eurolite 51741075 LED Multi FX Laser Bar User Manual

eurolite 51741075 LED Multi FX Laser Bar

Product Information

The LED Multi FX Laser Bar is a lighting fixture that features several lighting effects including lasers, LED lights, and other special effects. It can be controlled using DMX512, operated in standalone mode, or with the included remote control IR-16. The device requires connection to the mains power supply and comes with various safety features to ensure safe usage. It is also designed with easy installation and maintenance in mind.

Product Features

• Multiple lighting effects including lasers and LED lights
• DMX512 control capability
• Standalone mode operation
• Included remote control IR-16
• Easy installation and maintenance

product Technical Specifications

• Power supply: AC 100-240V, 50/60Hz
• Power consumption: 40W
• Laser class: 3R
• DMX channels: 8
• Dimensions: 1000 x 120 x 75 mm
• Weight: 4.4 kg

Product Usage Instructions

Safety Instructions
Before using the LED Multi FX Laser Bar, please carefully read and follow all safety instructions provided in the user manual. This includes ensuring proper electrical grounding, avoiding exposure to laser radiation, and avoiding contact with movingparts. Do not use the device if it appears damaged or if there areany loose parts.

Installation

To install the LED Multi FX Laser Bar, follow the instructions provided in the user manual. This includes connecting the device to   the mains power supply, mounting it securely, and ensuring properventilation. The device should be installed in a dry andwell-ventilated area away from any flammable materials or liquids.

product Operation

The LED Multi FX Laser Bar can be operated in standalone mode using the buttons on the device or with the included remote control IR-16. It can also be controlled using DMX512. For more information on operating the device in these modes, please refer to the user manual.

product Cleaning and Maintenance

To clean and maintain the LED Multi FX Laser Bar, follow the instructions provided in the user manual. This includes replacing the fuse if necessary and regularly cleaning the device with a softdry cloth. Do not use any solvents or abrasive materials to clean the device.

product Protecting the Environment

Please dispose of the LED Multi FX Laser Bar according to local regulations to protect the environment. Do not dispose of the device in household waste.

DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires. Never open the housing. Keep the device away from rain and moisture.

• Please read these instructions carefully before using the product. They contain important information for the correct use of the product.

Every person involved with the installation, operation and maintenance of this device has to

• be qualified
• follow the instructions of this manual
• consider this manual to be part of the total product
• keep this manual for the entire service life of the product
• pass this manual on to every further owner or user of the product
• download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are sure that you will enjoy this device for a long period of time.

Product features
4in1 light effect with LED matrix, blacklight, RG laser and stroboscope

• Matrix effect with a total of 192 LEDs creates alternating RGB patterns
• 2 UV LEDs (3 W) for blacklight effects
• 36 cold white 0.5 W SMD LEDs for fast, dynamic strobe effects
• 4 laser diodes project thousands of red and green laser beams
• Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
• Matrix, blacklight, laser and strobe can be controlled individually
• Auto, music, master/slave and DMX mode
• 14 built-in auto and music show programs
• Addressing and setting via control panel with 4-digit LED display
• Convenient wireless control via included IR remote control EUROLITE IR-16
• Sound-control via built-in microphone with adjustable microphone sensitivity
• DMX512 control possible via any commercial DMX controller
• 2, 5 or 10 DMX channels selectable for various applications
• Swivel mounting bracket
• Feed-through output allows to power up to 8 devices

SAFETY INSTRUCTIONS

WARNING!
Please read the safety warnings carefully and only use the product as describe in this manual to avoid accidental injury or damage.

Intended use

• This device is a laser projector for creating decorative lighting effects. This device is designed for professional use in the field of event technology, e.g. on stage. It is not suitable for household lighting.
• Only use the device according to the instructions given herein. Damages due to failure to follow these operating instructions will void the warranty! We do not assume any liability for any resulting damage.
• We do not assume any liability for material and personal damage caused by improper use or non-compliance with the safety instructions. In such cases, the warranty/guarantee will be null and void.
• Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the warranty invalid.

Danger due to electricity

• The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store it in rooms exposed to moisture.
• To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the device.
• Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never defeat the protective ground of a mains cable. Failure to do so could result in damage to the device and possibly injure the user.
• The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
• The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
• Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
• Unplug the device during lighting storms, when unused for long periods of time or before cleaning.
• Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations or heavy mechanical stress.
• Do not place any objects filled with liquids on the device.
• Do not place any open sources of fire, such as burning candles, on or directly next to the device.
• Make sure that objects cannot fall into the device, in particular metal parts.
• Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
• Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free and moistened cloth. Never use solvents or aggressive detergents.

Danger to children and people with restricted abilities

• This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
• This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Warning – risk of burns and fire

• The admissible ambient temperature range (Ta) is -5 to +45°C. Do not operate the device outside of this temperature range.
• The housing temperature (Tc) can be up to 60°C during use. Avoid contact by persons and materials.
• Do not illuminate surfaces within 1 m of the device. This value is indicated on the device by the symbol.
• Do not use the device near highly flammable materials. Always place the device at a location where sufficient air circulation is ensured. Leave 50 cm of free space around the device. Never cover the air vents of the housing.

Warning – risk of injuries

• Do not look directly at the light source. Persons with light-sensitive epilepsy may suffer from epileptic seizures or fall unconscious.
• Make sure that the product is set up or installed safely and expertly and prevented from falling down. Comply with the standards and rules that apply in your country, in particular EN 60598-2-17.
• If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper installation can result in bodily injury and or damage to property.
• The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety precautions.
• For overhead use, always secure the device with a secondary safety attachment such as a safety bond or safety net.
• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
• For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.

Caution – material damage

• This device must not be connected to the mains voltage by means of a dimmer.
• Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects.
• Never switch the device on and off at short intervals. This will considerably reduce the service life of the device.
• If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The resulting condensation may destroy the device. Allow the device to reach room temperature before connecting it. Wait until the condensation has evaporated.
• Please use the original packaging to protect the device against vibration, dust and moisture during transportation or storage.
• If a serial number label is affixed to the device, do not remove the label as this would make the guarantee void.

About batteries

• Do not try to short-circuit, recharge, disassemble or heat batteries (danger of explosion!).
• Remove the batteries if the device is not used for a longer period of time.
• Damaged/leaking batteries may cause harm to your skin–use safety gloves.

Important information for laser products

DANGER!
Avoid direct eye exposure. Never view directly with optical instruments (e.g. magnifying lens or telescope). Laser radiation can cause eye damage and/or skin damage. All protective measures for a safe operation of this laser must be applied.

Safety measures which must be observed

• This device includes a class 2M laser according to the EN 60825-1. The accessible laser radiation is exclusively within the visible spectral range (400 nm to 700 nm). However, a short-term exposure (max. 0.25 seconds) is not hazardous to the eye. A longer exposure is prevented by the natural eyelid closing reflex. Nevertheless, close your eyes or turn away immediately if the laser beam hits the eye. The corresponding warning is attached to the housing.
• The operator must comply with the country-specific accident prevention regulations of the government safety organization for electrical facilities.
• The corresponding accident prevention regulation of the accident prevention and insurance association in Germany is BGV-B2.
• This product must only be mounted, commissioned and operated by suitably qualified specialist personnel and only under observance of the requirements stated in the operating instructions.
• The use of operating and adjustment equipment and procedures other than those indicated here can lead to dangerous exposure to radiation.
• Do not stare into the laser beam and do not aim the laser at another person or animals. Laser radiation may result in injuries to the eyes or skin.
• Do not look into the laser beam with optical instruments (e.g. magnifying glasses
• or binoculars) under any circumstances. Laser radiation can cause eye damage and/or skin damage.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected beam may strike people or animals.
• Always set up and install the unit so that a minimum distance of 1 m is kept between the laser light and the audience.
• Mark the area where this laser equipment is used by means of barriers and warning signs etc.
• Caution laser diode! Do not open or modify the unit. A modification can result in a more hazardous laser radiation which considerably deviates from the specified values.

DESCRIPTION OF THE DEVICE

1. SMD LEDs
2. Laser output aperture
3. RGBAW LEDs
4. UV LEDs
5. Infrared sensor for the remote control
6. Safety eyelet
7. DMX output
8. DMX input
9. Indicator for DMX mode
10. Indicator for sound control
11. Display with operation buttons
12. Indicator for automatic mode
13. Indicator for slave mode
14. Microphone
15. Rotary control for sensitivity
16. Mounting bracket
17. Fixation screw
18. Power output
19. Power input
20. Fuse holder

INSTALLATION

WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the device is installed securely and cannot fall down. The installation must be carried out by a specialist who is familiar with the hazards and the relevant regulations.

DANGER! Damage caused by laser radiation
Observe the chapter safety instructions when installing the device.

The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must never be fixed swinging freely in the room.

1. The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.

2. Block access below the work area and work from a stable platform when installing the device.

3. Use rigging hardware that is compatible with the structure and capable of bearing the weight of the device. Please refer to the “Accessories” section for a list of suitable rigging hardware.

4. Secure the device with a safety bond or other secondary attachment. This secondary safety attachment must be sufficiently dimensioned in accordance with the latest industrial safety regulations and constructed in a way that no part of the installation can fall down if the main attachment fails. An appropriate eyelet is mounted on the device for fixation of the safety bond. Fasten the safety bond in such a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.

5. To align the device, release the fixation screws at the mounting bracket, adjust the desired
   inclination angle and retighten the fixation screws.

6. Make sure not to point the laser beams at highly reflective surfaces such as mirror balls, windows
   and shiny objects. As a precaution, remove or cover up highly reflective objects in order to avoid laser reflections.

7. After installation, the device requires inspections periodically to prevent the possibility of rot, deformation and looseness.

CONNECTIONS

DMX512 control
A DMX512 data link is required in order to control the device via DMX. The device provides 3-pin XLR connectors for DMX connection.

1. Connect the output of your DMX controller to the DMX input DMX IN of the light set with a DMX cable.
2. Connect the DMX output DMX OUT of the light set to the DMX input of the next unit in the chain. Always connect one output to the input of the next unit until all units are connected.
3. At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between Signal (–) and Signal (+) in the DMX output of the last unit.
4. If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended to insert a DMX level amplifier to ensure proper data transmission.

XLR connection:

Connection to the mains
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.

1. Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2. To switch off the unit, disconnect the power plug.
3. Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains outlet that is switchable.

Power supply of further devices
The jack POWER OUT allows for power supply of further devices. To interconnect several devices, connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected. Matching power cables with IEC plugs are available as accessories. In this manner, up to 8 devices can be linked at 230/240 input voltage and up to 4 devices at 110/115 input voltage.

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating mode. The operating modes can be selected by means of the display and the control buttons. All settings  remain stored even if the device is disconnected from the mains. The device can be operated in stand-alonemode via the control board and the EUROLITE IR-16 remote control or in DMX-controlled mode via any commercial DMX controller.

Operating buttons

Menu structure Default settings in grey

mode)
| S.01-S.100 Speed (increasing)
SOU| SO01 – SO14| Sound controlled programs (Master mode)

DMX

| ****

dXXX

| ****

2CH

5CH

10CH

| ****

d 001-d 511

d 001-d 508

d 001-d 503

| Setting DMX channel mode DMX address setting

2-Channel DMX Mode

5-Channel DMX Mode 10-Channel DMX Mode

SLA| Slav| Setting for the Slave device

SYS

| LEDS ***| ON OFF| Display energy saving mode on Display energy saving mode off
LEDr| ON**

OFF

| Display setting

With this function you can to turn the display upside down

SOUN

| LAST| Most recent light effect is held; Laser off
oFF| LEDs are switched off
REST| YES

NO

| Restore factory default

• When ON, the display shows a dot after 30 seconds of inactivity

Stand-alone mode
Operation without external control
In automatic mode, 14 show programs are available that run at an adjustable speed or sound-controlled via the built-in microphone, if desired.

Automatic mode

1. Press the button MENU so many times until AUT appears on the display and confirm with ENTER.
2. Use the buttons UP and DOWN to select the number of the desired program (AU01-AU14).
3. Confirm with the ENTER button. The display indicates the menu item’s running speed.
4. Use the buttons UP and DOWN to adjust the running speed of the program from S.01 (slow) to S.100 (fast).
5. Confirm with the ENTER button.

Sound control

1. Press the button MENU so many times until SOU appears on the display and confirm with ENTER.
2. Use the buttons UP and DOWN to select the number of the desired program (SO01- SO14).
3. Confirm with the ENTER button.
4. Adjust the microphone sensitivity to the volume of the music with the SENSITIVITY rotary dial. The LEDs and the laser will switch off after 5 seconds if the volume is too low or if there is no sufficient bass beat.

Master/slave operation with several laser bars
When several devices are interconnected, the slave units can be synchronized and controlled with the
master unit. The units must be set to the corresponding operating modes.

1. Set all slave units to slave mode: Press the button MENU so many times until SLA appears on the display. Confirm with the ENTER button.
2. Set the master unit to the desired show program. The interconnected show lasers will now operate synchronously.

Remote control IR-16
The IR remote control allows convenient control of the integrated show programs in automatic mode or sound-controlled mode. Press the buttons repeatedly to switch between the programs. The display indicates the current setting. When actuating a button, always hold the remote control in the direction of the sensor at the control unit’s front or rear. There must be visual connection between the remote control and the sensor.

Note: Operation via IR remote control not possible in DMX or slave mode.

Notes:

• The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery contacts prevents the battery from being discharged during storage. Prior to the first operation remove the foil from the battery support on the rear side of the remote control. Otherwise, operation of the remote control is not possible.
• If the range of the remote control decreases, replace the battery. For this purpose, on the rear side of the remote control press the small bar with the groove to the right and at the same time remove the battery support. For operation, one 3 button cell type CR 2025 is required. When inserting, pay attention that the positive pole of the button cell shows upwards in the support.
• Remove the battery from the remote control as a precaution if the device is not used for a longer period of time.

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with max. 10 control channels. However, it can also be switched to a mode with 2 or 5 channels if different functions are required. To be able to operate the device with a DMX controller, the DMX starting address must be set. The starting address depends upon which DMX controller is being used. Please refer to the controller’s documentation.

1. Press the MENU button so many times until DMX appears on the display. Confirm with the ENTER button. The display next shows dXXX, please confirm again with ENTER.
2. The display then indicates 2 CH (2 DMX channels), 5 CH (5 DMX channels) or 10 CH (10 DMX channels). Use the buttons UP and DOWN to select the desired DMX channel mode. Confirm with the ENTER button.
3. For the DMX start address press the MENU button until dXXX is shown on the display. Use the buttons UP and DOWN to set the address. Confirm with the ENTER button.
4. The red LED next to the display will blink when DMX signals are being received. If no control signals are available, the red LED next to the display will not blink.

Note: Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX chain. If several devices are addressed similarly, they will work synchronically.

Functions in DMX mode

2-Channel-Mode

1

MIX SHOW

| 000 – 005| No function
006 – 022| Program 1
023 – 040| Program 2
041 – 058| Program 3
059 – 076| Program 4
077 – 094| Program 5
095 – 112| Program 6
113 – 129| Program 7
130 – 147| Program 8
148 – 165| Program 9
166 – 183| Program 10
184 – 201| Program 11
202 – 219| Program 12
220 – 237| Program 13
238 – 255| Program 14
2

SPEED

| 000 – 250| Increasing
251 – 255| Sound control

5-Channel-Mode

1

UV

| 000 – 005| No function
006 – 055| Program| 1
056 – 105| Program| 2
106 – 155| Program| 3
156 – 205| Program| 4
206 – 255| Program| 5

2

MATRIX

| 000 – 005| No function
006 – 013| Program| 1
014 – 021| Program| 2
022 – 029| Program| 3
030 – 037| Program| 4
038 – 045| Program| 5
046 – 053| Program| 6
054 – 061| Program| 7
062 – 069| Program| 8
070 – 077| Program| 9
078 – 085| Program| 10
086 – 093| Program| 11
094 – 101| Program| 12
102 – 109| Program| 13
110 – 117| Program| 14
118 – 125| Program| 15
126 – 133| Program| 16
134 – 141| Program| 17
142 – 149| Program| 18
150 – 157| Program| 19
158 – 165| Program| 20
166 – 173| Program| 21
174 – 181| Program| 22
182 – 189| Program| 23
190 – 197| Program| 24
198 – 205| Program| 25
206 – 213| Program| 26
214 – 221| Program| 27
222 – 229| Program| 28
230 – 237| Program| 29
238 – 245| Program| 30
246 – 255| Program| 31

3

LASER

| 000 – 005| No function
006 – 040| Program| 1
041 – 076| Program| 2
077 – 112| Program| 3
113 – 147| Program| 4
148 – 183| Program| 5
184 – 219| Program| 6
220 – 255| Program| 7

4

WHITE SMDs

| 000 – 005| No function
006 – 027| Program| 1
028 – 050| Program| 2
051 – 073| Program| 3
074 – 095| Program| 4
096 – 118| Program| 5
119 – 141| Program| 6
| 142 – 163| Program 7
---|---|---
164 – 186| Program 8
187 – 209| Program 9
210 – 232| Program 10
233 – 255| Program 11
5

SPEED

| 000 – 250| Increasing
251 – 255| Sound control

10-Channel-Mode

3

STROBE-EFFEKT UV

| 000 – 250| Strobe with increasing speed
251 – 255| Sound control strobe

4

MATRIX

| 000 – 005| No function
006 – 013| Program 1
014 – 021| Program 2
022 – 029| Program 3
030 – 037| Program 4
038 – 045| Program 5
046 – 053| Program 6
054 – 061| Program 7
062 – 069| Program 8
070 – 077| Program 9
078 – 085| Program 10
086 – 093| Program 11
094 – 101| Program 12
102 – 109| Program 13
110 – 117| Program 14
118 – 125| Program 15
126 – 133| Program 16
134 – 141| Program 17
142 – 149| Program 18
150 – 157| Program 19
158 – 165| Program 20
166 – 173| Program 21
174 – 181| Program 22
182 – 189| Program 23
190 – 197| Program 24
198 – 205| Program 25
206 – 213| Program 26
214 – 221| Program 27
222 – 229| Program 28
230 – 237| Program 29
238 – 245| Program 30
246 – 255| Program 31
5

SPEED

| 000 – 250| Increasing speed of the programs from CH4
251 – 255| Sound control

6

LASER

| 000 – 005| No function
006 – 048| Red
049 – 089| Green
090 – 131| Red + green
| 132 – 173| Red strobe + green| Setting via

CH7

---|---|---|---
174 – 215| Red + green strobe
216 – 255| Red strobe + green strobe alternating
7

LASER STROBE

| 000 – 005| No function
006 – 250| Increasing speed of the programs from CH6
251 – 255| Sound control strobe

8

LASER ROTATION

| 000 – 000| Stop
001 – 127| Clockwise with increasing speed
128 – 128| Stop
129 – 255| Counterclockwise with increasing speed

9

WHITE SMDs

| 000 – 005| No function
006 – 027| Program 1
028 – 050| Program 2
051 – 073| Program 3
074 – 095| Program 4
096 – 118| Program 5
119 – 141| Program 6
142 – 163| Program 7
164 – 186| Program 8
187 – 209| Program 9
210 – 232| Program 10
233 – 255| Program 11
10

SPEED

| 000 – 250| Increasing speed of the programs from CH9
251 – 255| Sound control

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.

1. Disconnect the device from power and allow it to cool before cleaning.
2. Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may damage the surface. Make sure that no liquids can enter the device.
3. The device must be dry before reapplying power.

There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as this may result in damage. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts. Should you have further questions, please contact your dealer.

Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

1. Disconnect the device from power and allow it to cool.
2. Open the fuse holder of the mains connection with a fitting screwdriver.
3. Remove the old fuse from the fuse holder and replace it with a new fuse.
4. Carefully push the fuse holder back into its position before reapplying power.

PROTECTING THE ENVIRONMENT

Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for disposal which is not harmful to the environment. Devices marked with this symbol must not bedisposed of as household waste. Contact your retailer or local authorities for more information. Remove any inserted batteries and dispose of them separately from the product.

You as the end user are required by law (Battery Ordinance) to return all used batteries/ rechargeable batteries. Disposing of them in household waste is prohibited. You may returyour used batteries free of charge to collection points in your municipality and anywhere where batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly, you contribute to the protection of the environment.

TECHNICAL SPECIFICATIONS

cord with safety plug (provided)
Power output:| 1 x IEC connector (F) mounting version
Fuse:| 5 x 20 mm, T 1 A Fuse replaceable
Lamp type:| LED lamp

LED:

| Strobe effect 36 x SMD 0,5 W cold white (CW)
UV effect 2 x high-power 3 W ultra violet (UV)
Matrix effect 192 x 5 mm  R/G/B/W/A
Laser class:| Class 2M
Laser color:| R/G
Laser module:| Green (G) 30 mW 532nm
Red (R) 100 mW 650nm
DMX channels:| 2; 5; 10
DMX input:| 1 x 3-pin XLR (M) mounting version
DMX output:| 1 x 3-pin XLR (F) mounting version
Cooling:| Cooling fan

Control:

| Stand-alone; DMX; Sound to light via Microphone; Master/slave function; EUROLITE LED PC-Control 512 software
Housing color:| Black
Display type:| Monochrome 4 digits 7-segment LED display

Dimensions:

| Length: 76 cm
Depth: 18 cm
Height: 24.5 cm
Weight:| 5.60 kg
Noise classification:| Class 3 (clearly perceptible sounds)
|
Remote control|
Battery:| 1 x Button cell 3.0 V CR2025 lithium manganese built-in

Accessories

All information is subject to change without prior notice. © 03.02.2022

Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany  D00111950 Version 1.2 Publ. 03/02/202

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>