PHILIPS Hue Smart Bulb Starter Kit

Product Information

The Philips Enrave M ceiling lamp is an IP44 rated luminaire that comes in three colors: white, black, and white. It has a maximum power consumption of 20W at 24V and includes several components such as screws, control gear-psu, light source-hue connect, light source-splitter, light source-led module, deco ring, diffuser, base, bracket, suspension cable, plate, and foil. The disassembly instructions for this product are provided below.

Product Usage Instructions

1. Always ensure the luminaire is detached from the mains socket before disassembly.
2. Always ensure the DC cable is detached from the power supply before disassembly.
3. Staring at the operating light source may cause eye injury.
4. Press and rotate the diffuser [12] by hand counterclockwise until it unsnaps. Lift the diffuser up to remove it from base [13].
5. Remove the deco ring [11] by lifting up from the base [13].
6. Unplug wires from the light source-led modules [5].
7. Unplug wires from the light source splitter [4].
8. Remove low voltage wires of Control gear-psu [2] from Light source-hue connect [3].
9. Remove the flat cable from the light source-splitter [4] and light source-hue connect [3].
10. Unscrew 1 screw [1] and remove light source-hue connection [3].
11. Unscrew 8 screws [1] and remove light source-led modules [5] and plates [16].
12. Unscrew 2 screws [1] and remove light source splitter [4].
13. Rotate bracket [14] by hand counterclockwise until it unsnaps. Lift bracket up to remove it from base [13].
14. Unscrew 1 screw [8] and remove terminal block [10] and foil [17].
15. Unscrew 1 screw [7] and remove suspension cable [15] and washer [10] from base [13].
16. Unscrew 1 screw [6] and remove it from bracket [14].
17. Unscrew 2 screws [7] and remove control gear-psu [2] from base [13].

Tools Required for Disassembly

Warnings

• Always make sure the luminaire is detached from the mains socket
• Always make sure the DC cable is detached from the power supply
• Staring at the operating light source may cause eye injury

Disassemble/dismantle steps

COMPONENT

1| COMPONENT

Screw

| QTY

11

---|---|---
2

3

| Control gear – psu

Light source – hue connect

| 1

1

4| Light source – splitter| 1
5| Light source -led module| 4
6| Screw| 1
7| Screw| 3
8| Screw| 1
9| Washer| 1
10| Terminal block| 1
11| Deco ring| 1
12| Diffuser| 1
13| Base| 1
14| Bracket| 1
15| Suspension cable| 1
16| Plate| 4
17| Foil| 1

SKU

SKU

915005996601

| Color

White

| Country

EU/UK

---|---|---
915005996701

915005997601

| Black

White

| EU/UK

EU/UK

ADDITIONAL INFORMATION

Documents / Resources

| PHILIPS Hue Smart Bulb Starter Kit [pdf] Installation Guide
Hue Smart Bulb Starter Kit, Hue, Smart Bulb Starter Kit, Starter Kit, Kit
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>