BERTAZZONI WD60CONX-12 Built In Warming Drawer Instruction Manual
- June 1, 2024
- Bertazzoni
Table of Contents
WD60CONX-12 Built In Warming Drawer
“`html
Product Information
Specifications
-
Model: WD60CONX/12, WD60PROX/12
-
Power Data: Check characteristics plate for voltage and
frequency requirements -
Safety: Must be earthed for electrical safety
Product Usage Instructions
Appliance Description
The warming drawer is designed to keep food warm at the desired
temperature until ready to serve.
Main Components
The main components of the warming drawer include the heating
element, temperature controls, and a spacious drawer for keeping
food warm.
How the Warming Drawer Works
The warming drawer works by circulating heat evenly throughout
the drawer, maintaining a consistent temperature to keep food warm
without overcooking.
Installation
Ensure to compare the power data on the characteristics plate
with your power supply before installation. If unsure, consult an
electrician for help.
Combination Possibilities
The warming drawer can be installed as a standalone appliance or
combined with other built-in appliances for a seamless kitchen
setup.
FAQ
What should I do if the warming drawer doesn’t work?
If the warming drawer doesn’t work, check the power supply and
ensure proper installation. If issues persist, contact a qualified
technician for assistance.
How do I benefit from the guarantee?
To benefit from the guarantee, send off the warranty card and
keep the warming drawer receipt stamped and dated by the purchase
shop. This ensures your warranty remains valid.
“`
Instruction Manual
EN
WD60CONX/12 WD60PROX/12
EN
Contents
Appliance Description …………………………………………………………………………………………………………8 Main
Components …………………………………………………………………………………………………………….8 How the warming drawer
works…………………………………………………………………………………………..8
Use …………………………………………………………………………………………………………………………………….9 Before using for the
first time………………………………………………………………………………………………9 Control
Panel……………………………………………………………………………………………………………………9 Using the warming drawer
………………………………………………………………………………………………….9 Selecting the function
………………………………………………………………………………………………………..9
Cleaning and Maintenance…………………………………………………………………………………………………11 Appliance
front and control panel ………………………………………………………………………………………11 Interior of the
warming drawer …………………………………………………………………………………………..11 Mat with non-slip
surface ………………………………………………………………………………………………….11
What should I do if the warming drawer doesn’t work?……………………………………………………….12
Installation ……………………………………………………………………………………………………………………….. 13
Combination possibilities ………………………………………………………………………………………………….13
We ask you to read the instructions in this booklet very carefully as this
will allow you to get the best results from using your warming drawer.
KEEP THE DOCUMENTATION OF THIS PRODUCT FOR FUTURE REFERENCE.
ATTENTION! To benefit from our guarantee you must send off the warranty card
and, when requesting a service engineer call out, you must present the warming
drawer receipt, stamped and dated by the shop where you bought the appliance.
Failure to do this may lead to your warranty being invalid.
EN
Safety Instructions
Warning! Before connecting the appliance compare the power data (voltage and
frequency) indicated on the characteristics plate with those of the power
supply in question. If these data do not match there may be problems. In case
of doubt, contact an electrician.
Warning! If the electrical wire plug is removed, the appliance must be
installed and connected by a technician. Contact a qualified electrician who
knows and respects current safety standards. The manufacturer cannot be held
responsible for damage resulting from fitting or connecting errors.
Warning! The electrical safety of the appliance can only be guaranteed if it
is earthed. The manufacturer cannot be held responsible for damage resulting
from the absence of or defects in the installation’s protection system (e.g.
electrical shock).
Warning! Only use the appliance once it has been fitted into its built-in
position. Only in this manner can it be guaranteed that users cannot access
the electrical components.
Warning! Never open up the appliance’s frame. Possible contacts with
electrical conducting parts or changes to electrical or mechanical components
may represent a danger to users’ safety and prejudice the correct working of
the appliance.
Warning! Repairs and maintenance, especially of parts carrying electrical
current, must only be done by technicians authorised by the manufacturer. The
manufacturer and retailers do not accept responsibility for any damaged caused
to people, animals or property as a result of repairs and maintenance carried
out by nonauthorised personnel.
Warning! Repairs undertaken during the guarantee period must only be done by
technicians authorised by the manufacturer. If this is not the case then any
damage resulting from the repair in question is excluded from the guarantee.
Warning! The appliance must be disconnected from the electrical current when
installation and repair work is being done. To disconnect the appliance from
the current, one of the following conditions must apply:
– The switchboard fuses / circuit breakers must be disconnected.
– The plug should be removed from the socket. To remove the plug from the
socket do not pull on the electric cable but rather pull out the plug itself
directly.
EN
Safety Instructions
This appliance complies with current safety standards. Improper use of the
appliance may put the user at risk.
Read the operating instructions carefully before using the appliance for the
first time. In this way you will avoid the risk of injuring yourself or
damaging the appliance.
The warming drawer is solely for domestic use!
Use the warming drawer solely for warming crockery. Any other type of use is
unacceptable and may be dangerous. The manufacturer does not accept
responsibility for breakdowns or faults arising from improper or erroneous use
of the appliance.
Do not use the appliance to heat up or to cook food or drinks.
Depending on the temperature selected and the operating time, the temperature
inside the appliance may reach 80 ºC. To take crockery out of the warming
drawer protect your hands by using oven gloves or an oven cloth.
Take special care with children and do not allow them to play close to the
appliance. If the appliance is inadvertently switched on it will heat up and
may cause serious burns.
WARNING: The appliance and its accessible parts become hot during use.
Care should be taken to avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously supervised.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
EN
Precautions during use
Do not sit or hang on the drawer. The telescopic runners will be damaged. The
maximum load capacity of the drawer is 25 kg.
Do not store synthetic containers or easily inflammable objects inside the
warming drawer. When you switch on the appliance such containers and objects
may melt or catch fire. Fire danger.
Do not use the appliance to heat up the air temperature in the kitchen. The
high temperatures reached may cause easily inflammable objects close to the
appliance to catch fire.
Do not use high pressure or steam jet cleaning devices. The steam may affect
electrical components and cause a short circuit. The steam pressure may also
cause damage to the appliance’s surface and components in the long term.
When you stop using the appliance at the end of its working life, disconnect
it from the power supply and render the electrical cable unusable so that the
appliance is not a danger if, for example, children use it for playing.
EN
Installation instructions
Before installation
Check that the input voltage indicated on the characteristics plate is the
same as the voltage of the power outlet you are going to use.
Open the drawer and take out all the accessories and remove the packing
material.
Attention! The front surface of the crockery heater may be wrapped in a
protective film. Before using the warming drawer for the first time, remove
this film carefully.
Make sure that the warming drawer is not damaged in any way. Check that the
drawer opens and closes correctly. If you find any damage, contact the
Technical Assistance Service.
Attention: the power socket should be easily accessible after the warming
drawer has been installed.
The warming drawer should only be built-in in combination with those
appliances indicated by the manufacturer. If it is fitted in combination with
other appliances, the guarantee is no longer valid since it is impossible to
guarantee that the warming drawer will work correctly.
Installation
To build-in the warming drawer in combination with another appliance there
must be a fixed, interim shelf in the housing unit to support the weight of
both appliances.
The appliance to be combined with the warming drawer will be placed directly
on the latter without any need to have a separating shelf.
To build-in the appliance which is combined with the warming drawer, follow
the instructions set out in the respective instructions and fitting booklet.
The relevant installation dimensions are indicated in mm in the diagrams shown
at the end of this booklet. Proceed as follows:
1. Place the warming drawer on the shelf and slide it towards the interior of
the niche in such a way that it is centred and completely lined up with the
front of the unit.
2. Check that the warming drawer’s frame is properly levelled and is sitting
evenly on the shelf.
3. Open the drawer and fix the warming drawer to the sides of the unit using
the two screws provided.
Electrical Connection
The warming drawer is equipped with a power cable and plug for single phase
current. We advise that the plug is connected to a socket that is easily
accessible after installation. If the warming drawer is to be installed on a
permanent basis it should be installed by a qualified technician. In such a
case, the appliance should be connected to a circuit with an all-pole circuit
breaker with a minimum separation of 3 mm between contacts. The data necessary
for the electrical connection are described on the warming drawer’s
characteristics plate and these must be compatible with those of the power
outlet you are going to use. WARNING: THE WARMING DRAWER MUST BE CONNECTED TO
EARTH. The manufacturer and retailers do not accept responsibility for any
damage that may be caused to people, animals or property if these installation
instructions are not observed.
EN
Appliance Description
Main Components
1 Function selector 2 On/Off switch
3 Control Lamp 5 Anti-Slip mat
How the warming drawer works
This appliance is equipped with a warm air circulation system. A fan
distributes the heat generated by an electrical heating element throughout the
interior of the appliance.
The thermostat allows the user to define and control the temperature wanted
for the crockery.
The circulating hot air that is generated heats up the crockery quickly and
evenly.
A metal grille protects both the heating element and the fan.
The base of the drawer is fitted with a non-slip mat to prevent plates and
dishes sliding around when the drawer is opened and closed.
8
EN
Use
Before using for the first time
Before using the appliance for the first time you should clean the interior
and the exterior, following the cleaning instructions given in the section
“Cleaning and Maintenance”. Then heat the warming drawer for at least 2 hours.
For this, turn the temperature control to the maximum position (see section
`Selecting temperature”). Make sure the kitchen is well-ventilated when you
are doing this. The appliance’s parts are protected by a special product. For
this reason, during the first heating an odour will be released. Both the
odour and any smoke that may form will disappear after a short time and
neither signifies that there is anything wrong with the connection or the
appliance.
Control Panel
The control panel has a temperature selector and the on/off switch. The
control panel is only visible when the drawer is open. When the drawer is
closed you can check whether the warming drawer is switched on by looking
through the viewing port on the front of the appliance.
Using the warming drawer
To use the warming drawer, proceed as follows:
Put the crockery in the drawer.
Select the temperature you want by turning the thermostat control to the
desired position.
Switch on the appliance by pressing the switch, which will light up.
Close the drawer.
Be careful not to use too much force when closing the drawer since it may open
up again.
Before taking out the warm crockery you must switch off the warming drawer by
pressing the switch again.
Selecting the function
By turning the thermostat control you can select temperatures between 30 and
80 °C.
Do not force the thermostat control to the left of the “0” position or to the
right of the maximum position since this may damage the appliance.
As soon as the temperature selected is reached, the heating is turned off.
When the temperature drops to a value below that selected, the heating is
turned back on.
The temperature scale is not marked with absolute temperatures in ºC but
instead has symbols which correspond to the optimum temperatures for groups of
crockery:
Symbol ºC
Function
30ºC Defrosting
40ºC- Proving dough 50ºC Cups / glasses warming
60ºC- Crockery warming 70ºC Keep food warm
80ºC
Low temperature cooking Food Warming
9
EN
Use
Selecting function
Heating times
Various factors affect heating times: Material and thickness of the crockery; Load quantity; How the crockery is arranged; Temperature setting.
It is therefore not possible to give any precise
heating times.
However, as a guide, the following times are
given for the thermostat setting
and for
uniform heating of the crockery:
Load Crockery for 6
people
Time (min) 30 35
As you use the warming drawer more and more you will learn the best settings for your crockery.
Suggestions for the function Keep Food Warm and Food Warming:
Preheat the Warming Drawer 15 minutes to ensure the interior space has the required temperature.
Load capacity
Load capacity depends on the size of the items of crockery. The crockery
warmer can be loaded with a maximum of 25 kg.
Below we give you some crockery arrangements as examples: Crockery for 6
people:
– 6 dinner plates Ø 28 cm
– 6 soup bowls Ø 10cm
– 1 dish Ø 22 cm
– 1 dish Ø 19 cm
– 1 dish Ø 17 cm
– 2 large plates Ø 36 cm
or one of the following 20 dinner plates Ø 28 cm 36 soup bowls Ø 22 cm 30 soup
bowls Ø 10cm 10 dinner plates Ø 28cm 10 soup bowls Ø 22 cm 10 pizza plates Ø
36 cm 80 expresso cups 40 cappuccino cups 30 glasses 18 soup bowls Ø 22 cm; 2
soup tureens 21 cm
x 18 cm Etc.
10
EN
Cleaning and Maintenance
Cleaning is the only maintenance action that is required normally.
Warning! Cleaning must be done with the warming drawer disconnected from the
electrical power supply. Remove the plug from the power socket or disconnect
the warming drawer power supply circuit.
Do not use aggressive or abrasive cleaning products, abrasive sponges or
pointed objects since stains or abrasion marks may appear.
Do not use high pressure or steam jet cleaning appliances.
Appliance front and control panel
The warming drawer can be cleaned using just a damp cloth. If it is very
dirty, add a few drops of washing-up liquid to the washing water.
Wipe the surfaces dry using a dry cloth.
For stainless steel fronted warming drawers, special products for treatment of
stainless steel surfaces can be used. These products prevent the surfaces
becoming dirty again for some time. Apply a thin layer of such a product on
the surface using a soft cloth.
On aluminium fronted warming drawers use a gentle glass cleaning product and a
soft cloth that does not release fluff. Wipe horizontally without pressing on
the surface since aluminium is sensitive to scratches and cuts.
Interior of the warming drawer
Clean the inside of the warming drawer regularly using a damp cloth. If it is
very dirty add a few drops of washing-up liquid to the washing water.
Wipe the surfaces dry using a dry cloth.
Avoid water entering through the air circulation opening.
Only use the warming drawer again when it is completely dry.
Mat with non-slip surface
The non-slip surface mat can be removed to facilitate cleaning of the drawer.
The mat can be cleaned by hand using hot water with a few drops of washing-up
liquid.
Dry thoroughly.
The non-slip mat should only be replaced when it is completely dry.
11
EN
What should I do if the warming drawer doesn’t work?
WARNING! Any type of repair must only be done by a specialised technician. Any
repair done by a person not authorised by the manufacturer is dangerous.
Before contacting Technical Assistance, check on the following:
The crockery doesn’t heat up enough. Check whether:
– The appliance has been switched on.
– The appropriate temperature has been selected.
– The air circulation orifices are covered by the crockery.
– The crockery was left to heat up for sufficient time.
Heating time depends on several factors, such as, for example:
– Crockery material type and thickness.
– Quantity of crockery.
– How the crockery is arranged.
The crockery doesn’t heat up at all. Check whether: – You can hear the noise
of a fan. If the fan is operating then the heating element is broken; if the
fan is not operating then the fan is broken. – The switchboard fuses / circuit
breakers have fused / tripped out.
The crockery is heating up too much. – The temperature selector is broken.
The on/off switch does not light up. – The switch’s pilot light has blown.
12
Installation
Combination possibilities
WD60CONX/12 WD60PROX/12
13
Cód:943448
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>