Bertazzoni REF18FCIPIXL23 Built In Freezer Column Instruction Manual
- June 11, 2024
- Bertazzoni
Table of Contents
Bertazzoni REF18FCIPIXL23 Built In Freezer Column
Product Information
The product is a refrigerator with the following dimensions:
- Side View: 22 1/16 inches (560 mm)
- Front View: 17 5/8 inches (447 mm)
- Door Width: 80 3/4 inches (2050 mm) + 1(25)
- Cutout Dimensions:
- Side View: aa
- Front View: *
- Top View: 2 1/2 inches (63 mm) x 17 15/16 inches (456 mm)
- Maximum Overall Handle Dimension: Top View – 25 inches (635 mm)
- The product requires a properly-grounded, horizontally-mounted electrical receptacle and a 1/4 NPT waterline with accessible shut-off valve for water connection.
- Anti-tipping brackets must be installed if the appliance is not connected through the side profile trims to secured cabinetry.
- A separate circuit breaker servicing only this appliance is recommended.
Product Usage Instructions
- Install a properly-grounded, horizontally-mounted electrical receptacle according to the drawing provided in the installation requirements section of the manual.
- Connect the product to a water supply system using a 1/4 NPT waterline with an accessible shut-off valve.
- If the appliance is not connected through the side profile trims to secured cabinetry, install anti-tipping brackets.
- Ensure that the product is connected to a separate circuit breaker servicing only this appliance.
Note : For installation of multiple products in combination, refer to the Built-in Food Preservation Design Guide.
PRODUCT DIMENSIONS
SIDE VIEW
FRONT VIEW
TOP VIEW
Maximum Overall Handle Dimension
CUTOUT DIMENSIONS
SIDE VIEW
FRONT VIEW
TOP VIEW
Area to be left clear for the anti-tipping brackets 3”1/2×5” (82x127mm)
ELECTRICAL & WATER CONNECTION
- TOP VIEW
- A properly-grounded, horizontally-mounted electrical receptacle should be installed according to this drawing
- A properly-grounded, horizontally-mounted electrical receptacle should be installed according to this drawing
- FRONT VIEW
- To connect to the water supply system, a 1/4” NPT waterline with accessible shut-off valve must be supplied.
- To connect to the water supply system, a 1/4” NPT waterline with accessible shut-off valve must be supplied.
Connection(s) placement within the opening may require additional cabinet depth.
A separate circuit breaker servicing only this appliance is recommended.
For installation of multiple products in combination, refer to the Built-in
Food Preservation Design Guide.
Dimensions in parentheses are millimeters unless otherwise specified.
INSTALLATION REQUIREMENTS
If the appliance(s) is not connected through the side profile trims to secured cabinetry anti-tip brackets must be installed.