ET2 Contemporary Lighting E31099-93PC Pipette 17 Lights Pendant Instruction Manual
- June 9, 2024
- ET2 Contemporary Lighting
Table of Contents
ET2 Contemporary Lighting E31099-93PC Pipette 17 Lights Pendant Instruction
Manual
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
-
On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
-
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
-
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner. -
Periodically (every 90 days) make sure that the screws are fully tightened.
-
Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Contents
Before getting started ensure the package contains the following
components:
-
Mounting Bracket
-
Anchor Bolts
-
G9 LED Bulb
-
Pins
-
Long Glass
-
Short Glass
-
Wire nuts
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>