PORSCHE 9Y0044050-B LED Lamp Set Instruction Manual

9Y0044050-B LED Lamp Set
Instruction Manual

9Y0044050-B LED Lamp Set

SAFETY – EXPLANATION OF NOTES

Please take note of the following symbols and words used in the operating instructions, on the product and on the packaging:

PROPER USE
The product serves as a mobile light source and is not intended for use in other applications. The product is not suitable for household room lighting and only for use as
described in the operating instructions. Use outside that stipulated in the information is improper use and this can result in damage to property or personal injury. We accept no liability for damage caused by incorrect or improper use.

WARNING

GENERAL SAFETY INSTRUCTIONS

• This product may be used by children from the age of 8 and by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they have been instructed on the safe use of the product and are aware of the hazards. Children are not permitted to play with the product. Children are not permitted to carry out cleaning or care without supervision.
• Keep the product and the packaging away from children. This product is not a toy. Children should be supervised in order to ensure that they do not play with the product or packaging.
• Avoid eye injuries – Never look directly into the beam of light or shine it into other people’s faces. If this occurs for too long, the blue light portion of the beam can cause retinal damage.
• Never touch a device that is connected to the mains with wet hands, or if it has fallen into water. In this case, the house circuit breaker and then pull out the mains plug.
• Do not expose to potentially explosive environments where there are liquids, dusts or gases.
• Never submerge the product in water or other liquids.
• Do not kink the connection cable, do not pull it, or taut it or allow it to come into contact with sharp objects, chemicals or solvents.
• Use only an easily accessible mains socket so that the product can be quickly disconnected from the mains in the event of a fault.
• All illuminated objects must be at least 10 cm away from the lamp.
• Use the product exclusively with the accessories included with it.
• Never try to open, crush or heat a standard/rechargeable battery or set it on Do not throw into fire.
• The product may only be charged in closed, dry and spacious rooms, away from combustible materials and liquids. Disregard can result in burns and es.
• Leaking battery an cause irritation if it comes into contact with the skin. Immediately rinse aected areas with fresh water and then seek medical attention.
• Do not short-circuit connection terminals or batteries.

WARNING
DANGER OF FIRE AND EXPLOSION

• Do not use while still in the packaging.
• Do not cover the product – risk of e.
• Never expose the product to extreme conditions, such as extreme heat/cold etc.
• Do not use in the rain or in damp areas.

CAUTION
GENERAL NOTE

• Do not throw or drop it.
• The LED cover cannot be replaced. If the cover is damaged, the product must be disposed of.
• The LED light source cannot be replaced. If the LED has reached the end of its service life, the complete lamp must be replaced.
• Do not open or modify the product! Repair work shall only be carried out by the manufacturer or by a service technician appointed by the manufacturer or by a similarly qualid person.
• Disconnect the device from the power supply only by pulling on the plug or plug housing, never on the cable.
• Information for the light and mains adapter as well as mains voltage on the socket must match with the type plate.
• The lamp shall not be placed face-down or allowed to topple face-down.

CAUTION
RECHARGEABLE BATTERY PACK

• The product contains a non-replaceable, rechargeable battery pack. If the rechargeable battery pack is empty, recharge it immediately.
• Once fully charged, remove from the charger.
• In the event of liquid leaking from the power source, remove this with protective gloves and a dry cloth.

**** ENVIRONMENTAL INFORMATION | DISPOSAL

Dispose of packaging a sorting by material type. Cardboard to the waste paper and the recycling collection.

**** Dispose of the unusable product in accordance with legal provisions. The “waste bin” symbol indicates that, in the EU, it is not permitted to dispose of electrical equipment in household waste. Use the return and collection systems in your area or contact the dealer from whom you purchased the product.
For disposal, pass the product on to a specialist disposal point for old equipment. Do not dispose of the appliance with household waste.

**** Always dispose of used batteries /rechargeable batteries in accordance with the local regulations and requirements.
Batteries and rechargeable batteries contained in electrical appliances must be disposed of separately whenever possible.
Only dispose of batteries and rechargeable batteries in discharged condition.
Improper disposal may result in toxic substances being released into the environment, which may have harmful eects on humans, animals and plants.
Before disposing of lithium batteries and rechargeable batteries, tape o the terminals to prevent an external short circuit. A short circuit can lead to a e or explosion.
In this way you will fulyour legal obligations and contribute to environmental protection.

PRODUCT DESCRIPTION

Rechargeable battery handle incl. li-ion rechargeable battery (A/Base unit)

1. Locks
2. On/o button
3. Micro-USB charge socket with rubber cover
4. Charge and capacity indicator
5. Integrated magnet
6. Integrated hook, can be swivelled through 360°

Workshop lights attachment Slim (B)

1. Rotating base unit contact element
2. Swivel joint (swivels 180°/rotates 360°)
3. Work light
4. Directional light

Inspection lamp attachment Flex (C)

1. Rotating base unit contact element
2. Flexible lamp neck
3. Focusable lamp head with integrated magnet

Torch attachment (D)

1. Rotating base unit contact element
2. Swivel joint (swivels 180°/rotates 360°)
3. Focusable lamp head

Powerbank attachment (E)

1. Rotating base unit contact element
2. USB output socket

Suction cup holder (F)

FIRST USE

1. Before use, select the desired attachment (B/C/D/E).
2. Fit the two locks on the rotating contact element into the openings on the rechargeable battery handle (A/Base unit), hold the base unit and turn the attachment’s rotating contact clockwise until both elements connect together with an audible click.
3. The on/o button is on the back of the base unit.

Using the workshop lamp attachment (B):

Using the inspection lamp attachment (C):

Using the torch attachment (D):

Using the Powerbank attachment (E):

1. Connect the Powerbank module to the battery handle.
2. Press the ON/OFF button.
3. Connect the charging cable to the device to be charged and plug the charging cable into the USB socket on the Powerbank module.

Devices with a max. charge current of 1000 mA can be charged with the USB charge port.
Suction cup holder – Instructions for use (F):

NOTICE

IMPORTANT INFORMATION

• Max. weight to be borne is 1500 g.
• Max. absorption time (suction function) 5 hours.
• Mounting surfaces must be clean, greasefree and dry.
• Dierent air pressure or temperature dierences can ine the hold of the suction cup.
• Vibrations can aect the grip and the suction cup can come loose.

1. Use only on smooth, even and clean surfaces.
2. Place the underside of the suction cup on the surface and press down lightly.
3. Press the handle holder towards the holder so that the rubber o f the suction cup side is pulled inwards and a vacuum is created.
4. Check the suction cup has a secure hold on the surface.
5. Insert lamp module into the holder.
6. Insert the hook-and-loop tape into both eyelets of the holder.
7. Tighten the hook-and-loop tape slightly and close it in an appropriate position.

Care information:
Always keep the rubber side of the suction cup clean. If dirty, clean with a damp cloth and a little washing-up liquid if necessary.

NOTICE
Charging process:

Charge the rechargeable battery handle (base unit A) fully before ikewise, when storing over an extended period of time, charge beforehand and charge at least 2x per year during storage in order to prevent the rechargeable battery pack deep-discharging.
To do so, pull the sealing cap out of the charge socket on the rear of the housing and plug in the charge plug. Then connect the charging cable to the USB charging port.

**** Charge only when switched o. Do not charge and use the light at the same time!

LED rechargeable battery indicator on the rear of the housing (base unit A) via status LEDs:
Charge status:
The illuminated indicator LEDs show the charge status. The charging process is indicated by an LED
Remaining capacity indication:
The number of illuminated indicator LEDs indicates the remaining battery capacity.

CAUTION
Holding devices (hooks, magnets):
If the light is to be fastened with the integrated holding device, ensure that the holding device is /properly fastened in place.

Liability disclaimer:
The information contained within these operating instructions can be changed without prior notiation. We accept no liability for direct, indirect, incidental or other damage or consequential damage arising though improperhandling or through disregard of the information contained within these operating instructions. We accept no liability or warranty claims or guarantee claims in the event of incorrect use of the light.

Guarantee:
The warranty does not apply to damage to the appliance arising through failure to comply with the operating instructions. Your statutory warranty rights are not aected by this.

The product complies with the requirements from the EU directives
**** Porsche Cars Great Britain Ltd.
Bath Road, Calcot, Reading, Berkshire,
RG31 7SE
United Kingdom

Customer service:
Dr. Ing. h.c. F. Porsche AG
Porscheplatz 1
70435 Stuttgart
Germany

Subject to technical changes. We assume no liability for printing errors.
MA-9Y0.044.050/V2/05-2022

Technical data

Technical data:| Rechargeable battery handle (A):| Workshop light (B):| Inspection lamp (C):| Torch (D):| Powerbank module (E):
---|---|---|---|---|---
Article no.:| 910.044.051| 910.044.052| 910.044.054| 910.044.053| 91’0.044.055
Illuminants:| | 6W COB-LED + 1W LED| 1W LED| 5W LED|
Input voltage:| 5 V| | | |
Input current| 1000 mA| | | |
U-ion rechargeable battery:| 3.7 V12600 mAh 9.62 Wh| | | |
USB output voltage:| | | | | 5 V
USB output current:| | | | | max. 1000 mA
Luminous flux:| | 100% 600 Im
50% 3001m
TOP-LED: 100 Im| | 100% 300 Im 50% 1601m|
Battery life:| | 100% 2.0 h 50% 3.5 h TOP-LED: 11 h| 10 h| 100%3.5 h 50% 6.5 h|
Charge time:| 4.0 h| | | |
Colour rendering index CRI:| | Main: Ra >8016500 k TOP: Ra >7016500 k| Ra

7016500 k| Ra 7017200 k|
Protection type:| IP20 11P44′| IP20 11P44| IP20 1 IP44| IP20 I IP44| IP20
Protection class:| III| | | |
Storage temperature:| 0 °C 30 °C| 0 °C 30 °C| 0 °C 30 °C| 0 °C 30 °C|
Charging temperature :| 0 °C … 40 °C| 0 °C … 40 °C| 0 °C …40 °C| 0 °C … 40 °C| 0 °C 40 °C
Operating temperature :| -10 °C 40 °C| -10 °C 40 °C| -10 C 40 °C| -10 °C 40 °C| -10 °C 40 °C
Weight:| 197 g| 91 g| 84 g| 102 g| 28 g
Dimensions:| 132 x 57 x 42 mm| 230 x 39 x 39 mm| 364 x 39 x 39 mm| 94 x 41.5 x 41.5 mm| 50 x 25.9 x29 mm
USB cable:| 100 cm| | | |
Material:| TPU + PC| Alu + TPU + ABS| Alu + Nylon| Alu + Nylon| Nylon

(*IP44 only if module A has been correctly connected with another module (B/C/D))

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>