ET2 Contemporary Lighting E24225 Pierce 5 Light LED Pendant Installation Guide

ET2 Contemporary Lighting E24225 Pierce 5 Light LED Pendant

Product Information

The LED lighting product operates on DC power and requires assembly before use. The product comes with packaging materials that should be carefully removed and retained for future use. It is recommended to assemble the product in a clean, level, spacious area that is away from hard surfaces that may damage the product. Once assembled, the product should be positioned where it is intended to be used. The product should not be over-tightened during assembly to avoid damaging the threads.

Lamp Care Instructions
Before assembling and using the product, read through the instruction sheet carefully. There is a risk of shock, so ensure that the product is disconnected from the power source before assembling or cleaning. Only use the recommended bulb type and do not exceed the maximum wattage to avoid causing a fire hazard. Do not plug in the product if the cord is torn or frayed.

Cleaning & Maintenance
To clean and maintain the lamp, use a soft cloth and mild detergent. Do not use abrasive cleaners. On polished finishes, talc powder can be used to reduce fingerprints and smudges. For respective shade surfaces, use appropriate cleansers such as glass cleaner, acrylic polish, and wood polish. Periodically check that all screws are fully tightened every 90 days to ensure the proper functioning of the product. Prolonged exposure to heat sources may cause glazing, melting, or scorching and may even cause the color to fade.

Product Usage Instructions

1. Read through the instruction sheet carefully before assembling and using the product.
2. Choose a clean, level, spacious assembly area and ensure you have all the required contents for complete assembly.
3. Remove all packaging materials carefully and retain them for future use.
4. Position the product where it is intended to be used.
5. Ensure that the product is disconnected from the power source before assembling or cleaning.
6. Use only the recommended bulb type and do not exceed the maximum wattage.
7. Do not plug in the product if the cord is torn or frayed.
8. Clean and maintain the product using a soft cloth and mild detergent, avoiding abrasive cleaners. Use appropriate cleansers for respective shade surfaces.
9. Periodically check that all screws are fully tightened every 90 days to ensure the proper functioning of the product.

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain them for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all the required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
• Do not over-tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock. Disconnect from the power source before assembling or cleaning.
• WARNING: Wires need to be connected to the driver found in the canopy and should not be connected directly to a power source or a short may occur.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Do not plug the product in if the cord is torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
• Clean with a soft cloth and a mild detergent. Do not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause color to fade.

Package Contents

Before getting, started, ensure the package contains the following components:

Installation Instruction

CRITICAL INSTRUCTION

This fixture must be installed with compatible dimmer types only. Improper wiring of fixtures and/or use of incorrect dimmers will cause catastrophic failure and void the warranty.

DO NOT ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE, MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER WILL VOID THE WARRANTY.

FOR OPTIMAL USE
THIS FIXTURE HAS BEEN TESTED TO WORK WITH THE BELOW DIMMERS

Lutron Diva

• DVCL-153P
• DVELV-300P

IMPORTANT
Make sure that your dimmable LED fixture is paired with the correct dimmer type.

Must be installed by a licensed electrician with knowledge of electronic lighting systems.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>