BLAUPUNKT PW4010 Pressure Washer Instruction Manual

BLAUPUNKT PW4010 Pressure Washer Instruction Manual

IMPORTANT INFORMATION

To achieve the highest satisfaction, enjoy the product’s performance and learn about all its features and functions, please read this manual before using the product.
Before using the device, read the Operating Instructions and comply to its contents. The manufacturer shall not be liable for any damage caused by the use of the device other than for its intended purpose or by improper handling.
Keep these Operating Instructions for future reference.

• This device is for domestic use only. Do not use for any other purposes.
• The device should only be connected to an socket with values corresponding to the values on the rating label.
• It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
• If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
• Do not let cord hang over edge of counter, or touch any hot surface.
• The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
• Before maintenance work always disconnect the unit from the power supply.
• When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard.
• Never leave the product connected to the power source without supervision.
• Never put the power cable, the plug or the whole device into the water or any other liquids.
• The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
• Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
• This equipment can be used by children aged 8 years and over under as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment. Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
• Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
• Never use the product close to combustibles.
• Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
• The power cable should be periodically checked for damage. If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
• Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it.  All the repairs should only be performed by authorized service professionals. Any attempted unauthorised repairs performed can be a hazard to the user.
• Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
• Keep your workplace tidy and well lit.
• Disorder and insufficient lighting lead to accidents.
• Do not use power tools in explosive atmospheres, i.e. in the presence of flammable liquids, gases or dust.
• A moment of carelessness may cause losing control of your tool.
• If it is possible to fit power tools for dust extraction or collection, check that they are fitted and working correctly. Using such power tools reduces the risk posed by the presence of dust.
• Do not lean out too far when working with your power tool. Maintain a stable posture and balance. This allows you to keep better control of your power tool in unforeseen situations.
• Avoid starting the power tool unintentionally. Make sure the power switch is in the OFF position before connecting the power tool to the mains. Carrying a power tool with your finger on its trigger or plugging in a power tool after switching it on can lead to accidents.
• Wear appropriate clothing. Do not work in loose clothing and do not wear jewellery while working. Keep your hair, clothing and gloves away from moving parts. The moving parts of a power tool can catch and pull in loose pieces of clothing, jewellery or long hair.
• Remove any spanners or tools from the power tool before starting it. A tool or spanner still connected to the rotating part of the power tool\ may cause personal injury.
• Be careful when working with power tools, concentrate on your work and use common sense. Do not use a power tool when tired or under the influence of drugs, alcohol or medication. Even a moment of carelessness while working with a power tool can lead to a serious accident.
• Keep children away from the work area and DO NOT allow children to pull on the power cord – this can cause serious injury.
• Always place and use the power tool on a stable, level and horizontal surface.
• Before making any adjustments, changing accessories or storing the power tool, move the switch to the off position to disconnect the power tool from the power supply. Such precautions reduce the risk of accidentally starting the power tool.
• Check the grinder housing for damage before each use.
• Ensure that the vents are free from debris.
• The device may only be used in a dry, well-lit environment.
• This tool should not be used by anyone under the age of 16.
• Never use the tool if its cable is damaged; have it replaced by a qualified person.
• Do not process materials containing asbestos (asbestos is considered a carcinogen).
• Always disconnect the plug from the power source before adjusting or changing accessories.
• The noise level during operation may exceed 85 dB (A); wear hearing protection.
• High-pressure water jet should not be directed towards people or animals.
• Protect the unit from frost and running without water (“dry”).
• High-pressure hoses, fittings and couplings are important machine safety components. Use only the manufacturer’s recommended high-pressure hoses, fittings and couplings.
• The high-pressure hose may leak as a result of wear, misuse, kinks, etc. Do not use a damaged hose.
• Do not use the pressure washer near flammable materials.
• Some chemicals or detergents can be harmful if inhaled or ingested.
• Use a mask whenever fumes are likely to occur.
• Before operating the pressure washer at low temperatures, check that all parts of the unit are not frozen. Do not store the unit where the temperature will drop below 00C (320F).
• Keep the high-pressure hose connected to the pressure washer when the system is under pressure; disconnecting the hose while the unit is running is dangerous and may cause injury.
• Never run the pressure washer without water supply. Operating the unit without water supply will cause irreparable damage.
• Warning: Do not connect the appliance to contaminated water sources.
• Make sure that the water source used for the pressure washer is clean and not contaminated with sand or corrosive chemicals. The use of contaminated water leads to a build-up of sand in the washer and possible damage to the unit.
• The high-pressure water jet can damage the work surface if not used correctly!
• Do not move the unit by pulling by the high-pressure hose.\ Use the handle located on top of the unit.
• Always hold the high-pressure gun with both hands.

Intended use
Use the high-pressure washer for domestic work only.

• For cleaning machinery, vehicles, buildings, tools, patios, garden equipment, etc.
• The rotary brush is used for washing patios; do not wash painted surfaces.

SYMBOLS

• The manual or rating plate on your tool may show symbols.
• These represent important information about the product or instructions on its use.

| Read the user manual.| | Wear protective footwear
---|---|---|---
| The product complies with EC safety standards| | Use ear protection
| General warning| | Wear protective gloves
| Dispose of the product in accordance with the WEEE directive| | Wear protective clothing
| The product has double electrical insulation| | Wear a protective mask
| Fire hazard| | Wear safety glasses
| Electric shock hazard| | Wear a protective helmet
| | Wear respiratory protection

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance in the common waste bin.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

USE PERSONAL PROTECTIVE EQUIPMENT

• Wear safety glasses according to En166
• Use protective masks in accordance with En149
• Use other precision personal protective equipment, depending on the type of work involved.

1. Grip
2. Gun grip
3. Gun trigger
4. High-pressure hose holder
5. High-pressure hose
6. Gun holder
7. Gun tip
8. Water outlet pipe
9. Coupler
10. Power cable holder
11. Water supply pipe
12. Adjustable nozzle
13. Water inlet connector
14. Nozzle cleaning needle
15. Bolts
16. Bottle of detergent

Handle installation:

1. Place the handle as shown in the figure.
2. Screw the bolts into the designated place shown in the figure

Installation of a high-pressure hose holder:

Screw the bracket in place at the designated points, as shown in the figure.

Installation of the gun holder and power cable holder.
Insert the gun holder as shown in the figure.
Push the power cord holder onto the unit and tighten the four screws.

Fitting a high-pressure hose to the water pipe:
Press down and turn (clockwise).

Starting up

1. Open the water valve. Press the trigger for approximately 1 minute until full pressure is reached (so as to bleed the unit).
   Warning: This unit is designed for use with cold water only! Do not use hot water.

2. Set the pressure washer switch to the “ON/I” position and then press the trigger.
   Note: Make sure the lock switch is in the ‘unlocked’ position before pressing  thetrigger.
   Warning: Do not start the unit without the water connected and its valve opened, as this may damage the pump.

3. Then select the appropriate nozzle.
   Press the trigger, a high-pressure jet of water will flow out.
   An adjustable nozzle allows the spray shape to be changed.
   Warning: A high-pressure jet can be dangerous if used incorrectly. The jet must not be directed at persons, live electrical equipment.
   Warning: The spray gun must be switched off when changing nozzles.

4. Then connect the pressure washer to an electrical outlet.

5. Cleaning
   Start by washing the nozzle about 50 cm away from the surface, then approach carefully until the desired position is reached. Washing too close may damage the surface.

6. When cleaning is complete, release the drain and set the switch to the “OFF/O” position, then close the water supply.
   Caution: using the pressure washer after the water supply has been cut off can cause serious damage to the equipment.

7. The unit must be disconnected from mains when finished working.

Information on use:

1. Safety valve
   The safety valve is also a pressure limiting valve. When the trigger of the gun is released, the valve opens, and the unit switches off automatically.

2. When dispensing detergent with a pressure washer, only apply it to the area to be cleaned at low pressure. After applying the detergent, spray the detergent from the work area using the adjustable nozzle.

3. When cleaning jet-painted surfaces, maintain a distance of at least 40 cm to avoid damage to the paintwork.

Cleaning the water inlet filter
Water filter has been installed inside the water inlet connector, and requires periodic cleaning. Rinse it with clean tap water and then put it back in the water connecto

Nozzle cleaning
With the nozzle tip cleaning tool insert the device into the nozzle opening and remove the contamination.

Cleaning the ventilation openings of the unit
Keep the unit clean so that cooling air can flow freely through the vents.

Technical data:
Power supply: 230-240V/50Hz
Power: 1600 W
Rated pressure: 90 bar
Maximum pressure: 135 bar
Nominal flow rate: 330 l/h
Maximum water temperature: 40 ⁰C

Noise and vibrations.
The noise and vibrations have been measured in accordance with EN ISO 3744,EN 60335-2-79,Annex CC
Noise emission: Sound pressure level (LpA): 86.90 dB (A)
KpA deviation: 3.00 dB (A)
Measured sound power level LwA: 89.70 dB (A)
KwA deviation: 3.00 dB (A)
Guaranteed sound power level: LwA: 93.00 dB (A)

Total vibration value and measurement uncertainty (K)= 1.50 m/s²
The value of vibrations acting on the upper limbs: 2.56 m/s² , k= 1.50 m/s²
The declared total vibration value has been measured according to the standard testmethod and can be used to compare
one device to another. The given vibration emission value may be used for the preliminary estimation of the negative impact.

After every 15 minutes of work allow 15 minutes break.

EU – DECLARATION OF CONFORMITY

01/2023/PW4010
MANUFACTURER:

BLAUPUNKT COMPETENCE CENTER
2N-Everpol Sp. z o.o.
ul. Putawska 403A
02-801 Warsaw, Poland

Authorized person to prepare the technical documentation:
Tomasz Jakobczyk
ul. Puiawska 403A
02-801 Warsaw, Poland

We declare under our sole responsibility that our product:
Type of device: Pressure washer
Name: PW4010

If used for its intended use complies with the essential protection requirements relating to the:

2014/30/EU (EMC Directive)
2014/35/EU (LVD Directive)
2006/42/EC (MD Machinery Directive)
2011/65/EU (RoHS Directive) and its Annex II amending directive 2015/863/EU

The assessment of this product has been based on the following standards:

EMC standards:
EN 55014-1:2017+A11:2020 I EN IEC 55014-1:2021
EN 55014-2:1997+A1:2001+A2:2008 I EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3: 2013+A1:2019+A2:2021
EN IEC 61000-3-11:2019

MD and LVD standards:
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019+A15:2021 EN 60663-2-79: 2012 EN 62233:2008

RoHS standards:
IEC EN 63000:2018

Warsaw, 14.02.2023

Competence Center
2N-Everpol Sp. z o.o.
ul. Pulawska 403A
02-801 Warsaw, Poland
phone: +48 22 688 08 00
e-mail: [email protected]
www.blaupunkt.com

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Blaupunkt Competence Center
2N-Everpol Sp. z o.o.
Registered office:
Putawska 403A 02-801 Warsaw, Poland
Corespondence address:
Putawska 12 05-532 Baniocha, Poland Phone +48 22 688 08 00

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>