FLASH P7200042 LED Washer 12X30W White User Manual
- June 4, 2024
- FLASH
Table of Contents
FLASH P7200042 LED Washer 12X30W White
INTRODUCTION
Thank you for purchasing LED WASHER 12X30W WHITE. For safety reasons and to ensure the trouble-free operation, carefully read the instructions.
SAFETY INFORMATION
- Installation should be done by qualified personnel in order to minimize the risk of accidental electric shock
- Disconnect the power supply before installation.
- Before connecting the unit to the mains, make sure it is not damaged mechanically. If you notice any signs of damage you should contact your dealer immediately. Do not connect the device to the mains.
- Do not use the device in high humidity conditions and at temperatures above 40° C
- The device must be installed on stable structures
- Always use steel security cable to attach the device to a stable structure
- Do not connect power supply to more than 4 devices in series.
PRODUCT INFORMATION
Features
- 12 sections controlled separately by DMX
- 16-bit dimming resolution
- Various dimming curves for smooth dimming in 8-bit mode
- Dim delay (light bulb simulation)
- Full DMX signal regeneration
- Electronic protection against overheating
- THEATRE or DISCO cooling volume modes.
- Permanent color correction
- Native support for optional wireless DMX module
Specification
- Power consumption: 400W
- Power supply voltage: 100 – 245V
- Voltage frequency: 50/60Hz
- Fuse: F7AL
- Diode type: COB
- Number of diodes: 12
- Diode power: 30W
- Display: Color LCD
- Color: 4xWhite (2000K, 3000K, 4000K, 9000K)
- Beam angle: 50°
- Dimming: Linear: 0 – 100%
- Flash frequency (min): 1Hz
- Flash frequency (max): 20Hz
- DMX standard: DMX 512
- Control interface: 4 buttons
- Operating modes: DMX512, Auto, Sound-controlled, Master / Slave
- Features: 16-bit dimming, various dimming curves, bulb simulation, DMX Signal regeneration, Electronic protection against overheating
- AC IN: powerCON
- AC OUT: powerCON
- DMX IN: XLR – 3 pin
- DMX OUT: XLR – 3 pin
- IP Rating: IP20
- Housing made: Aluminum
- Cooling: Active
- Height [cm]: 8
- Width [cm]: 97
- Depth [cm]: 19
- Weight [kg]: 5
INSTALLATION
After removing the packaging, check if the device was not damaged during
transport. Before connecting to the mains, make sure that the device is
securely mounted. The manufacturer is not responsible for damage caused by
unstable mounting.
CAUTION! Always use steel security cable to attach the device to a stable
structure.
Ensure proper connection to the mains and proper grounding. Make sure that the
electrical parameters are consistent with device requirements. All activities,
including connecting the device to the mains must be performed by qualified
personnel.
CONNECTIONS
The device is equipped with the following interfaces:
- DMX (in/out): XLR 3-pin socket
- Power (in/out): powerCON socket
Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male
plugs.
Voltage specification
| Input Voltage | Total Power | Frequency |
|---|---|---|
| 100~245V | 400W | 50/60Hz |
Connecting power supply
The connection is performed using power cable with PowerCon connector
(included).
The device must be operated by qualified personnel. Make sure that the power
grid supply parameters are consistent with device parameters and limitations
are not exceeded.
CAUTION! In the case of cable damage do not attempt to repair.
Replacement or repair can be made only on the manufacturer or by a person with
appropriate permissions.
Maximum number of devices connected in series: 4
OPERATION MANUAL
Control panel
The control panel is equipped with LCD display and 4 control buttons with the
following functions:
- ESC – go back from the selected options, go to upper menu, cancel changes
- DOWN – choose option, edit parameter
- UP – choose option, edit parameter
- ENTER edit selected option, confirm changes
DMX
Value
|
MACRO/COLOR
|
SPEED channel function
---|---|---
0-5| no function| no function
6-10| Color 1|
0=no function; 1-255 pulse speed
11-15| Color 2
16-20| Color 3
21-25| Color 4
26-30| Color 5
31-35| Color 6
36-40| Color 7
41-45| Color 8
46-50| Color 9
51-55| Color 10
56-60| Color 11
61-65| Color 12
66-70| Color 13
71-75| Color 14
76-80| Color 15
81-85| Color 16
86-90| Color 17
91-95| Color 18
96-100| Color 19
101-105| Color 20
106-110| Color 21
111-115| Color 22
116-120| Color 23
121-125| Color 24
126-130| Macro 1|
macro speed; slow to fast
131-135| Macro 2
136-140| Macro 3
141-145| Macro 4
146-150| Macro 5
151-155| Macro 6
156-160| Macro 7
161-165| Macro 8
166-170| Macro 9
171-175| Macro 10
176-180| Macro 11
181-185| Multi-section macro 1: chaser forward
186-190| Multi-section macro 2: chaser backward
191-195| Multi-section macro 3: chaser smooth forward
196-200| Multi-section macro 4: chaser smooth backward
201-205| Multi-section macro 5: 21/12
206-210| Multi-section macro 6: 21/12 smooth|
---|---|---
211-215| Multi-section macro 7: in-out forward
216-220| Multi-section macro 8: in-out backward
221-225| Multi-section macro 9: in-out smooth forward
226-230| Multi-section macro 10: in-out smooth bacward
231-235| Multi-section macro 11: rainbow
236-240| Sound mode 1|
no function
241-245| Sound mode 2
246-250| Sound mode 3
251-255| Sound mode 4
DMX
Value
|
STROBE
---|---
0-10| no function
11-255| Strobe, slow to fast
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>