nvidia G-Sync
If you are using Nvidia GTX 10series or RTX20series graphic cards, you can use
Adaptive-Sync (FreeSync) function. This requires Nvidia’s latest GPU updates.
Please download and latest update if you are intend to use Adaptive-Sync
(FreeSync) over your Nvidia GTX graphics cards.
FYI, How to enable FreeSync on Nvidia GPU
- Right-click on the Windows desktop and select Nvidia Control Panel
- Expand the Display section of the left-hand navigation pane and select Set up G-Sync
- Check the “Enable G-Sync, G-Sync Compatible” box and select the Active Sync display you’d like to use if you have more than one monitor
- Check the “Enable settings for the selected display model” box
- Click “Apply” in the bottom-right
If the above isn’t available, or isn’t working, you may need to go to
Manage 3D Settings, click the Global tab, scroll down to Monitor
Technology, select G-SYNC Compatible in the drop-down, and then click Apply
Even though AMD Radeon GPUs and some FreeSync monitors support
Adaptive Sync over HDMI, Nvidia says you’ll need to connect your GeForce GPU
to your FreeSync monitor using a DisplayPort cable to activate variable
refresh rates.(G-Sync monitors only work over DisplayPort as well.) Update:
If you have any questions or comments, please contact us below.
USA:cs@pixiogaming.com
JAPAN:support@pixiogaming.jp
www.pixiogaming.jp/support
For your warranty information, please visit
www.pixiogaming.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>