ET2 Contemporary Lighting E31095-93PC Pipette 18 Inch 3-Light Pendant Instruction Manual

ET2 Contemporary Lighting E31095-93PC Pipette 18 Inch 3-Light Pendant

Product Information: General Lighting (Including AC LED)

The General Lighting product is a lighting fixture that includes AC LED technology. It is designed to provide illumination in various indoor settings. The product comes with hardware parts and requires assembly. The product package contains packaging materials that should be retained for future use. The product should be assembled in a clean, level, and spacious area, away from hard surfaces that may damage it. The product should not be over- tightened during assembly, and children should not play with it. The lamp care instructions must be read before assembly and use of the product.

Product Usage Instructions

1. Read the instructions carefully before assembling the product.
2. Use a sharp tool like a cutter knife to open the package, being careful not to damage the components inside.
3. Carefully remove all packaging materials and retain for future use.
4. Keep all hardware parts and packaging out of reach of small children.
5. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
6. Ensure that you have all required contents for complete assembly.
7. Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
8. Do not over tighten the screws and bolts as this may damage the threads.
9. Do not let children play with this product.
10. Disconnect from power source before assembling or cleaning.
11. Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
12. Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
13. Do not plug the product in if cord is torn or frayed.
14. Use appropriate cleansers for respective shade surfaces, i.e. glass cleaner, acrylic polish, and wood polish.
15. Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
16. Periodically (every 90 days) make sure that the screws are fully tightened.
17. Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Following these instructions will ensure safe and efficient usage of the General Lighting product.

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.
  Risk of suffocation!
  Keep any packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
• Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Contents

Before getting started ensure the package contains the following components:

Assembly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>