EARPHONE CONNECTION EP-BTD-34EC-S-PTT Air Pro Wireless Harris Bluetooth Adaptor and Remote PTT Combo Kit for Wireless Earbuds User Manual
- June 4, 2024
- EarPhone Connection
Table of Contents
AIR PRO WIRELESS
HARRIS BLUETOOTH ADAPTER & REMOTE
PTT COMBO KIT FOR WIRELESS EARBUDS
Visit our YouTube Channel: EPC Headsets for videos about Pairing the Air Pro
Wireless PTT Combo Kit.
Next time you use the Air Pro Wireless, power up the radio & earbuds. Press
the pairing button on the radio adapter until it flashes Blue. then release.
When the radio adapter LED is solid Blue, the link has been established. Press
& hold the BTR PTT Button until LED appears, then release. The BTR will now
link within 10 seconds.
NOTES:
► To power down BTR, press and hold the PTT button until the LED turns RED. If
all devices are powered off the remote switch will automatically power down in
5 minutes.
► If no LED appears on the BTR when trying to pair, connect the USB cable to
charge for about 10 minutes, then try again. For all-day use. BTR should
charge for about 3.5 hours.
► Earbuds can be activated from the pairing button on the BTD radio adapter as
well.
► LED automatically shuts off after 15 seconds.
PAIRING INSTRUCTIONS:
- Pairing Earbuds to the Bluetooth Radio Adapter (BTD). Attach the Bluetooth Adapter to the radio. Hold down the pairing button on the radio adapter and turn on the radio at the same time. Keep holding until the adapter flashes Blue/Red, then release. Now it’s in a pairing state. Power up your Bluetooth earbuds and put them into a pairing state. When adio adapter LED is solid blue, pairing is complete. Power down the radio & earbuds. Check your personal earbud instructions for manual pairing.
- Pairing BTR Bluetooth Remote Switch with Bluetooth Radio Adapter (BTD). With the radio off, hold down the PI I button on the radio adapter making sure not to completely cover the LED. While holding down, turn on the radio at the same time until LED is flashing Blue/Red then release. Short press again then release. The LED will flash slowly Blue/Red. Now the radio adapter is in a pairing state. Next press & hold the PI I button on the remote switch until LED is flashing Blue/Red then release. When LEO on the radio adapter turns blue, pairing is complete. Now power up your earbuds. Wait about 15 seconds for everything to link up. Now you are ready to transmit.
To pair additional earbuds, repeat Step 1.
USE WITH ALL YOUR FAVORITE WIRELESS EARBUD BRANDS.
Wireless Earbuds Not Included
AIR PRO WIRELESS Pl I COMBO KIT FOR **HARRIS INCLUDES:
**
BTR REMOTE PI I SWITCH
MANUFACTURER’S LIMITED
WARRANTY
Your Sales Receipt is required to validate & obtain warranty services.
Your EPC product is warranted against internal defects in material or
workmanship. All of our earphones are warranted for 12 months. Hygiene
restrictions prevent us from extending our limited warranty to wearable parts
such as Fin Ultra” ear tips, earmolds, clear tubes & ear inserts. The warranty
is extended to the original purchaser only and does not cover the following:
Physical abuse
Improper maintenance of the unit
Damage from tugging or pulling
Frayed, torn, or exposed wires
*** Crushing or smashing in any way, shape, or form
General misuse of the item such as Excessive voltage, tampering with the unit,
or repairs attempted by someone other than the manufacturer will void the
MANUFACTURER’S LIMITED WARRANTY. The manufacturer reserves the right to
evaluate & refuse warranty based on their evaluation. In order to obtain
warranty services, proof of purchase must be returned along with the product.
For Returns Dept. & Return Authorization # Call Toll Free:
888-372-1888. After calling, send your
return along with your name address & Return Authorization # to:
The Earphone Connection, Inc.
25139 Avenue Stanford
Valencia, CA 91355
IMPORTANT SAFETY INFORMATION**
Earphone Connection, Inc. products are designed to produce a specific audio
output level at maximum rated power. Modifying these devices in any way
including adding or removing components and accessories may change the audio
output of the device and could result in PERMANENT HEARING DAMAGE.
Many countries have regulations defining the amount of noise that an
individual can be subjected to during a normal workday. Compliance is
application-dependent and standards vary. It is the SOLE RESPONSIBILITY of the
end user to determine applicability and compliance with local hearing
protection regulations.
Earphone Connection, Inc. strongly recommends that the radio is off before
installation of the audio accessory. Once the audio accessory is securely
installed radio can be turned on. The radio volume switch is recommended to be
set at a low position and adjusted once the radio is turned on.
TO CONNECT WIRED HEADSETS:
- Make sure the Bluetooth microphones are off.
- Hold the microphone cable above the arrow alignment mark.
- Align with an arrow on the adapter then click into place.
- To remove, pull up the spring-loaded cylindrical metal below the arrow on the cable.
Visit our YouTube Channel: EPC Headsets for
videos about Pairing the Air Pro Wireless PTT Combo Kit.
888.372.1888
www.earphoneconnect.com
25139 Avenue Stanford
Valencia, CA 91355
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>