Simplecom NW811v2 AX1800 Dual Band WiFi 6 USB Adapter Installation Guide
- June 11, 2024
- Simplecom
Table of Contents
Simplecom NW811v2 AX1800 Dual Band WiFi 6 USB Adapter
Features
- New generation WiFi 6 USB adapter for PC and Laptop
- AX1800 supports up to 574Mbps at 2.4GHz and 1201 Mbps at 5GHz
- Supports MU-MIMO for efficient connection in high-density environments
- Supports WPA3 to provide enhanced network security against attacks
- Dual adjustable SdBi antenna and USB extension cradle ensures strong WiFisignal
- Beamforming improves WiFi signal strength and range
- Backward compatible with previous standard WiFi routers
- Ideal for HD streaming, online gaming, and downloading
- Easy and automatic installation with built-in driver
- Support Windows 10 and above operating systems
Specifications
- Model: NW811 v2
- Interface: USB 3.2 Gen 1 (USB 3.0)
- WiFi Protocol: IEEE 802.11 a/b/g, WiFi 4 (802.11 n), WiFi 5 (802.1 lac), WiFi 6 (802 11 ax)
- WiFI Rate: up to 574Mbps (2.4GHz 802.1 laxJ, 1201 Mbps (5GHz 802.11 ax), 867Mbps (5GHz 802.11 ac)
- Antenna Type: 2x SdBi adjustable high gain antennas
- Wireless Encryption: WPA2, WPA3
- Wireless Frequency: Dual-band 2.4GHz & 5GHz
- Operating Temperature: o – 40°C
- Operating Humidity: 10% – 90% non-condensing
- System Requirements: Windows 1 O and above
Driver Installation (Windows)
Note: This WiFi adapter supports Windows only, macOS and other systems are not supported.
- While plugging this adapter to your computer first time, the installation program will be launched automatically from Virtual CD Drive if AutoRun is enabled on your PC. Then click “lnstall”to finish the driver installation.
- If AutoRun is disabled on your PC, or blocked by the security software, you can manually open the Virtual CD Drive to install the driver. You’ll see there is a Virtual CD Drive “Realtek” under ‘7his PC”on Windows 10 or 11, which contains the driver software for the adapter. You can launch installation by double clicking “WiliAutolnstal/Setup.exe’!
- The virtual CD Drive will disappear after the driver is installed.
Note: Only Windows 1 O and 11 are supported, you can also check the latest driver from our website www.simplecom.com.au, search the model number NWB11v2, then open the product page, driver files are located under the DOWNLOAD tab on the product page.
Connect to WiFi
- Click the network icon in the system tray.
- Select the Wi-Fi SSID you want to connect.
- Check the “Connect automatically” option and click the “Connect”.
- Enter the network security key (password), then click “Next”.
Once you complete the steps, the PC will connect to the network using the wireless connection.
Windows Device Manager
- To open Device Manager on Windows 10 or 11, in the search box on the taskbar, type “Device Manager”, then select from the menu.
- Expand the “Network adapters” section. On a successful install, you should see the following device in the list
- Please note driver only can be installed from auto installation program, the USB Wi-Fi adapter will not be recognized or listed with exclamation and question marks under Device Manager before installing the driver.
Warranty
1-Year Limited Warranty. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For our assistance with regards to warranty please email to support@simplecom.com.au or create a support ticket at http://www.simplecom.com.au
© Simplecom Australia All Rights Reserved. Simplecom is a registered trademark of Simplecom Australia Pty Ltd. All other trademarks are the property of their respective owner. Specifications and external appearance are subject to change without notice. Warranty and technical support covering this product are only valid in the country or region of purchase.
www.simplecom.com.au ~ support@simplecom.com.au