Alecto Smart-PLUG10 Smart Wi-Fi Plug User Guide
- June 11, 2024
- Alecto
Table of Contents
Alecto Smart-PLUG10 Smart Wi-Fi Plug
Product Information
SMART-PLUG10
The SMART-PLUG10 is a wireless device that can be controlled through the Smart Life app. It operates on a wireless communication protocol and has maximum transmitted power. The device has a maximum load and standby power that should be taken into consideration while using it.
Product Usage Instructions
- Download the Smart Life app.
- Watch the video on adding the SMART-PLUG to the app.
- Put the device in register mode.
- Hold the device 10 seconds until it flashes twice per second.
- Hold the device for 5 seconds until it flashes once per second.
- If the device does not confirm on the app, repeat step 5.
- Confirm on the app that the device is flashing twice per second.
- Ensure that the device is connected to the same Wi-Fi as your smartphone or tablet.
- The device will either be added successfully or fail to add. If it fails, retry or check help.
- Make sure the SMART-PLUG10 is within range of the router during registration. Keep it away from liquids and moisture.
Specifications
- Frequency:
- Wireless RF mode frequency band:
- Wireless communication protocol:
- Dimensions:
- Operating temperature:
- Storage temperature:
- Relative humidity:
- Maximum transmitted power:
- Voltage:
- Max. current:
- Max. load:
- Standby power:
HOW TO USE
REGISTER
PUT THE DEVICE IN REGISTER MODE
SPECIFICATIONS
- Frequency : 50/60 Hz
- Wireless RF mode frequency band: 2412-2472 MHz
- Wireless communication protocol: 2412-2472 MHz
- Dimensions: 84x50x50 mm
- Operating temperature: 5°C ~ 45°C
- Storage temperature: -10°C ~ 60°C
- Relative humidity: <60%
- Maximum transmitted power: 16.7 dBm
- Voltage: 220-240VAC
- Max. current: 16A
- Max. load: 3680W
- Standby power: <0.5 W
DECLARATION OF CONFORMITY
- Hereby, Commaxx declares that the radio equipment type Alecto SMARTPLUG10 is in compliance with directive 2014/53/EU.
- The full text of the EU declaration of Conformity is available at the following internet address: http://DOC.hesdo.com/SMART-PLUG10-DOC.pdf
ATTENTION!
- Make sure that the SMART-PLUG10 is within range of the router during the registration process.
- Keep away from liquids and humidity.
QR code
- Commaxx B.V.
- Wiebachstraat 37 6466NG Kerkrade
- The Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>