HYCO L218 Wireless Indicator Owner’s Manual
- June 11, 2024
- hyco
Table of Contents
HYCO L218 Wireless Indicator
Product Information: L218 Wireless Indicator
- Features: Easy to use, light and thin design, embedded support
- Advantages: Enhances corporate image, low-power consumption, simple usage and flexible application, energy-saving
- Specifications:
- Mechanical button and buzzer
- E-ink screen, barcode tag, and DC charging port (2.13 inch)
- Embedded support
- LED indicator
- Communication installation
- Battery (replaceable)
- Charging time: N/A
- Battery life: N/A
- Display: N/A
- Extended storage: N/A
- Recharging: N/A
- Operating temperature: N/A
- Humidity: N/A
- Model: L218
- Weight: N/A
- Dimensions (WDH): N/A
- Contact Information:
- Email: [email protected]
- Website: www.hycoiot.com
Product Usage Instructions:
The L218 Wireless Indicator is an easy-to-use device that features embedded support and is designed to enhance corporate image while being energy-saving with low-power consumption. Follow the instructions below to use this device:
- Locate the mechanical button and buzzer on the device.
- Connect the device to a power source using the DC charging port.
- Place the device in a location with embedded support.
- Turn on the device and wait for it to connect to the communication installation.
- Use the device as needed based on its intended purpose.
- Replace the battery as needed.
Note:
Please refer to the user manual for further details on the L218 Wireless
Indicator’s specifications, operating temperature, humidity, weight, and
dimensions.
Features
Advantages
- Enhance corporate image
- Low-power Consumption
- Simple Usage & Flexible Application
- Energy Saving
Specifications
| Model | L218 |
|---|---|
| Weight | <45g |
| Dimensions (WDH) | 86mm47mm12.8mm(without embedded support) |
89.3mm48.6mm14.6mm (with embedded support)
LED Indicator| RGB LED (programmable)
Mechanical Button
| The inclusion of a mechanical button that responds to both short and long presses enables the device to perform various interactive functions. This feature enhances the system’s usability and simplifies its
management.
Buzzer| Supported
Communication| GFSK@433MHz Wireless
Installation| Embedded support
Battery (Replaceable)| 1000mAh 2.5mm DC
Charging Time| 2.5 hours
Battery Life| 12 months
Display| 2.13-inch e-ink screen (122*250 Resolution)
Extended Storage| 1-8MByte
Recharging| With centralized charger (supports charging 10
devices at the same time)
℃ ℃ ℉ ℉
Operating Temperature| -10| to 50| (14| to 122| )
Humidity| 0%-80%RH (noncondensing)
Applications
[email protected]
www.hycoiot.com