EATON ULTRALED 2-400 Autonomous Security Lighting Instruction Manual
- June 9, 2024
- EATON
Table of Contents
EATON ULTRALED 2-400 Autonomous Security Lighting
DIMENSIONS
PARTS
SEYMBOLS
Before use
OPERATING INSTRUCIONS
AUTOTEST
Charge / Charge|
---|---
Lampe / Lamp|
Batterie / Battery|
AFFICHAGE LED/LED DESCRIPTION
| Vert/ Green | OK | |
|---|---|---|
| Vert/ Green | TEST | |
| Vert & jaune/ Green & yellow | COM | |
| Jaune/ Yellow |
2 s.
|
Jaune/ Yellow|
0,5 s.
|
Fixe/ Constant| Clignotant/ Blinking
Disconnect the battery, wait for 10 seconds, and reconnect it if you decide to change configuration (step 4).
**OU OR** Voir notice de la télécommande TLU / See TLU user manual
230V ~ / 50-60Hz
IP43 / IK07
1H
LiFePO4 3.2V / 3Ah RONDA + JST
6 x LED 3V 900mA
**EN**60598.1 EN 60598.2.22 NFEN62034
NF NFC 71820 NF 413 NFC 71801 T19085
** Replaceable
Not replaceable** Battery pack, Order code: FT-BAT3
Cooper Sécurité SAS (Groupe EATON) is committed to ensuring the durability of the consumable parts (lamps and batteries) for 8 years from the date of the last placing on the market of the product.
If the battery duration is insufficient, replace the battery.
GENERAL SAFETY INSTRUCTIONS
- The luminaire is not suitable for private use.
- It can only be installed by a qualified electrician in compliance with the regulations on safety and prevention of accidents.
- The luminaire must be used in accordance with its intended use in a proper and undamaged condition.
- Remove all foreign objects from the device before its first use.
- When working on the luminaire, first turn off the power completely, ensure that it cannot be turned back on, and check if it is free of voltage. (The above applies to mains power, backup power and possibly control and external voltage.)
- Use only original spare parts for replacement.
- *Luminaires with this label must be positioned in such a way as to avoid staring in the light for a longer time from a short distance.
- **If the luminaire is damaged or if you notice any battery abnormalities such as high temperature, discoloration, distortion, or leakage, disconnect immediately the battery and contact your customer support.
Do not attempt to repair, disassemble or modify the battery. Replacing battery by an incorrect type could lead to explosion. Using third-party products may cause battery leakage, overheating or fires.
Do not place or use battery near fires, heaters, direct sunlight, or other heat sources. Prolonged exposure to heat may cause battery leakage, explosions, or fires.
Do not place pressure on or pierce the battery with hard objects. Damaging the battery could cause battery leakage, overheating, or fires.
Use the battery only with the luminaire intended for. Do not immerse the battery in water or other liquids. Do not dispose of the battery as household waste. Respect local regulations.
Plus d’informations sur www.recyclum.com
Eaton
Cooper Sécurité SAS
PEE II – Rue Beethoven – BP10184
63204 RIOM CEDEX FRANCE
Tél. +33 (0)825 826 212 (0,15 € TTC/min)
www.cooperfrance.com
www.eaton.com
Eaton
EMEA Headquarters
Route de la Longeraie 7
1110 Morges, Switzerland
Eaton.eu
© 2020 Eaton
All Rights Reserved
DEEE: Contacter votre revendeur local
Eaton.com/recycling
ZNO2050000 B- 02/2020
Eaton is a registered trademark.
All trademarks are property
of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>