JLAB Work Buds Wireless Over-Ear Headset User Manual

JLAB Work Buds Wireless Over-Ear Headset

YOUR WARRANTY

All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US

Reach out to us at support@jlab.com or visit jlab.com/contact

PAIR UP

1. Take earbuds out of dock and remove stickers.
   Place earbuds back in charging dock and plug in.
   

2. Blue lights on case indicates charging.
   Remove earbuds from case.

3. One earbud will blink blue/white indicating ready to pair to your device.
   Select “JLab Work Buds” in your device’s Bluetooth settings.
   

PICK A SIDE

Swap boom mic into either earbud.

FIND YOUR FIT

1. Place in ear and rotate for best fit.

2. Bend boom mic towards mouth for clear audio.

3. Try all the Cush Fins and ear tip options for best fit and proper seal.

ANY WHICH WAY

Leave mic ready between calls or fold up for travel. Flip dock to secure earbuds for travel.

GO AHEAD, PRESS THE BUTTON

VOLUME DOWN : 1x Tap
SIRI (iOS) or “OK GOOGLE” (ANDROID) : 2x Tap
CHANGE EQ : 3x Tap (cycles EQ settings)
MUSIC / MOVIE MODE : Press & hold 1+ sec
ANSWER CALL : 1x Tap
HANGUP CALL : Press & hold 1+ sec
REJECT INCOMING CALL : Press & hold 1+ sec

VOLUME UP : 1x Tap
PLAY / PAUSE : 2x Tap
BE AWARE : 3x Tap (cycles 2 sound settings)
TRACK FORWARD : Press & hold 1+ sec
ANSWER CALL : 1x Tap
HANGUP CALL : Press & hold 1+ sec
REJECT INCOMING CALL : Press & hold 1+ sec

GET CHARGED (EARBUDS)

Placing in the charging dock will auto power OFF and start charging. Earbuds LEDs will pulse blue when charging and will turn OFF when fully charged.
Removing the earbuds will auto power ON and connect to last device. To turn off without case, disconnect Bluetooth from device.
Earbuds will power off after 3 minutes.

GET CHARGED (DOCK)

Connect the JLab Work Buds to computer or USB 5V 1A (or less) output device.

MULTIPOINT (connect 2 devices simultaneously)

1. Once FIRST device is connected, turn off Bluetooth in device settings. Earbuds will auto enter Bluetooth Pairing.
   

2. Enter your SECOND device Bluetooth settings and connect to JLab Work Buds.
   

3. Enter your FIRST device Bluetooth settings. Turn on Bluetooth and connect to JLab Work Buds.
   

THE RIGHT SOUND FOR EVERY MOMENT

We get it, sound is personal. Choose your sound preferences from our EQ3 settings and customize your sound style to match exactly what you’re doing.

EQUALIZER MODES

JLab SIGNATURE
JLab C3™ signature sound with amplified vocals and bass

BEST FOR Best option for most music Pop, rock, country, electronic and more

BALANCED
Even sound with no additional enhancements

BEST FOR Podcasts, Audiobooks Classical music

BASS BOOST
Amplified bass and sub-bass

BEST FOR Working out, sport and fitness Hip hop, rap, electronic

“CUSTOM”
Custom EQ setting

(download the JLab Sound App to customize).

QUICK TIPS

• Either earbud can connect to your device and be used independently. Simply take out the earbud from charging case and it will auto connect.
• Earbuds can be used with or without boom mic, but the mic will improve the quality of your voice and reduce background sound in clear voice mode.
• Choosing the correct ear tip makes a significant improvement in audio quality due to proper seal for the driver. Try all ear tips for best results.

VOICE PROMPTS

“Ready to Pair” : Work Buds are ready to pair to Bluetooth device
“Battery Full” : 100-80%
“Battery Medium” : 80-20%
“Low Battery” : Less than 20%
When power decreases to 10%, “Low Battery” will play

DOWNLOAD THE APP

Customize JLab Work Buds features and update the latest software.
Download the JLab App in Apple/Google Play Store.

|
---|---
|

TROUBLESHOOTING

NO AUDIO IN ONE EARBUD OR EARBUDS DISCONNECTED (MANUAL RESET)

1. Keep earbuds in the charging dock and forget “JLab Work Buds” in your Bluetooth device settings.

2. Quick tap 7x on one earbud in charging case.
   Earbud blinks blue 4 times.

3. Quick tap 7x on other earbud in charging case.
   Earbud blinks blue 4 times.

4. Take both earbuds out of the charging case.
   One earbud will blink blue/white indicating ready to pair to your device.

Shop products | Product alerts | Burn-in your headphones

References

• JLab: True Wireless Headphones, Earbuds, Microphones, Personal Audio
• Contact Us – JLab
• Register Your Product – JLab

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>