akasa A-NUC77-A1B Cypher HDB User Manual
- June 11, 2024
- akasa
Table of Contents
User Manual
Product Code: A-NUC77-A1B / A-NUC77-M1B
Contents
1
x5
| 2
(Spare part x1)
(Pre-installed x 4)
| 3
(Pre-installed x1)
---|---|---
4
| 5
x3
| 6
x2
Front Panel
- Power Switch & LED light
- USB 2.0 Ports
Internal cable connectors
USB 2.0 Connector Front Panel Connector
Fan 4-pin Connector 24-pin PSU Connector
Connect the case internal cable connectors to the corresponding Compute
Element headers.
NOTE : If the connectors are not apparent on the board, do consult your
Compute Element manual. Connecting the panel to the wrong headers may result
in Compute Element damage.
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-
controlled workstation is not available, wear an antistatic wrist strap or
touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges
can cause injury if not handled with care. Keep away from children.
Installation
Component Tray Release
Component Tray Pullout
PSU Installation
Check the orientation of the PSU cable. Position the PSU hold bracket on position 1 or 2 which is on the opposite end of the cable.
Backplate Cover Removal
Intel® Compute Element-H
NUC 9th / NUC 11th
- NUC 9 Extreme/Pro
- NUC 11 Extreme
NUC 9 Extreme/Pro Connectors & Headers
Power Connector
Fan Connector (Pre-installed)
USB 2.0 Connector
Front Panel Header
NUC 11 Extreme Connectors & Headers
Power Connector
Fan-out Cable (Provided by Intel®)
Fan Connector (Pre-installed)
USB 2.0 Connector
Front Panel Header
Graphics Card
Baseboard Power Connector using 24-Pin to 10-Pin PSU Cable
Installation Complete
Documents / Resources
|
akasa A-NUC77-A1B Cypher
HDB
[pdf] User Manual
A-NUC77-A1B, A-NUC77-M1B, A-NUC77-A1B Cypher HDB Premium Fully Aluminium
Chassis, A-NUC77-A1B Cypher HDB, A-NUC77-A1B, Cypher HDB
---|---